Initial commit

target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi

@@ -0,0 +1,177 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
+	compatible = "qcom,ipq4019";
+
+	soc {
+		pinctrl@1000000 {
+			serial_0_pins: serial_pinmux {
+				mux {
+					pins = "gpio16", "gpio17";
+					function = "blsp_uart0";
+					bias-disable;
+				};
+			};
+
+			serial_1_pins: serial1_pinmux {
+				mux {
+					pins = "gpio8", "gpio9";
+					function = "blsp_uart1";
+					bias-disable;
+				};
+			};
+
+			spi_0_pins: spi_0_pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+				};
+				pinconf {
+					pins = "gpio13", "gpio14", "gpio15";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				pinconf_cs {
+					pins = "gpio12";
+					drive-strength = <2>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			i2c_0_pins: i2c_0_pinmux {
+				pinmux {
+					function = "blsp_i2c0";
+					pins = "gpio10", "gpio11";
+				};
+				pinconf {
+					pins = "gpio10", "gpio11";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			nand_pins: nand_pins {
+
+				pullups {
+					pins = "gpio52", "gpio53", "gpio58",
+						"gpio59";
+					function = "qpic";
+					bias-pull-up;
+				};
+
+				pulldowns {
+					pins = "gpio54", "gpio55", "gpio56",
+						"gpio57", "gpio60", "gpio61",
+						"gpio62", "gpio63", "gpio64",
+						"gpio65", "gpio66", "gpio67",
+						"gpio68", "gpio69";
+					function = "qpic";
+					bias-pull-down;
+				};
+			};
+		};
+
+		blsp_dma: dma@7884000 {
+			status = "okay";
+		};
+
+		spi_0: spi@78b5000 {
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+			mx25l25635e@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "mx25l25635e";
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+
+			status = "okay";
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		usb3_ss_phy: ssphy@9a000 {
+			status = "okay";
+		};
+
+		usb3_hs_phy: hsphy@a6000 {
+			status = "okay";
+		};
+
+		usb3: usb3@8af8800 {
+			status = "okay";
+		};
+
+		usb2_hs_phy: hsphy@a8000 {
+			status = "okay";
+		};
+
+		usb2: usb2@60f8800 {
+			status = "okay";
+		};
+
+		cryptobam: dma@8e04000 {
+			status = "okay";
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		qpic_bam: dma@7984000 {
+			status = "okay";
+		};
+
+		nand: qpic-nand@79b0000 {
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+};