Initial commit

target/linux/generic/files/include/linux/ar8216_platform.h

@@ -0,0 +1,133 @@
+/*
+ * AR8216 switch driver platform data
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AR8216_PLATFORM_H
+#define AR8216_PLATFORM_H
+
+enum ar8327_pad_mode {
+	AR8327_PAD_NC = 0,
+	AR8327_PAD_MAC2MAC_MII,
+	AR8327_PAD_MAC2MAC_GMII,
+	AR8327_PAD_MAC_SGMII,
+	AR8327_PAD_MAC2PHY_MII,
+	AR8327_PAD_MAC2PHY_GMII,
+	AR8327_PAD_MAC_RGMII,
+	AR8327_PAD_PHY_GMII,
+	AR8327_PAD_PHY_RGMII,
+	AR8327_PAD_PHY_MII,
+};
+
+enum ar8327_clk_delay_sel {
+	AR8327_CLK_DELAY_SEL0 = 0,
+	AR8327_CLK_DELAY_SEL1,
+	AR8327_CLK_DELAY_SEL2,
+	AR8327_CLK_DELAY_SEL3,
+};
+
+struct ar8327_pad_cfg {
+	enum ar8327_pad_mode mode;
+	bool rxclk_sel;
+	bool txclk_sel;
+	bool pipe_rxclk_sel;
+	bool txclk_delay_en;
+	bool rxclk_delay_en;
+	bool sgmii_delay_en;
+	enum ar8327_clk_delay_sel txclk_delay_sel;
+	enum ar8327_clk_delay_sel rxclk_delay_sel;
+	bool mac06_exchange_dis;
+};
+
+enum ar8327_port_speed {
+	AR8327_PORT_SPEED_10 = 0,
+	AR8327_PORT_SPEED_100,
+	AR8327_PORT_SPEED_1000,
+};
+
+struct ar8327_port_cfg {
+	int force_link:1;
+	enum ar8327_port_speed speed;
+	int txpause:1;
+	int rxpause:1;
+	int duplex:1;
+};
+
+struct ar8327_sgmii_cfg {
+	u32 sgmii_ctrl;
+	bool serdes_aen;
+};
+
+struct ar8327_led_cfg {
+	u32 led_ctrl0;
+	u32 led_ctrl1;
+	u32 led_ctrl2;
+	u32 led_ctrl3;
+	bool open_drain;
+};
+
+enum ar8327_led_num {
+	AR8327_LED_PHY0_0 = 0,
+	AR8327_LED_PHY0_1,
+	AR8327_LED_PHY0_2,
+	AR8327_LED_PHY1_0,
+	AR8327_LED_PHY1_1,
+	AR8327_LED_PHY1_2,
+	AR8327_LED_PHY2_0,
+	AR8327_LED_PHY2_1,
+	AR8327_LED_PHY2_2,
+	AR8327_LED_PHY3_0,
+	AR8327_LED_PHY3_1,
+	AR8327_LED_PHY3_2,
+	AR8327_LED_PHY4_0,
+	AR8327_LED_PHY4_1,
+	AR8327_LED_PHY4_2,
+};
+
+enum ar8327_led_mode {
+	AR8327_LED_MODE_HW = 0,
+	AR8327_LED_MODE_SW,
+};
+
+struct ar8327_led_info {
+	const char *name;
+	const char *default_trigger;
+	bool active_low;
+	enum ar8327_led_num led_num;
+	enum ar8327_led_mode mode;
+};
+
+#define AR8327_LED_INFO(_led, _mode, _name) {	\
+	.name = (_name), 	   		\
+	.led_num = AR8327_LED_ ## _led,		\
+	.mode = AR8327_LED_MODE_ ## _mode 	\
+}
+
+struct ar8327_platform_data {
+	struct ar8327_pad_cfg *pad0_cfg;
+	struct ar8327_pad_cfg *pad5_cfg;
+	struct ar8327_pad_cfg *pad6_cfg;
+	struct ar8327_sgmii_cfg *sgmii_cfg;
+	struct ar8327_port_cfg port0_cfg;
+	struct ar8327_port_cfg port6_cfg;
+	struct ar8327_led_cfg *led_cfg;
+
+	int (*get_port_link)(unsigned port);
+
+	unsigned num_leds;
+	const struct ar8327_led_info *leds;
+};
+
+#endif /* AR8216_PLATFORM_H */
+

target/linux/generic/files/include/linux/ath5k_platform.h

@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (c) 2010 Daniel Golle <daniel.golle@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_ATH5K_PLATFORM_H
+#define _LINUX_ATH5K_PLATFORM_H
+
+#define ATH5K_PLAT_EEP_MAX_WORDS	2048
+
+struct ath5k_platform_data {
+	u16 *eeprom_data;
+	u8 *macaddr;
+};
+
+#endif /* _LINUX_ATH5K_PLATFORM_H */

target/linux/generic/files/include/linux/ath9k_platform.h

@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_ATH9K_PLATFORM_H
+#define _LINUX_ATH9K_PLATFORM_H
+
+#define ATH9K_PLAT_EEP_MAX_WORDS	2048
+
+struct ath9k_platform_data {
+	const char *eeprom_name;
+
+	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+	u8 *macaddr;
+
+	int led_pin;
+	u32 gpio_mask;
+	u32 gpio_val;
+
+	u32 bt_active_pin;
+	u32 bt_priority_pin;
+	u32 wlan_active_pin;
+
+	bool endian_check;
+	bool is_clk_25mhz;
+	bool tx_gain_buffalo;
+	bool disable_2ghz;
+	bool disable_5ghz;
+	bool led_active_high;
+
+	int (*get_mac_revision)(void);
+	int (*external_reset)(void);
+
+	bool use_eeprom;
+
+	int num_leds;
+	const struct gpio_led *leds;
+
+	unsigned num_btns;
+	const struct gpio_keys_button *btns;
+	unsigned btn_poll_interval;
+
+	bool ubnt_hsr;
+};
+
+#endif /* _LINUX_ATH9K_PLATFORM_H */

target/linux/generic/files/include/linux/myloader.h

@@ -0,0 +1,121 @@
+/*
+ *  Compex's MyLoader specific definitions
+ *
+ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_SYS_PARAMS	0x20021107
+#define MYLO_MAGIC_PARTITIONS	0x20021103
+#define MYLO_MAGIC_BOARD_PARAMS	0x20021103
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX		0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G	0x0078
+#define DEVID_COMPEX_NP28G	0x044C
+#define DEVID_COMPEX_NP28GHS	0x044E
+#define DEVID_COMPEX_WP54Gv1C	0x0514
+#define DEVID_COMPEX_WP54G	0x0515
+#define DEVID_COMPEX_WP54AG	0x0546
+#define DEVID_COMPEX_WPP54AG	0x0550
+#define DEVID_COMPEX_WPP54G	0x0555
+
+/* Devices based on the Atheros AR2317 */
+#define DEVID_COMPEX_NP25G	0x05E6
+#define DEVID_COMPEX_WPE53G	0x05DC
+
+/* Devices based on the Atheros AR71xx */
+#define DEVID_COMPEX_WP543	0x0640
+#define DEVID_COMPEX_WPE72	0x0672
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18	0x047E
+#define DEVID_COMPEX_NP18A	0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M	0x03E8
+#define DEVID_COMPEX_NP26G16M	0x03E9
+
+struct mylo_partition {
+	uint16_t	flags;	/* partition flags */
+	uint16_t	type;	/* type of the partition */
+	uint32_t	addr;	/* relative address of the partition from the
+				   flash start */
+	uint32_t	size;	/* size of the partition in bytes */
+	uint32_t	param;	/* if this is the active partition, the
+				   MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
+					* MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
+					* before decompression */
+#define PARTITION_FLAG_LZMA	0x0100 /* partition data compressed by LZMA */
+#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE	0
+#define PARTITION_TYPE_USED	1
+
+#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
+					   partition table */
+
+struct mylo_partition_table {
+	uint32_t	magic;		/* must be MYLO_MAGIC_PARTITIONS */
+	uint32_t	res0;		/* unknown/unused */
+	uint32_t	res1;		/* unknown/unused */
+	uint32_t 	res2;		/* unknown/unused */
+	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+	uint32_t	len;		/* length of the partition data */
+	uint32_t	crc;		/* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+	uint32_t	magic;		/* must be MYLO_MAGIC_SYS_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	mylo_ver;
+	uint16_t	vid;		/* Vendor ID */
+	uint16_t	did;		/* Device ID */
+	uint16_t	svid;		/* Sub Vendor ID */
+	uint16_t	sdid;		/* Sub Device ID */
+	uint32_t	rev;		/* device revision */
+	uint32_t	fwhi;
+	uint32_t	fwlo;
+	uint32_t	tftp_addr;
+	uint32_t	prog_start;
+	uint32_t	flash_size;	/* size of boot FLASH in bytes */
+	uint32_t	dram_size;	/* size of onboard RAM in bytes */
+};
+
+struct mylo_eth_addr {
+	uint8_t	mac[6];
+	uint8_t	csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
+					   in the board parameters */
+
+struct mylo_board_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	res2;
+	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+#endif /* _MYLOADER_H_*/

target/linux/generic/files/include/linux/platform_data/adm6996-gpio.h

@@ -0,0 +1,29 @@
+/*
+ * ADM6996 GPIO platform data
+ *
+ * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+
+#ifndef __PLATFORM_ADM6996_GPIO_H
+#define __PLATFORM_ADM6996_GPIO_H
+
+#include <linux/kernel.h>
+
+enum adm6996_model {
+	ADM6996FC = 1,
+	ADM6996M = 2,
+	ADM6996L = 3,
+};
+
+struct adm6996_gpio_platform_data {
+	u8 eecs;
+	u8 eesk;
+	u8 eedi;
+	enum adm6996_model model;
+};
+
+#endif

target/linux/generic/files/include/linux/platform_data/b53.h

@@ -0,0 +1,36 @@
+/*
+ * B53 platform data
+ *
+ * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_H
+#define __B53_H
+
+#include <linux/kernel.h>
+
+struct b53_platform_data {
+	u32 chip_id;
+	u16 enabled_ports;
+
+	/* allow to specify an ethX alias */
+	const char *alias;
+
+	/* only used by MMAP'd driver */
+	unsigned big_endian:1;
+	void __iomem *regs;
+};
+
+#endif

target/linux/generic/files/include/linux/routerboot.h

@@ -0,0 +1,106 @@
+/*
+ *  Mikrotik's RouterBOOT definitions
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ROUTERBOOT_H
+#define _ROUTERBOOT_H
+
+#define RB_MAC_SIZE		6
+
+/*
+ * Magic numbers
+ */
+#define RB_MAGIC_HARD	0x64726148 /* "Hard" */
+#define RB_MAGIC_SOFT	0x74666F53 /* "Soft" */
+#define RB_MAGIC_DAWN	0x6E776144 /* "Dawn" */
+
+#define RB_ID_TERMINATOR	0
+
+/*
+ * ID values for Hardware settings
+ */
+#define RB_ID_HARD_01		1
+#define RB_ID_HARD_02		2
+#define RB_ID_FLASH_INFO	3
+#define RB_ID_MAC_ADDRESS_PACK	4
+#define RB_ID_BOARD_NAME	5
+#define RB_ID_BIOS_VERSION	6
+#define RB_ID_HARD_07		7
+#define RB_ID_SDRAM_TIMINGS	8
+#define RB_ID_DEVICE_TIMINGS	9
+#define RB_ID_SOFTWARE_ID	10
+#define RB_ID_SERIAL_NUMBER	11
+#define RB_ID_HARD_12		12
+#define RB_ID_MEMORY_SIZE	13
+#define RB_ID_MAC_ADDRESS_COUNT	14
+#define RB_ID_HW_OPTIONS	21
+#define RB_ID_WLAN_DATA		22
+
+/*
+ * ID values for Software settings
+ */
+#define RB_ID_UART_SPEED	1
+#define RB_ID_BOOT_DELAY	2
+#define RB_ID_BOOT_DEVICE	3
+#define RB_ID_BOOT_KEY		4
+#define RB_ID_CPU_MODE		5
+#define RB_ID_FW_VERSION	6
+#define RB_ID_SOFT_07		7
+#define RB_ID_SOFT_08		8
+#define RB_ID_BOOT_PROTOCOL	9
+#define RB_ID_SOFT_10		10
+#define RB_ID_SOFT_11		11
+
+/*
+ * UART_SPEED values
+ */
+#define RB_UART_SPEED_115200	0
+#define RB_UART_SPEED_57600	1
+#define RB_UART_SPEED_38400	2
+#define RB_UART_SPEED_19200	3
+#define RB_UART_SPEED_9600	4
+#define RB_UART_SPEED_4800	5
+#define RB_UART_SPEED_2400	6
+#define RB_UART_SPEED_1200	7
+
+/*
+ * BOOT_DELAY values
+ */
+#define RB_BOOT_DELAY_0SEC	0
+#define RB_BOOT_DELAY_1SEC	1
+#define RB_BOOT_DELAY_2SEC	2
+
+/*
+ * BOOT_DEVICE values
+ */
+#define RB_BOOT_DEVICE_ETHER	0
+#define RB_BOOT_DEVICE_NANDETH	1
+#define RB_BOOT_DEVICE_ETHONCE	2
+#define RB_BOOT_DEVICE_NANDONLY	3
+
+/*
+ * BOOT_KEY values
+ */
+#define RB_BOOT_KEY_ANY		0
+#define RB_BOOT_KEY_DEL		1
+
+/*
+ * CPU_MODE values
+ */
+#define RB_CPU_MODE_POWERSAVE	0
+#define RB_CPU_MODE_REGULAR	1
+
+/*
+ * BOOT_PROTOCOL values
+ */
+#define RB_BOOT_PROTOCOL_BOOTP	0
+#define RB_BOOT_PROTOCOL_DHCP	1
+
+#endif /* _ROUTERBOOT_H */

target/linux/generic/files/include/linux/rt2x00_platform.h

@@ -0,0 +1,23 @@
+/*
+ * Platform data definition for the rt2x00 driver
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _RT2X00_PLATFORM_H
+#define _RT2X00_PLATFORM_H
+
+struct rt2x00_platform_data {
+	char *eeprom_file_name;
+	const u8 *mac_address;
+
+	int disable_2ghz;
+	int disable_5ghz;
+};
+
+#endif /* _RT2X00_PLATFORM_H */

target/linux/generic/files/include/linux/rtl8366.h

@@ -0,0 +1,40 @@
+/*
+ * Platform data definition for the Realtek RTL8366RB/S ethernet switch driver
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366_H
+#define _RTL8366_H
+
+#define RTL8366_DRIVER_NAME	"rtl8366"
+#define RTL8366S_DRIVER_NAME	"rtl8366s"
+#define RTL8366RB_DRIVER_NAME	"rtl8366rb"
+
+enum rtl8366_type {
+	RTL8366_TYPE_UNKNOWN,
+	RTL8366_TYPE_S,
+	RTL8366_TYPE_RB,
+};
+
+struct rtl8366_initval {
+	unsigned	reg;
+	u16		val;
+};
+
+struct rtl8366_platform_data {
+	unsigned	gpio_sda;
+	unsigned	gpio_sck;
+	void		(*hw_reset)(bool active);
+
+	unsigned	num_initvals;
+	struct rtl8366_initval *initvals;
+};
+
+enum rtl8366_type rtl8366_smi_detect(struct rtl8366_platform_data *pdata);
+
+#endif /*  _RTL8366_H */

target/linux/generic/files/include/linux/rtl8367.h

@@ -0,0 +1,60 @@
+/*
+ * Platform data definition for the Realtek RTL8367 ethernet switch driver
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8367_H
+#define _RTL8367_H
+
+#define RTL8367_DRIVER_NAME	"rtl8367"
+#define RTL8367B_DRIVER_NAME	"rtl8367b"
+
+enum rtl8367_port_speed {
+	RTL8367_PORT_SPEED_10 = 0,
+	RTL8367_PORT_SPEED_100,
+	RTL8367_PORT_SPEED_1000,
+};
+
+struct rtl8367_port_ability {
+	int force_mode;
+	int nway;
+	int txpause;
+	int rxpause;
+	int link;
+	int duplex;
+	enum rtl8367_port_speed speed;
+};
+
+enum rtl8367_extif_mode {
+	RTL8367_EXTIF_MODE_DISABLED = 0,
+	RTL8367_EXTIF_MODE_RGMII,
+	RTL8367_EXTIF_MODE_MII_MAC,
+	RTL8367_EXTIF_MODE_MII_PHY,
+	RTL8367_EXTIF_MODE_TMII_MAC,
+	RTL8367_EXTIF_MODE_TMII_PHY,
+	RTL8367_EXTIF_MODE_GMII,
+	RTL8367_EXTIF_MODE_RGMII_33V,
+};
+
+struct rtl8367_extif_config {
+	unsigned int txdelay;
+	unsigned int rxdelay;
+	enum rtl8367_extif_mode mode;
+	struct rtl8367_port_ability ability;
+};
+
+struct rtl8367_platform_data {
+	unsigned gpio_sda;
+	unsigned gpio_sck;
+	void (*hw_reset)(bool active);
+
+	struct rtl8367_extif_config *extif0_cfg;
+	struct rtl8367_extif_config *extif1_cfg;
+};
+
+#endif /*  _RTL8367_H */

target/linux/generic/files/include/linux/switch.h

@@ -0,0 +1,179 @@
+/*
+ * switch.h: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@nbd.name>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _LINUX_SWITCH_H
+#define _LINUX_SWITCH_H
+
+#include <net/genetlink.h>
+#include <uapi/linux/switch.h>
+
+struct switch_dev;
+struct switch_op;
+struct switch_val;
+struct switch_attr;
+struct switch_attrlist;
+struct switch_led_trigger;
+
+int register_switch(struct switch_dev *dev, struct net_device *netdev);
+void unregister_switch(struct switch_dev *dev);
+
+/**
+ * struct switch_attrlist - attribute list
+ *
+ * @n_attr: number of attributes
+ * @attr: pointer to the attributes array
+ */
+struct switch_attrlist {
+	int n_attr;
+	const struct switch_attr *attr;
+};
+
+enum switch_port_speed {
+	SWITCH_PORT_SPEED_UNKNOWN = 0,
+	SWITCH_PORT_SPEED_10 = 10,
+	SWITCH_PORT_SPEED_100 = 100,
+	SWITCH_PORT_SPEED_1000 = 1000,
+};
+
+struct switch_port_link {
+	bool link;
+	bool duplex;
+	bool aneg;
+	bool tx_flow;
+	bool rx_flow;
+	enum switch_port_speed speed;
+	/* in ethtool adv_t format */
+	u32 eee;
+};
+
+struct switch_port_stats {
+	unsigned long long tx_bytes;
+	unsigned long long rx_bytes;
+};
+
+/**
+ * struct switch_dev_ops - switch driver operations
+ *
+ * @attr_global: global switch attribute list
+ * @attr_port: port attribute list
+ * @attr_vlan: vlan attribute list
+ *
+ * Callbacks:
+ *
+ * @get_vlan_ports: read the port list of a VLAN
+ * @set_vlan_ports: set the port list of a VLAN
+ *
+ * @get_port_pvid: get the primary VLAN ID of a port
+ * @set_port_pvid: set the primary VLAN ID of a port
+ *
+ * @apply_config: apply all changed settings to the switch
+ * @reset_switch: resetting the switch
+ */
+struct switch_dev_ops {
+	struct switch_attrlist attr_global, attr_port, attr_vlan;
+
+	int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+	int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+
+	int (*get_port_pvid)(struct switch_dev *dev, int port, int *val);
+	int (*set_port_pvid)(struct switch_dev *dev, int port, int val);
+
+	int (*apply_config)(struct switch_dev *dev);
+	int (*reset_switch)(struct switch_dev *dev);
+
+	int (*get_port_link)(struct switch_dev *dev, int port,
+			     struct switch_port_link *link);
+	int (*set_port_link)(struct switch_dev *dev, int port,
+			     struct switch_port_link *link);
+	int (*get_port_stats)(struct switch_dev *dev, int port,
+			      struct switch_port_stats *stats);
+
+	int (*phy_read16)(struct switch_dev *dev, int addr, u8 reg, u16 *value);
+	int (*phy_write16)(struct switch_dev *dev, int addr, u8 reg, u16 value);
+};
+
+struct switch_dev {
+	struct device_node *of_node;
+	const struct switch_dev_ops *ops;
+	/* will be automatically filled */
+	char devname[IFNAMSIZ];
+
+	const char *name;
+	/* NB: either alias or netdev must be set */
+	const char *alias;
+	struct net_device *netdev;
+
+	unsigned int ports;
+	unsigned int vlans;
+	unsigned int cpu_port;
+
+	/* the following fields are internal for swconfig */
+	unsigned int id;
+	struct list_head dev_list;
+	unsigned long def_global, def_port, def_vlan;
+
+	struct mutex sw_mutex;
+	struct switch_port *portbuf;
+	struct switch_portmap *portmap;
+	struct switch_port_link linkbuf;
+
+	char buf[128];
+
+#ifdef CONFIG_SWCONFIG_LEDS
+	struct switch_led_trigger *led_trigger;
+#endif
+};
+
+struct switch_port {
+	u32 id;
+	u32 flags;
+};
+
+struct switch_portmap {
+	u32 virt;
+	const char *s;
+};
+
+struct switch_val {
+	const struct switch_attr *attr;
+	unsigned int port_vlan;
+	unsigned int len;
+	union {
+		const char *s;
+		u32 i;
+		struct switch_port *ports;
+		struct switch_port_link *link;
+	} value;
+};
+
+struct switch_attr {
+	int disabled;
+	int type;
+	const char *name;
+	const char *description;
+
+	int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+	int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+
+	/* for driver internal use */
+	int id;
+	int ofs;
+	int max;
+};
+
+int switch_generic_set_link(struct switch_dev *dev, int port,
+			    struct switch_port_link *link);
+
+#endif /* _LINUX_SWITCH_H */

target/linux/generic/files/include/uapi/linux/switch.h

@@ -0,0 +1,119 @@
+/*
+ * switch.h: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@nbd.name>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _UAPI_LINUX_SWITCH_H
+#define _UAPI_LINUX_SWITCH_H
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/genetlink.h>
+#ifndef __KERNEL__
+#include <netlink/netlink.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/ctrl.h>
+#endif
+
+/* main attributes */
+enum {
+	SWITCH_ATTR_UNSPEC,
+	/* global */
+	SWITCH_ATTR_TYPE,
+	/* device */
+	SWITCH_ATTR_ID,
+	SWITCH_ATTR_DEV_NAME,
+	SWITCH_ATTR_ALIAS,
+	SWITCH_ATTR_NAME,
+	SWITCH_ATTR_VLANS,
+	SWITCH_ATTR_PORTS,
+	SWITCH_ATTR_PORTMAP,
+	SWITCH_ATTR_CPU_PORT,
+	/* attributes */
+	SWITCH_ATTR_OP_ID,
+	SWITCH_ATTR_OP_TYPE,
+	SWITCH_ATTR_OP_NAME,
+	SWITCH_ATTR_OP_PORT,
+	SWITCH_ATTR_OP_VLAN,
+	SWITCH_ATTR_OP_VALUE_INT,
+	SWITCH_ATTR_OP_VALUE_STR,
+	SWITCH_ATTR_OP_VALUE_PORTS,
+	SWITCH_ATTR_OP_VALUE_LINK,
+	SWITCH_ATTR_OP_DESCRIPTION,
+	/* port lists */
+	SWITCH_ATTR_PORT,
+	SWITCH_ATTR_MAX
+};
+
+enum {
+	/* port map */
+	SWITCH_PORTMAP_PORTS,
+	SWITCH_PORTMAP_SEGMENT,
+	SWITCH_PORTMAP_VIRT,
+	SWITCH_PORTMAP_MAX
+};
+
+/* commands */
+enum {
+	SWITCH_CMD_UNSPEC,
+	SWITCH_CMD_GET_SWITCH,
+	SWITCH_CMD_NEW_ATTR,
+	SWITCH_CMD_LIST_GLOBAL,
+	SWITCH_CMD_GET_GLOBAL,
+	SWITCH_CMD_SET_GLOBAL,
+	SWITCH_CMD_LIST_PORT,
+	SWITCH_CMD_GET_PORT,
+	SWITCH_CMD_SET_PORT,
+	SWITCH_CMD_LIST_VLAN,
+	SWITCH_CMD_GET_VLAN,
+	SWITCH_CMD_SET_VLAN
+};
+
+/* data types */
+enum switch_val_type {
+	SWITCH_TYPE_UNSPEC,
+	SWITCH_TYPE_INT,
+	SWITCH_TYPE_STRING,
+	SWITCH_TYPE_PORTS,
+	SWITCH_TYPE_LINK,
+	SWITCH_TYPE_NOVAL,
+};
+
+/* port nested attributes */
+enum {
+	SWITCH_PORT_UNSPEC,
+	SWITCH_PORT_ID,
+	SWITCH_PORT_FLAG_TAGGED,
+	SWITCH_PORT_ATTR_MAX
+};
+
+/* link nested attributes */
+enum {
+	SWITCH_LINK_UNSPEC,
+	SWITCH_LINK_FLAG_LINK,
+	SWITCH_LINK_FLAG_DUPLEX,
+	SWITCH_LINK_FLAG_ANEG,
+	SWITCH_LINK_FLAG_TX_FLOW,
+	SWITCH_LINK_FLAG_RX_FLOW,
+	SWITCH_LINK_SPEED,
+	SWITCH_LINK_FLAG_EEE_100BASET,
+	SWITCH_LINK_FLAG_EEE_1000BASET,
+	SWITCH_LINK_ATTR_MAX,
+};
+
+#define SWITCH_ATTR_DEFAULTS_OFFSET	0x1000
+
+
+#endif /* _UAPI_LINUX_SWITCH_H */