Initial commit

target/linux/ath25/base-files/etc/board.d/01_leds

@@ -0,0 +1,13 @@
+#!/bin/sh
+# Copyright 2012-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0"
+
+board_config_flush
+
+exit 0

target/linux/ath25/base-files/etc/board.d/02_network

@@ -0,0 +1,28 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
+     -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \
+   [ -x /sbin/swconfig ];
+then
+	ucidef_add_switch "eth0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+
+elif [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+       -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ];
+then
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+
+elif [ -d /sys/class/net/eth1 ]; then
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+
+else
+	ucidef_set_interface_lan "eth0"
+fi
+
+board_config_flush
+
+exit 0

target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# reset button only supported on ar5315+ at the moment
+preinit_ip() {
+	if [ -z "$pi_ifname" ]; then
+		grep -q 'Atheros AR231[567]' /proc/cpuinfo && {
+			if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+			     -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+				vconfig set_name_type DEV_PLUS_VID_NO_PAD
+				ifconfig eth0 up
+				vconfig add eth0 1
+				ifname=eth0.1
+			else
+				ifname=eth0
+			fi
+			pi_ifname=$ifname
+		}
+	fi
+	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+		ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+	}
+}
+
+
+# reset button only supported on ar5315+ at the moment
+
+preinit_ip_deconfig() {
+	if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+	     -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+		vconfig rem eth0.1 2>/dev/null
+		ifconfig $pi_ifname down
+	elif [ -n "$pi_ifname" ]; then
+		ifconfig $pi_ifname 0.0.0.0
+	fi
+}

target/linux/ath25/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,76 @@
+CI_BLKSZ=65536
+CI_LDADR=0x80041000
+
+platform_find_partitions() {
+	local first dev size erasesize name
+	while read dev size erasesize name; do
+		name=${name#'"'}; name=${name%'"'}
+		case "$name" in
+			vmlinux.bin.l7|kernel|linux|rootfs)
+				if [ -z "$first" ]; then
+					first="$name"
+				else
+					echo "$erasesize:$first:$name"
+					break
+				fi
+			;;
+		esac
+	done < /proc/mtd
+}
+
+platform_find_kernelpart() {
+	local part
+	for part in "${1%:*}" "${1#*:}"; do
+		case "$part" in
+			vmlinux.bin.l7|kernel|linux)
+				echo "$part"
+				break
+			;;
+		esac
+	done
+}
+
+platform_check_image() {
+	[ "$#" -gt 1 ] && return 1
+
+	case "$(get_magic_word "$1")" in
+		# Combined Image
+		4349)
+			local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
+			local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
+
+			if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
+				return 0
+			else
+				echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
+				return 1
+			fi
+		;;
+		*)
+			echo "Invalid image. Use combined .img files on this platform"
+			return 1
+		;;
+	esac
+}
+
+platform_do_upgrade() {
+	local partitions=$(platform_find_partitions)
+	local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
+	local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
+	local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
+	local kern_blocks=$(($kern_length / $CI_BLKSZ))
+	local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
+
+	if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
+	   [ ${kern_blocks:-0} -gt 0 ] && \
+	   [ ${root_blocks:-0} -gt ${kern_blocks:-0} ] && \
+	   [ ${erase_size:-0} -gt 0 ];
+	then
+		local append=""
+		[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+
+		( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
+		  dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
+			mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
+	fi
+}