Initial commit

target/linux/brcm2708/base-files/etc/board.d/02_network

@@ -0,0 +1,30 @@
+#!/bin/sh
+# Copyright (C) 2014-2016 OpenWrt.org
+# Copyright (C) 2017 LEDE project
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+raspberrypi,model-b |\
+raspberrypi,model-b-plus |\
+raspberrypi,model-b-rev2 |\
+raspberrypi,2-model-b |\
+raspberrypi,3-model-b |\
+raspberrypi,3-model-b-plus)
+	ucidef_set_interface_lan "eth0"
+	;;
+
+raspberrypi,model-zero-w)
+	ucidef_set_interface_lan "wlan0"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/brcm2708/base-files/etc/diag.sh

@@ -0,0 +1,35 @@
+#!/bin/sh
+# Copyright (C) 2015-2016 OpenWrt.org
+# Copyright (C) 2017 LEDE project
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+set_state() {
+	case "$(board_name)" in
+	raspberrypi,2-model-b |\
+	raspberrypi,model-b-plus)
+		status_led="led1"
+		;;
+	raspberrypi,model-b |\
+	raspberrypi,model-zero |\
+	raspberrypi,model-zero-w)
+		status_led="led0"
+		;;
+	esac
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}

target/linux/brcm2708/base-files/etc/inittab

@@ -0,0 +1,4 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+::askconsole:/usr/libexec/login.sh
+tty1::askfirst:/usr/libexec/login.sh

target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt

@@ -0,0 +1,66 @@
+# NVRAM file for BCM943430WLPTH
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0727
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0727
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=84
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+papdvalidtest=1
+pacalidx2g=42
+papdepsoffset=-22
+papdendidx=58
+
+# LTECX flags
+ltecxmux=0
+ltecxpadnum=0x0102
+ltecxfnsel=0x44
+ltecxgcigpio=0x01
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3 
+
+edonthd20l=-75
+edoffthd20ul=-80

target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708

@@ -0,0 +1,20 @@
+#!/bin/sh
+# Copyright (C) 2015-2016 OpenWrt.org
+# Copyright (C) 2017 LEDE project
+
+set_preinit_iface() {
+	. /lib/functions.sh
+
+	case "$(board_name)" in
+	raspberrypi,2-model-b |\
+	raspberrypi,3-model-b |\
+	raspberrypi,3-model-b-plus |\
+	raspberrypi,model-b |\
+	raspberrypi,model-b-plus |\
+	raspberrypi,model-b-rev2)
+		ifname=eth0
+		;;
+	esac
+}
+
+boot_hook_add preinit_main set_preinit_iface

target/linux/brcm2708/base-files/lib/preinit/79_move_config

@@ -0,0 +1,18 @@
+#!/bin/sh
+# Copyright (C) 2015 OpenWrt.org
+
+BOOTPART=/dev/mmcblk0p1
+
+move_config() {
+	if [ -b $BOOTPART ]; then
+		insmod nls_cp437
+		insmod nls_iso8859-1
+		insmod fat
+		insmod vfat
+		mkdir -p /boot
+		mount -t vfat -o rw,noatime $BOOTPART /boot
+		[ -f /boot/sysupgrade.tgz ] && mv -f /boot/sysupgrade.tgz /
+	fi
+}
+
+boot_hook_add preinit_mount_root move_config

target/linux/brcm2708/base-files/lib/upgrade/keep.d/platform

@@ -0,0 +1 @@
+/boot/config.txt

target/linux/brcm2708/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,104 @@
+. /lib/functions.sh
+
+REQUIRE_IMAGE_METADATA=1
+
+# copied from x86's platform.sh
+
+platform_check_image() {
+	local diskdev partdev diff
+
+	[ "$#" -gt 1 ] && return 1
+
+	export_bootdevice && export_partdevice diskdev -2 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	get_partitions "/dev/$diskdev" bootdisk
+
+	#extract the boot sector from the image
+	get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b 2>/dev/null
+
+	get_partitions /tmp/image.bs image
+
+	#compare tables
+	diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+
+	rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
+
+	if [ -n "$diff" ]; then
+		echo "Partition layout has changed. Full image will be written."
+		ask_bool 0 "Abort" && exit 1
+		return 0
+	fi
+
+	return 0;
+}
+
+platform_do_upgrade() {
+	local diskdev partdev diff
+
+	export_bootdevice && export_partdevice diskdev -2 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	sync
+
+	if [ "$SAVE_PARTITIONS" = "1" ]; then
+		get_partitions "/dev/$diskdev" bootdisk
+
+		#extract the boot sector from the image
+		get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b
+
+		get_partitions /tmp/image.bs image
+
+		#compare tables
+		diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+	else
+		diff=1
+	fi
+
+	if [ -n "$diff" ]; then
+		get_image "$@" | dd of="/dev/$diskdev" bs=2M conv=fsync
+
+		# Separate removal and addtion is necessary; otherwise, partition 1
+		# will be missing if it overlaps with the old partition 2
+		partx -d - "/dev/$diskdev"
+		partx -a - "/dev/$diskdev"
+
+		return 0
+	fi
+
+	#iterate over each partition from the image and write it to the boot disk
+	while read part start size; do
+		# root is /dev/sd[a|b]2 and not /dev/sd[a|b] this causes some problem
+		# one of which is this offset, I'm not sure what's the best fix, so
+		# here's a WA.
+		let part=$((part - 2))
+		if export_partdevice partdev $part; then
+			echo "Writing image to /dev/$partdev..."
+			get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
+		else
+			echo "Unable to find partition $part device, skipped."
+	fi
+	done < /tmp/partmap.image
+
+	#copy partition uuid
+	echo "Writing new UUID to /dev/$diskdev..."
+	get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
+}
+
+platform_copy_config() {
+	local partdev
+
+	# Same as above /dev/sd[a|b]2 is root, so /boot is -1
+	if export_partdevice partdev -1; then
+		mkdir -p /boot
+		[ -f /boot/kernel.img ] || mount -t vfat -o rw,noatime "/dev/$partdev" /boot
+		cp -af "$CONF_TAR" /boot/
+		tar --directory / -xvf "$CONF_TAR" boot/config.txt
+		sync
+		unmount /boot
+	fi
+}