Initial commit

target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c

@@ -0,0 +1,140 @@
+
+/*
+ * Qualcomm Atheros AP152 reference board support
+ *
+ * Copyright (c) 2015 Qualcomm Atheros
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define AP152_GPIO_LED_USB0		7
+#define AP152_GPIO_LED_USB1		8
+
+#define AP152_GPIO_BTN_RESET            2
+#define AP152_GPIO_BTN_WPS              1
+#define AP152_KEYS_POLL_INTERVAL        20     /* msecs */
+#define AP152_KEYS_DEBOUNCE_INTERVAL    (3 * AP152_KEYS_POLL_INTERVAL)
+
+#define AP152_MAC0_OFFSET               0
+#define AP152_WMAC_CALDATA_OFFSET       0x1000
+
+static struct gpio_led ap152_leds_gpio[] __initdata = {
+	{
+		.name		= "ap152:green:usb0",
+		.gpio		= AP152_GPIO_LED_USB0,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap152:green:usb1",
+		.gpio		= AP152_GPIO_LED_USB1,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button ap152_gpio_keys[] __initdata = {
+	{
+		.desc		= "WPS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = AP152_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP152_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = AP152_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP152_GPIO_BTN_RESET,
+		.active_low	= 1,
+	},
+};
+
+static struct ar8327_pad_cfg ap152_ar8337_pad0_cfg = {
+	.mode = AR8327_PAD_MAC_SGMII,
+	.sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data ap152_ar8337_data = {
+	.pad0_cfg = &ap152_ar8337_pad0_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+};
+
+static struct mdio_board_info ap152_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &ap152_ar8337_data,
+	},
+};
+
+static void __init ap152_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap152_leds_gpio),
+				 ap152_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, AP152_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(ap152_gpio_keys),
+					ap152_gpio_keys);
+
+	ath79_register_usb();
+
+	platform_device_register(&ath79_mdio0_device);
+
+	mdiobus_register_board_info(ap152_mdio0_info,
+				    ARRAY_SIZE(ap152_mdio0_info));
+
+	ath79_register_wmac(art + AP152_WMAC_CALDATA_OFFSET, NULL);
+	ath79_register_pci();
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP152_MAC0_OFFSET, 0);
+
+	/* GMAC0 is connected to an AR8337 switch */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_mask = BIT(0);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+	ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP152, "AP152", "Qualcomm Atheros AP152 reference board",
+	     ap152_setup);