Initial commit

target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c

@@ -0,0 +1,191 @@
+/*
+ *  D-Link DIR-825 rev. B1 board support
+ *
+ *  Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
+ *
+ *  based on mach-wndr3700.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define DIR825B1_GPIO_LED_BLUE_USB		0
+#define DIR825B1_GPIO_LED_ORANGE_POWER		1
+#define DIR825B1_GPIO_LED_BLUE_POWER		2
+#define DIR825B1_GPIO_LED_BLUE_WPS		4
+#define DIR825B1_GPIO_LED_ORANGE_PLANET		6
+#define DIR825B1_GPIO_LED_BLUE_PLANET		11
+
+#define DIR825B1_GPIO_BTN_RESET			3
+#define DIR825B1_GPIO_BTN_WPS			8
+
+#define DIR825B1_GPIO_RTL8366_SDA		5
+#define DIR825B1_GPIO_RTL8366_SCK		7
+
+#define DIR825B1_KEYS_POLL_INTERVAL		20	/* msecs */
+#define DIR825B1_KEYS_DEBOUNCE_INTERVAL		(3 * DIR825B1_KEYS_POLL_INTERVAL)
+
+#define DIR825B1_CAL0_OFFSET			0x1000
+#define DIR825B1_CAL1_OFFSET			0x5000
+#define DIR825B1_MAC0_OFFSET			0xffa0
+#define DIR825B1_MAC1_OFFSET			0xffb4
+
+#define DIR825B1_CAL_LOCATION_0			0x1f660000
+#define DIR825B1_CAL_LOCATION_1			0x1f7f0000
+
+static struct gpio_led dir825b1_leds_gpio[] __initdata = {
+	{
+		.name		= "d-link:blue:usb",
+		.gpio		= DIR825B1_GPIO_LED_BLUE_USB,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:orange:power",
+		.gpio		= DIR825B1_GPIO_LED_ORANGE_POWER,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:blue:power",
+		.gpio		= DIR825B1_GPIO_LED_BLUE_POWER,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:blue:wps",
+		.gpio		= DIR825B1_GPIO_LED_BLUE_WPS,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:orange:planet",
+		.gpio		= DIR825B1_GPIO_LED_ORANGE_PLANET,
+		.active_low	= 1,
+	}, {
+		.name		= "d-link:blue:planet",
+		.gpio		= DIR825B1_GPIO_LED_BLUE_PLANET,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR825B1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DIR825B1_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
+	{ .reg = 0x06, .val = 0x0108 },
+};
+
+static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
+	.gpio_sda	= DIR825B1_GPIO_RTL8366_SDA,
+	.gpio_sck	= DIR825B1_GPIO_RTL8366_SCK,
+	.num_initvals	= ARRAY_SIZE(dir825b1_rtl8366s_initvals),
+	.initvals	= dir825b1_rtl8366s_initvals,
+};
+
+static struct platform_device dir825b1_rtl8366s_device = {
+	.name		= RTL8366S_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &dir825b1_rtl8366s_data,
+	}
+};
+
+static bool __init dir825b1_is_caldata_valid(u8 *p)
+{
+	u16 *magic0, *magic1;
+
+	magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET);
+	magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET);
+
+	return (*magic0 == 0xa55a && *magic1 == 0xa55a);
+}
+
+static void __init dir825b1_wlan_init(void)
+{
+	u8 *caldata;
+	u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
+	u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
+
+	caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0);
+	if (!dir825b1_is_caldata_valid(caldata)) {
+		caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1);
+		if (!dir825b1_is_caldata_valid(caldata)) {
+			pr_err("no calibration data found\n");
+			return;
+		}
+	}
+
+	ath79_parse_ascii_mac(caldata + DIR825B1_MAC0_OFFSET, mac0);
+	ath79_parse_ascii_mac(caldata + DIR825B1_MAC1_OFFSET, mac1);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 0);
+	ath79_init_mac(wmac0, mac0, 0);
+	ath79_init_mac(wmac1, mac1, 1);
+
+	ap9x_pci_setup_wmac_led_pin(0, 5);
+	ap9x_pci_setup_wmac_led_pin(1, 5);
+
+	ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, wmac0,
+		      caldata + DIR825B1_CAL1_OFFSET, wmac1);
+}
+
+static void __init dir825b1_setup(void)
+{
+	dir825b1_wlan_init();
+
+	ath79_register_mdio(0, 0x0);
+
+	ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_pll_data.pll_1000 = 0x11110000;
+
+	ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth1_data.phy_mask = 0x10;
+	ath79_eth1_pll_data.pll_1000 = 0x11110000;
+
+	ath79_register_eth(0);
+	ath79_register_eth(1);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
+				 dir825b1_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(dir825b1_gpio_keys),
+					dir825b1_gpio_keys);
+
+	ath79_register_usb();
+
+	platform_device_register(&dir825b1_rtl8366s_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
+	     dir825b1_setup);