Initial commit

target/linux/lantiq/base-files/etc/board.d/01_leds

@@ -0,0 +1,84 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+# based on ar71xx
+#
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+led_wifi="$(get_dt_led wifi)"
+[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
+
+led_usb="$(get_dt_led usb)"
+[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
+
+led_usb2="$(get_dt_led usb2)"
+[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
+
+led_dsl="$(get_dt_led dsl)"
+[ -n "$led_dsl" ] && {
+	led_internet="$(get_dt_led internet)"
+	if [ -n "$led_internet" ]; then
+		ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
+		ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
+	else
+		ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
+	fi
+}
+
+board=$(board_name)
+
+case "$board" in
+allnet,all0333cj)
+	ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
+	;;
+arcadyan,arv4525pw)
+	ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
+	;;
+arcadyan,arv7506pw11)
+	ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
+	;;
+arcadyan,arv7519rw22)
+	ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
+	;;
+arcadyan,arv752dpw22)
+	ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
+	;;
+bt,homehub-v5a)
+	ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
+	;;
+netgear,dm200)
+	ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
+	;;
+avm,fritz7320)
+	ucidef_set_led_netdev "wifi" "wifi" "fritz7320:green:wlan" "wlan0"
+	;;
+zyxel,p-2812hnu-f1|\
+zyxel,p-2812hnu-f3)
+	ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
+	;;
+arcadyan,vgv7510kw22-nor|\
+arcadyan,vgv7510kw22-brn)
+	ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio"
+	;;
+arcadyan,vgv7519-nor|\
+arcadyan,vgv7519-brn)
+	ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio"
+	;;
+buffalo,wbmr-300hpd)
+	ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
+	ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "wan" "WAN" "wbmr300:green:wan" "switch0" "0x10"
+	ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20"
+	ucidef_set_led_default "router" "router" "wbmr300:green:router" "1"
+	;;
+*)
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/lantiq/base-files/etc/board.d/02_network

@@ -0,0 +1,248 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+
+board_config_update
+
+vpi=1
+vci=32
+annex="a"
+tone="av"
+xfer_mode=""
+encaps="llc"
+payload="bridged"
+lan_mac=""
+wan_mac=""
+interface_wan="dsl0"
+
+board=$(board_name)
+
+case "$board" in
+audiocodes,mp-252)
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+	;;
+
+allnet,all0333cj)
+	annex="b"
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+arcadyan,arv4510pw)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
+	;;
+
+arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw)
+	ucidef_add_switch "switch0" \
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+	;;
+
+arcadyan,arv4520pw)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
+	;;
+
+arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw)
+	annex="b"
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+arcadyan,arv7506pw11)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+	;;
+
+arcadyan,arv7519pw)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
+	;;
+
+arcadyan,arv7519rw22)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
+	;;
+
+arcadyan,arv752dpw22|arcadyan,arv8539pw22)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+	;;
+
+alphanetworks,asl56026)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
+	ucidef_add_switch "switch0"\
+		"2:lan" "3:lan" "6t@eth0"
+	;;
+
+bt,homehub-v2b)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
+	;;
+
+bt,homehub-v3a)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+bt,homehub-v5a)
+	lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
+	;;
+
+netgear,dgn1000b)
+	annex="b"
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+netgear,dgn3500|netgear,dgn3500b)
+	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
+	;;
+
+netgear,dm200)
+	lan_mac=$(mtd_get_mac_binary ART 0)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+lantiq,easy80920-nand|lantiq,easy80920-nor)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
+	;;
+
+avm,fritz3370)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+avm,fritz7320)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+avm,fritz7360sl)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
+	;;
+
+siemens,gigaset-sx76x)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+	;;
+
+zte,h201l)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
+	;;
+
+zyxel,p-2601hn)
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
+	;;
+
+zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
+	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
+	;;
+
+tplink,tdw8970|tplink,tdw8980)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
+	;;
+
+arcadyan,vg3503j)
+	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"2:lan:2" "4:lan:1" "6t@eth0"
+	;;
+
+tplink,vr200v)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
+	;;
+
+arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
+	ucidef_add_switch "switch0" \
+		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
+	;;
+
+arcadyan,vgv7519-nor|arcadyan,vgv7519-brn)
+	wan_mac=$(mtd_get_mac_binary board_config 22)
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
+	;;
+
+buffalo,wbmr-hp-g300h)
+	ucidef_add_switch "switch0" \
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+	;;
+
+buffalo,wbmr-300hpd)
+	lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
+	wan_mac="$lan_mac"
+	ucidef_add_switch "switch0" \
+		"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
+	;;
+
+*)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
+esac
+
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
+	ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl"
+
+if lantiq_is_vdsl_system; then
+	ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
+else
+	ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
+fi
+
+ucidef_set_interface_wan "$interface_wan" "pppoe"
+
+[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+
+board_config_flush
+
+exit 0
+

target/linux/lantiq/base-files/etc/diag.sh

@@ -0,0 +1,37 @@
+#!/bin/sh
+# Copyright (C) 2010-2015 OpenWrt.org
+
+. /lib/functions/leds.sh
+
+boot="$(get_dt_led boot)"
+failsafe="$(get_dt_led failsafe)"
+running="$(get_dt_led running)"
+
+set_state() {
+	status_led="$boot"
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_off
+		[ -n "$running" ] && {
+			status_led="$running"
+			status_led_off
+		}
+		status_led="$failsafe"
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		status_led_off
+		[ -n "$running" ] && {
+			status_led="$running"
+			status_led_on
+		}
+		;;
+	esac
+}

target/linux/lantiq/base-files/etc/hotplug.d/dsl/led_dsl.sh

@@ -0,0 +1,30 @@
+#!/bin/sh
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+led_dsl_up() {
+	case "$(config_get led_dsl trigger)" in
+	"netdev")
+		led_set_attr $1 "trigger" "netdev"
+		led_set_attr $1 "device_name" "$(config_get led_dsl dev)"
+		led_set_attr $1 "mode" "$(config_get led_dsl mode)"
+		;;
+	*)
+		led_on $1
+		;;
+	esac
+}
+
+config_load system
+config_get led led_dsl sysfs
+if [ -n "$led" ]; then
+	case "$DSL_INTERFACE_STATUS" in
+	  "HANDSHAKE")  led_timer $led 500 500;;
+	  "TRAINING")   led_timer $led 200 200;;
+	  "UP")		led_dsl_up $led;;
+	  *)		led_off $led
+	esac
+fi

target/linux/lantiq/base-files/etc/hotplug.d/dsl/pppoa.sh

@@ -0,0 +1,37 @@
+#!/bin/sh
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+
+include /lib/network
+scan_interfaces
+
+interfaces=`ubus list network.interface.\* | cut -d"." -f3`
+for ifc in $interfaces; do
+
+	json_load "$(ifstatus $ifc)"
+
+	json_get_var proto proto
+	if [ "$proto" != "pppoa" ]; then
+		continue
+	fi
+
+	json_get_var up up
+	config_get_bool auto "$ifc" auto 1
+	if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then
+		if [ "$up" != 1 ] && [ "$auto" = 1 ]; then
+			( sleep 1; ifup "$ifc" ) &
+		fi
+	else
+		if [ "$up" = 1 ] && [ "$auto" = 1 ]; then
+			( sleep 1; ifdown "$ifc" ) &
+		else
+			json_get_var autostart autostart
+			if [ "$up" != 1 ] && [ "$autostart" = 1 ]; then
+				( sleep 1; ifdown "$ifc" ) &
+			fi
+		fi
+	fi
+done

target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -0,0 +1,50 @@
+#!/bin/sh
+# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+. /lib/upgrade/nand.sh
+
+ath10k_caldata_die() {
+	echo "ath10k caldata: " "$*"
+	exit 1
+}
+
+ath10k_caldata_extract_ubi() {
+	local part=$1
+	local offset=$2
+	local count=$3
+	local ubidev=$(nand_find_ubi $CI_UBIPART)
+	local ubi
+
+	ubi=$(nand_find_volume $ubidev $part)
+	[ -n "$ubi" ] || \
+		ath10k_caldata_die "no UBI volume found for $part"
+
+	dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+		ath10k_caldata_die "failed to extract from $ubi"
+}
+
+ath10k_caldata_set_macaddr() {
+	local macaddr=$1
+
+	macaddr_2bin $macaddr | dd of=/lib/firmware/$FIRMWARE \
+				conv=notrunc bs=1 seek=6 count=6
+}
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:02:00.0.bin")
+	board=$(board_name)
+	case $board in
+		bt,homehub-v5a)
+			ath10k_caldata_extract_ubi "caldata" 20480 2116
+			ath10k_caldata_set_macaddr $(macaddr_add $(mtd_get_mac_binary_ubi caldata 4364) +3)
+			;;
+		*)
+			ath10k_caldata_die "board $board is not supported yet"
+			;;
+	esac
+	;;
+esac

target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom

@@ -0,0 +1,152 @@
+#!/bin/sh
+# Based on ar71xx 10-ath9k-eeprom
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+. /lib/upgrade/nand.sh
+
+# xor multiple hex values of the same length
+xor() {
+	local val
+	local ret="0x$1"
+	local retlen=${#1}
+
+	shift
+	while [ -n "$1" ]; do
+		val="0x$1"
+		ret=$((ret ^ val))
+		shift
+	done
+
+	printf "%0${retlen}x" "$ret"
+}
+
+ath9k_eeprom_die() {
+	echo "ath9k eeprom: $*"
+	exit 1
+}
+
+ath9k_eeprom_extract_raw() {
+	local source=$1
+	local offset=$2
+	local swap=$3
+	local size=4096
+	local bs=1
+	local conv=
+
+	if [ $swap -gt 0 ]; then
+		bs=2
+		conv="conv=swab"
+		size=$((size / bs))
+		offset=$((offset / bs))
+	fi
+
+	dd if=$source of=/lib/firmware/$FIRMWARE bs=$bs skip=$offset count=$size $conv 2>/dev/null || \
+			ath9k_eeprom_die "failed to extract from $mtd"
+}
+
+ath9k_eeprom_extract() {
+	local part=$1
+	local offset=$2
+	local swap=$3
+	local mtd
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || \
+		ath9k_eeprom_die "no mtd device found for partition $part"
+
+	ath9k_eeprom_extract_raw $mtd $offset $swap
+}
+
+ath9k_ubi_eeprom_extract() {
+	local part=$1
+	local offset=$2
+	local swap=$3
+	local ubidev=$(nand_find_ubi $CI_UBIPART)
+	local ubi
+
+	ubi=$(nand_find_volume $ubidev $part)
+	[ -n "$ubi" ] || \
+		ath9k_eeprom_die "no UBI volume found for $part"
+
+	ath9k_eeprom_extract_raw /dev/$ubi $offset $swap
+}
+
+ath9k_patch_fw_mac_crc() {
+	local mac=$1
+	local mac_offset=$2
+	local chksum_offset=$((mac_offset - 10))
+
+	ath9k_patch_fw_mac "${mac}" "${mac_offset}" "${chksum_offset}"
+}
+
+ath9k_patch_fw_mac() {
+	local mac=$1
+	local mac_offset=$2
+	local chksum_offset=$3
+	local xor_mac
+	local xor_fw_mac
+	local xor_fw_chksum
+
+	[ -z "$mac" -o -z "$mac_offset" ] && return
+
+	[ -n "$chksum_offset" ] && {
+		xor_mac=${mac//:/}
+		xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+
+		xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+		xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
+
+		xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+		xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+
+		printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+			dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
+	}
+
+	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6
+}
+
+case "$FIRMWARE" in
+	"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
+	"ath9k-eeprom-pci-0000:01:00.0.bin" | \
+	"ath9k-eeprom-pci-0000:02:00.0.bin")
+		board=$(board_name)
+
+		case "$board" in
+			arcadyan,arv7518pw)
+				ath9k_eeprom_extract "boardconfig" 1024 1
+				;;
+			arcadyan,arv8539pw22)
+				ath9k_eeprom_extract "art" 1024 1
+				;;
+			bt,homehub-v2b)
+				ath9k_eeprom_extract "art" 0 1
+				ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 524
+				;;
+			bt,homehub-v3a)
+				ath9k_eeprom_extract "art-copy" 0 1
+				ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 268
+				;;
+			bt,homehub-v5a)
+				ath9k_ubi_eeprom_extract "caldata" 4096 0
+				ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 4364) +2) 268
+				;;
+			netgear,dgn3500|netgear,dgn3500b)
+				ath9k_eeprom_extract "calibration" 61440 0
+				ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524
+				;;
+			avm,fritz3370|avm,fritz7320|avm,fritz7360sl)
+				ath9k_eeprom_extract "urlader" 2437 0
+				;;
+			tplink,tdw8970|tplink,tdw8980)
+				ath9k_eeprom_extract "boardconfig" 135168 0
+				;;
+			*)
+				ath9k_eeprom_die "board $board is not supported yet"
+				;;
+		esac
+		;;
+esac

target/linux/lantiq/base-files/etc/inittab

@@ -0,0 +1,3 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyLTQ0::askfirst:/usr/libexec/login.sh

target/linux/lantiq/base-files/etc/uci-defaults/01_led_migration

@@ -0,0 +1,82 @@
+#!/bin/sh
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+
+LED_OPTIONS_CHANGED=0
+
+. /lib/functions.sh
+
+do_led_update_sysfs()
+{
+	local cfg=$1; shift
+	local tuples="$@"
+	local sysfs
+	local name
+
+	config_get sysfs $cfg sysfs
+	config_get name $cfg name
+
+	[ -z "$sysfs" ] && return
+
+	for tuple in $tuples; do
+		local old=${tuple%=*}
+		local new=${tuple#*=}
+		local new_sysfs
+
+		new_sysfs=$(echo ${sysfs} | sed "s/${old}/${new}/")
+
+		[ "$new_sysfs" = "$sysfs" ] && continue
+
+		uci set system.${cfg}.sysfs="${new_sysfs}"
+		LED_OPTIONS_CHANGED=1
+
+		logger -t led-migration "sysfs option of LED \"${name}\" updated to ${new_sysfs}"
+	done;
+}
+
+do_internet_led_rename()
+{
+	config_load system
+
+	[ -n $(config_get led_internet name) ] || return
+	[ -z $(config_get led_dsl name) ] || return
+
+	uci rename system.led_internet=led_dsl
+	uci set system.led_dsl.name=dsl
+
+	LED_OPTIONS_CHANGED=1
+	logger -t led-migration "internet led renamed to dsl"
+}
+
+migrate_leds()
+{
+	config_load system
+	config_foreach do_led_update_sysfs led "$@"
+}
+
+case "$(board_name)" in
+arcadyan,arv452cqw|\
+arcadyan,arv7510pw22|\
+arcadyan,arv7519rw22|\
+arcadyan,arv752dpw|\
+arcadyan,arv752dpw22|\
+alphanetworks,asl56026|\
+bt,homehub-v2b|\
+bt,homehub-v3a|\
+bt,homehub-v5a|\
+avm,fritz7360sl|\
+arcadyan,vg3503j)
+	do_internet_led_rename
+	;;
+netgear,dgn3500|\
+netgear,dgn3500b)
+	migrate_leds "dgn3500:blue:wireless=dgn3500:green:wireless"
+	;;
+*)
+	;;
+esac
+
+[ "$LED_OPTIONS_CHANGED" = "1" ] && uci commit system
+
+exit 0

target/linux/lantiq/base-files/etc/uci-defaults/02_migrate_xdsl_iface

@@ -0,0 +1,67 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/lantiq.sh
+
+IFNAME_CHANGED=0
+
+rename_xdsl_ifname()
+{
+	local cfg="$1"
+	local section="$2"
+	local option="$3"
+	local name
+
+	config_get name ${section} $option
+	case $name in
+		nas0*)
+			name=${name/nas0/dsl0}
+			;;
+		ptm0*)
+			name=${name/ptm0/dsl0}
+			;;
+		*)
+			return
+			;;
+	esac
+
+	uci set ${cfg}.${section}.$option=$name
+	IFNAME_CHANGED=1
+}
+
+add_atm_bridge_nameprefix()
+{
+	local cfg="$1"
+
+	config_get nameprefix "$cfg" nameprefix
+	[ -z "$nameprefix" ] || return
+
+	uci set network.${cfg}.nameprefix="dsl"
+	IFNAME_CHANGED=1
+}
+
+migrate_network_xdsl_ifname()
+{
+	rename_xdsl_ifname network "$1" ifname
+	rename_xdsl_ifname network "$1" name
+}
+
+migrate_led_xdsl_ifname()
+{
+	rename_xdsl_ifname system "$1" dev
+}
+
+config_load network
+config_foreach migrate_network_xdsl_ifname
+config_foreach add_atm_bridge_nameprefix atm-bridge
+
+[ "$IFNAME_CHANGED" = "1" ] && uci commit network
+
+IFNAME_CHANGED=0
+
+config_load system
+config_foreach migrate_led_xdsl_ifname led
+
+[ "$IFNAME_CHANGED" = "1" ] && uci commit system
+
+exit 0

target/linux/lantiq/base-files/lib/functions/lantiq.sh

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+lantiq_is_vdsl_system() {
+	grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo
+}

target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh

@@ -0,0 +1,747 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2012-2014 OpenWrt.org
+
+if [ "$( which vdsl_cpe_control )" ]; then
+	XDSL_CTRL=vdsl_cpe_control
+else
+	XDSL_CTRL=dsl_cpe_control
+fi
+
+#
+# Basic functions to send CLI commands to the vdsl_cpe_control daemon
+#
+dsl_cmd() {
+	killall -q -0 ${XDSL_CTRL} && (
+		lock /var/lock/dsl_pipe
+		echo "$@" > /tmp/pipe/dsl_cpe0_cmd
+		cat /tmp/pipe/dsl_cpe0_ack
+		lock -u /var/lock/dsl_pipe
+	)
+}
+dsl_val() {
+	echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
+}
+dsl_string() {
+	echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
+}
+
+#
+# Simple divide by 10 routine to cope with one decimal place
+#
+dbt() {
+	local a=$(expr $1 / 10)
+	local b=$(expr $1 % 10)
+	echo "${a}.${b#-}"
+}
+#
+# Take a number and convert to k or meg
+#
+scale() {
+	local val=$1
+	local a
+	local b
+
+	if [ "$val" -gt 1000000 ]; then
+		a=$(expr $val / 1000)
+		b=$(expr $a % 1000)
+		a=$(expr $a / 1000)
+		printf "%d.%03d Mb" ${a} ${b}
+	elif [ "$val" -gt 1000 ]; then
+		a=$(expr $val / 1000)
+		printf "%d Kb" ${a}
+	else
+		echo "${val} b"
+	fi
+}
+
+scale_latency() {
+	local val=$1
+	local a
+	local b
+
+	a=$(expr $val / 100)
+	b=$(expr $val % 100)
+	printf "%d.%d ms" ${a} ${b}
+}
+
+#
+# convert vendorid into human readable form
+#
+parse_vendorid() {
+	local val=$1
+	local name
+	local version
+
+	case "$val" in
+		B5,00,41,4C,43,42*)
+			name="Alcatel"
+			version=${val##*B5,00,41,4C,43,42,}
+			;;
+		B5,00,41,4E,44,56*)
+			name="Analog Devices"
+			version=${val##*B5,00,41,4E,44,56,}
+			;;
+		B5,00,42,44,43,4D*)
+			name="Broadcom"
+			version=${val##*B5,00,42,44,43,4D,}
+			;;
+		B5,00,43,45,4E,54*)
+			name="Centillium"
+			version=${val##*B5,00,43,45,4E,54,}
+			;;
+		B5,00,47,53,50,4E*)
+			name="Globespan"
+			version=${val##*B5,00,47,53,50,4E,}
+			;;
+		B5,00,49,4B,4E,53*)
+			name="Ikanos"
+			version=${val##*B5,00,49,4B,4E,53,}
+			;;
+		B5,00,49,46,54,4E*)
+			name="Infineon"
+			version=${val##*B5,00,49,46,54,4E,}
+			;;
+		B5,00,54,53,54,43*)
+			name="Texas Instruments"
+			version=${val##*B5,00,54,53,54,43,}
+			;;
+		B5,00,54,4D,4D,42*)
+			name="Thomson MultiMedia Broadband"
+			version=${val##*B5,00,54,4D,4D,42,}
+			;;
+		B5,00,54,43,54,4E*)
+			name="Trend Chip Technologies"
+			version=${val##*B5,00,54,43,54,4E,}
+			;;
+		B5,00,53,54,4D,49*)
+			name="ST Micro"
+			version=${val##*B5,00,53,54,4D,49,}
+			;;
+	esac
+
+	[ -n "$name" ] && {
+		val="$name"
+
+		[ "$version" != "00,00" ] && val="$(printf "%s %d.%d" "$val" 0x${version//,/ 0x})"
+	}
+
+	echo "$val"
+}
+
+#
+# Read the data rates for both directions
+#
+data_rates() {
+	local csg
+	local dru
+	local drd
+	local sdru
+	local sdrd
+
+	csg=$(dsl_cmd g997csg 0 1)
+	drd=$(dsl_val "$csg" ActualDataRate)
+
+	csg=$(dsl_cmd g997csg 0 0)
+	dru=$(dsl_val "$csg" ActualDataRate)
+
+	[ -z "$drd" ] && drd=0
+	[ -z "$dru" ] && dru=0
+
+	sdrd=$(scale $drd)
+	sdru=$(scale $dru)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.data_rate_down=$drd"
+		echo "dsl.data_rate_up=$dru"
+		echo "dsl.data_rate_down_s=\"$sdrd\""
+		echo "dsl.data_rate_up_s=\"$sdru\""
+	else
+		echo "Data Rate:                                Down: ${sdrd}/s / Up: ${sdru}/s"
+	fi
+}
+
+#
+# Chipset
+#
+chipset() {
+	local vig
+	local cs
+
+	vig=$(dsl_cmd vig)
+	cs=$(dsl_val "$vig" DSL_ChipSetType)
+	csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
+	csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.chipset=\"${cs}\""
+		echo "dsl.firmware_version=\"${csfw}\""
+		echo "dsl.api_version=\"${csapi}\""
+	else
+		echo "Chipset:                                  ${cs}"
+		echo "Firmware Version:                         ${csfw}"
+		echo "API Version:                              ${csapi}"
+	fi
+}
+
+#
+# Vendor information
+#
+vendor() {
+	local lig
+	local vid
+	local svid
+
+	lig=$(dsl_cmd g997lig 1)
+	vid=$(dsl_string "$lig" G994VendorID)
+	svid=$(dsl_string "$lig" SystemVendorID)
+
+	vid=$(parse_vendorid $vid)
+	svid=$(parse_vendorid $svid)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.atuc_vendor_id=\"${vid}\""
+		echo "dsl.atuc_system_vendor_id=\"${svid}\""
+	else
+		echo "ATU-C Vendor ID:                          ${vid}"
+		echo "ATU-C System Vendor ID:                   ${svid}"
+	fi
+}
+
+#
+# XTSE capabilities
+#
+xtse() {
+	local xtusesg
+	local xtse1
+	local xtse2
+	local xtse3
+	local xtse4
+	local xtse5
+	local xtse6
+	local xtse7
+	local xtse8
+
+	local xtse_s=""
+
+	local annex_s=""
+	local line_mode_s=""
+	local vector_s=""
+
+	local dsmsg=""
+	local cmd=""
+
+	xtusesg=$(dsl_cmd g997xtusesg)
+	xtse1=$(dsl_val "$xtusesg" XTSE1)
+	xtse2=$(dsl_val "$xtusesg" XTSE2)
+	xtse3=$(dsl_val "$xtusesg" XTSE3)
+	xtse4=$(dsl_val "$xtusesg" XTSE4)
+	xtse5=$(dsl_val "$xtusesg" XTSE5)
+	xtse6=$(dsl_val "$xtusesg" XTSE6)
+	xtse7=$(dsl_val "$xtusesg" XTSE7)
+	xtse8=$(dsl_val "$xtusesg" XTSE8)
+
+	# Evaluate Annex (according to G.997.1, 7.3.1.1.1)
+	if [ $((xtse1 & 13)) != 0 \
+	-o $((xtse2 & 1)) != 0 \
+	-o $((xtse3 & 12)) != 0 \
+	-o $((xtse4 & 3)) != 0 \
+	-o $((xtse6 & 3)) != 0 \
+	-o $((xtse8 & 1)) != 0 ]; then
+		annex_s=" A,"
+	fi
+
+	if [ $((xtse1 & 48)) != 0 \
+	-o $((xtse2 & 2)) != 0 \
+	-o $((xtse3 & 48)) != 0 \
+	-o $((xtse6 & 12)) != 0 \
+	-o $((xtse8 & 2)) != 0 ]; then
+		annex_s="$annex_s B,"
+	fi
+
+	if [ $((xtse1 & 194)) != 0 \
+	-o $((xtse2 & 12)) != 0 \
+	-o $((xtse8 & 4)) != 0 ]; then
+		annex_s="$annex_s C,"
+	fi
+
+	if [ $((xtse4 & 48)) != 0 \
+	-o $((xtse5 & 3)) != 0 \
+	-o $((xtse6 & 192)) != 0 ]; then
+		annex_s="$annex_s I,"
+	fi
+
+	if [ $((xtse4 & 192)) != 0 \
+	-o $((xtse7 & 3)) != 0 ]; then
+		annex_s="$annex_s J,"
+	fi
+
+	if [ $((xtse5 & 60)) != 0 ]; then
+		annex_s="$annex_s L,"
+	fi
+
+	if [ $((xtse5 & 192)) != 0 \
+	-o $((xtse7 & 12)) != 0 ]; then
+		annex_s="$annex_s M,"
+	fi
+
+	annex_s=`echo ${annex_s:1}`
+	annex_s=`echo ${annex_s%?}`
+
+	# Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
+
+	# Regional standard: ANSI T1.413
+	if [ $((xtse1 & 1)) != 0  ]; then
+		line_mode_s=" T1.413,"
+	fi
+
+	# Regional standard: TS 101 388
+	if [ $((xtse1 & 1)) != 0  ]; then
+		line_mode_s="$line_mode_s TS 101 388,"
+	fi
+
+	if [ $((xtse1 & 252)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.1 (ADSL),"
+	fi
+
+	if [ $((xtse2 & 15)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
+	fi
+
+	if [ $((xtse3 & 60)) != 0 \
+	-o $((xtse4 & 240)) != 0 \
+	-o $((xtse5 & 252)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.3 (ADSL2),"
+	fi
+
+	if [ $((xtse4 & 3)) != 0 \
+	-o $((xtse5 & 3)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
+	fi
+
+	if [ $((xtse6 & 199)) != 0 \
+	-o $((xtse7 & 15)) != 0  ]; then
+		line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
+	fi
+
+	if [ $((xtse8 & 7)) != 0  ]; then
+		dsmsg=$(dsl_cmd dsmsg)
+		vector_s=$(dsl_val "$dsmsg" eVectorStatus)
+
+		case "$vector_s" in
+			"0")	line_mode_s="$line_mode_s G.993.2 (VDSL2)," ;;
+			"1")	line_mode_s="$line_mode_s G.993.5 (VDSL2 with downstream vectoring)," ;;
+			"2")	line_mode_s="$line_mode_s G.993.5 (VDSL2 with down- and upstream vectoring)," ;;
+			*)	line_mode_s="$line_mode_s unknown," ;;
+		esac
+	fi
+
+	#!!! PROPRIETARY & INTERMEDIATE USE !!!
+	if [ $((xtse8 & 128)) != 0  ]; then
+		line_mode_s="$line_mode_s G.993.1 (VDSL),"
+	fi
+
+	line_mode_s=`echo ${line_mode_s:1}`
+	line_mode_s=`echo ${line_mode_s%?}`
+
+	xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}"
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.xtse1=${xtse1:-nil}"
+		echo "dsl.xtse2=${xtse2:-nil}"
+		echo "dsl.xtse3=${xtse3:-nil}"
+		echo "dsl.xtse4=${xtse4:-nil}"
+		echo "dsl.xtse5=${xtse5:-nil}"
+		echo "dsl.xtse6=${xtse6:-nil}"
+		echo "dsl.xtse7=${xtse7:-nil}"
+		echo "dsl.xtse8=${xtse8:-nil}"
+		echo "dsl.xtse_s=\"$xtse_s\""
+		echo "dsl.annex_s=\"${annex_s}\""
+		echo "dsl.line_mode_s=\"${line_mode_s}\""
+	else
+		echo "XTSE Capabilities:                        ${xtse_s}"
+		echo "Annex:                                    ${annex_s}"
+		echo "Line Mode:                                ${line_mode_s}"
+	fi
+}
+
+#
+# Power Management Mode
+#
+power_mode() {
+	local pmsg=$(dsl_cmd g997pmsg)
+	local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
+	local s;
+
+	case "$pm" in
+		"-1")		s="Power management state is not available" ;;
+		"0")		s="L0 - Synchronized" ;;
+		"1")		s="L1 - Power Down Data transmission (G.992.2)" ;;
+		"2")		s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;;
+		"3")		s="L3 - No power" ;;
+		*)		s="unknown" ;;
+	esac
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.power_mode_num=${pm:-nil}"
+		echo "dsl.power_mode_s=\"$s\""
+	else
+		echo "Power Management Mode:                    $s"
+	fi
+}
+
+#
+# Latency type (interleave delay)
+#
+latency_delay() {
+	local csg
+
+	local idu
+	local idu_s;
+	local sidu
+
+	local idd
+	local idd_s;
+	local sidd
+
+	csg=$(dsl_cmd g997csg 0 1)
+	idd=$(dsl_val "$csg" ActualInterleaveDelay)
+
+	csg=$(dsl_cmd g997csg 0 0)
+	idu=$(dsl_val "$csg" ActualInterleaveDelay)
+
+	[ -z "$idd" ] && idd=0
+	[ -z "$idu" ] && idu=0
+
+	if [ "$idd" -gt 100 ]; then
+		idd_s="Interleave"
+	else
+		idd_s="Fast"
+	fi
+
+	if [ "$idu" -gt 100 ]; then
+		idu_s="Interleave"
+	else
+		idu_s="Fast"
+	fi
+
+	sidu=$(scale_latency $idu)
+	sidd=$(scale_latency $idd)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.latency_num_down=\"$sidd\""
+		echo "dsl.latency_num_up=\"$sidu\""
+		echo "dsl.latency_s_down=\"$idd_s\""
+		echo "dsl.latency_s_up=\"$idu_s\""
+	else
+		echo "Latency [Interleave Delay]:               ${sidd} [${idd_s}]   ${sidu} [${idu_s}]"
+	fi
+}
+
+#
+# Errors
+#
+errors() {
+	local lsctg
+	local dpctg
+	local ccsg
+	local esf
+	local esn
+	local sesf
+	local sesn
+	local lossf
+	local lossn
+	local uasf
+	local uasn
+
+	local crc_pf
+	local crc_pn
+	local crcp_pf
+	local crcp_pn
+	local hecf
+	local hecn
+
+	local fecn
+	local fecf
+
+	lsctg=$(dsl_cmd pmlsctg 1)
+	esf=$(dsl_val "$lsctg" nES)
+	sesf=$(dsl_val "$lsctg" nSES)
+	lossf=$(dsl_val "$lsctg" nLOSS)
+	uasf=$(dsl_val "$lsctg" nUAS)
+
+	lsctg=$(dsl_cmd pmlsctg 0)
+	esn=$(dsl_val "$lsctg" nES)
+	sesn=$(dsl_val "$lsctg" nSES)
+	lossn=$(dsl_val "$lsctg" nLOSS)
+	uasn=$(dsl_val "$lsctg" nUAS)
+
+	dpctg=$(dsl_cmd pmdpctg 0 1)
+	hecf=$(dsl_val "$dpctg" nHEC)
+	crc_pf=$(dsl_val "$dpctg" nCRC_P)
+	crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
+
+	dpctg=$(dsl_cmd pmdpctg 0 0)
+	hecn=$(dsl_val "$dpctg" nHEC)
+	crc_pn=$(dsl_val "$dpctg" nCRC_P)
+	crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
+
+	ccsg=$(dsl_cmd pmccsg 0 1 0)
+	fecf=$(dsl_val "$ccsg" nFEC)
+
+	ccsg=$(dsl_cmd pmccsg 0 0 0)
+	fecn=$(dsl_val "$ccsg" nFEC)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.errors_fec_near=${fecn:-nil}"
+		echo "dsl.errors_fec_far=${fecf:-nil}"
+		echo "dsl.errors_es_near=${esn:-nil}"
+		echo "dsl.errors_es_far=${esf:-nil}"
+		echo "dsl.errors_ses_near=${sesn:-nil}"
+		echo "dsl.errors_ses_far=${sesf:-nil}"
+		echo "dsl.errors_loss_near=${lossn:-nil}"
+		echo "dsl.errors_loss_far=${lossf:-nil}"
+		echo "dsl.errors_uas_near=${uasn:-nil}"
+		echo "dsl.errors_uas_far=${uasf:-nil}"
+		echo "dsl.errors_hec_near=${hecn:-nil}"
+		echo "dsl.errors_hec_far=${hecf:-nil}"
+		echo "dsl.errors_crc_p_near=${crc_pn:-nil}"
+		echo "dsl.errors_crc_p_far=${crc_pf:-nil}"
+		echo "dsl.errors_crcp_p_near=${crcp_pn:-nil}"
+		echo "dsl.errors_crcp_p_far=${crcp_pf:-nil}"
+	else
+		echo "Forward Error Correction Seconds (FECS):  Near: ${fecn} / Far: ${fecf}"
+		echo "Errored seconds (ES):                     Near: ${esn} / Far: ${esf}"
+		echo "Severely Errored Seconds (SES):           Near: ${sesn} / Far: ${sesf}"
+		echo "Loss of Signal Seconds (LOSS):            Near: ${lossn} / Far: ${lossf}"
+		echo "Unavailable Seconds (UAS):                Near: ${uasn} / Far: ${uasf}"
+		echo "Header Error Code Errors (HEC):           Near: ${hecn} / Far: ${hecf}"
+		echo "Non Pre-emtive CRC errors (CRC_P):        Near: ${crc_pn} / Far: ${crc_pf}"
+		echo "Pre-emtive CRC errors (CRCP_P):           Near: ${crcp_pn} / Far: ${crcp_pf}"
+	fi
+}
+
+#
+# Work out how long the line has been up
+#
+line_uptime() {
+	local ccsg
+	local et
+	local etr
+	local d
+	local h
+	local m
+	local s
+	local rc=""
+
+	ccsg=$(dsl_cmd pmccsg 0 0 0)
+	et=$(dsl_val "$ccsg" nElapsedTime)
+
+	[ -z "$et" ] && et=0
+
+	d=$(expr $et / 86400)
+	etr=$(expr $et % 86400)
+	h=$(expr $etr / 3600)
+	etr=$(expr $etr % 3600)
+	m=$(expr $etr / 60)
+	s=$(expr $etr % 60)
+
+
+	[ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
+	[ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
+	[ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
+	[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
+
+	[ -z "$rc" ] && rc="down"
+
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.line_uptime=${et}"
+		echo "dsl.line_uptime_s=\"${rc}\""
+	else
+
+		echo "Line Uptime Seconds:                      ${et}"
+		echo "Line Uptime:                              ${rc}"
+	fi
+}
+
+#
+# Get noise and attenuation figures
+#
+line_data() {
+	local lsg
+	local latnu
+	local latnd
+	local satnu
+	local satnd
+	local snru
+	local snrd
+	local attndru
+	local attndrd
+	local sattndru
+	local sattndrd
+	local actatpu
+	local actatpd
+
+	lsg=$(dsl_cmd g997lsg 1 1)
+	latnd=$(dsl_val "$lsg" LATN)
+	satnd=$(dsl_val "$lsg" SATN)
+	snrd=$(dsl_val "$lsg" SNR)
+	attndrd=$(dsl_val "$lsg" ATTNDR)
+	actatpd=$(dsl_val "$lsg" ACTATP)
+
+	lsg=$(dsl_cmd g997lsg 0 1)
+	latnu=$(dsl_val "$lsg" LATN)
+	satnu=$(dsl_val "$lsg" SATN)
+	snru=$(dsl_val "$lsg" SNR)
+	attndru=$(dsl_val "$lsg" ATTNDR)
+	actatpu=$(dsl_val "$lsg" ACTATP)
+
+	[ -z "$latnd" ] && latnd=0
+	[ -z "$latnu" ] && latnu=0
+	[ -z "$satnd" ] && satnd=0
+	[ -z "$satnu" ] && satnu=0
+	[ -z "$snrd" ] && snrd=0
+	[ -z "$snru" ] && snru=0
+	[ -z "$actatpd" ] && actatpd=0
+	[ -z "$actatpu" ] && actatpu=0
+
+	latnd=$(dbt $latnd)
+	latnu=$(dbt $latnu)
+	satnd=$(dbt $satnd)
+	satnu=$(dbt $satnu)
+	snrd=$(dbt $snrd)
+	snru=$(dbt $snru)
+	actatpd=$(dbt $actatpd)
+	actatpu=$(dbt $actatpu)
+
+	[ -z "$attndrd" ] && attndrd=0
+	[ -z "$attndru" ] && attndru=0
+
+	sattndrd=$(scale $attndrd)
+	sattndru=$(scale $attndru)
+	
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.line_attenuation_down=\"$latnd\""
+		echo "dsl.line_attenuation_up=\"$latnu\""
+		echo "dsl.noise_margin_down=\"$snrd\""
+		echo "dsl.noise_margin_up=\"$snru\""
+		echo "dsl.signal_attenuation_down=\"$satnd\""
+		echo "dsl.signal_attenuation_up=\"$satnu\""
+		echo "dsl.actatp_down=\"$actatpd\""
+		echo "dsl.actatp_up=\"$actatpu\""
+		echo "dsl.max_data_rate_down=$attndrd"
+		echo "dsl.max_data_rate_up=$attndru"
+		echo "dsl.max_data_rate_down_s=\"$sattndrd\""
+		echo "dsl.max_data_rate_up_s=\"$sattndru\""
+	else
+		echo "Line Attenuation (LATN):                  Down: ${latnd} dB / Up: ${latnu} dB"
+		echo "Signal Attenuation (SATN):                Down: ${satnd} dB / Up: ${satnu} dB"
+		echo "Noise Margin (SNR):                       Down: ${snrd} dB / Up: ${snru} dB"
+		echo "Aggregate Transmit Power (ACTATP):        Down: ${actatpd} dB / Up: ${actatpu} dB"
+		echo "Max. Attainable Data Rate (ATTNDR):       Down: ${sattndrd}/s / Up: ${sattndru}/s"
+	fi
+}
+
+#
+# Is the line up? Or what state is it in?
+#
+line_state() {
+	local lsg=$(dsl_cmd lsg)
+	local ls=$(dsl_val "$lsg" nLineState);
+	local s;
+
+	case "$ls" in
+		"0x0")		s="not initialized" ;;
+		"0x1")		s="exception" ;;
+		"0x10")		s="not updated" ;;
+		"0xff")		s="idle request" ;;
+		"0x100")	s="idle" ;;
+		"0x1ff")	s="silent request" ;;
+		"0x200")	s="silent" ;;
+		"0x300")	s="handshake" ;;
+		"0x380")	s="full_init" ;;
+		"0x400")	s="discovery" ;;
+		"0x500")	s="training" ;;
+		"0x600")	s="analysis" ;;
+		"0x700")	s="exchange" ;;
+		"0x800")	s="showtime_no_sync" ;;
+		"0x801")	s="showtime_tc_sync" ;;
+		"0x900")	s="fastretrain" ;;
+		"0xa00")	s="lowpower_l2" ;;
+		"0xb00")	s="loopdiagnostic active" ;;
+		"0xb10")	s="loopdiagnostic data exchange" ;;
+		"0xb20")	s="loopdiagnostic data request" ;;
+		"0xc00")	s="loopdiagnostic complete" ;;
+		"0x1000000")	s="test" ;;
+		"0xd00")	s="resync" ;;
+		"0x3c0")	s="short init entry" ;;
+		"")		s="not running daemon"; ls="0xfff" ;;
+		*)		s="unknown" ;;
+	esac
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.line_state_num=$ls"
+		echo "dsl.line_state_detail=\"$s\""
+		if [ "$ls" = "0x801" ]; then
+			echo "dsl.line_state=\"UP\""
+		else
+			echo "dsl.line_state=\"DOWN\""
+		fi
+	else
+		if [ "$ls" = "0x801" ]; then
+			echo "Line State:                               UP [$ls: $s]"
+		else
+			echo "Line State:                               DOWN [$ls: $s]"
+		fi
+	fi
+}
+
+#
+# Which profile is used?
+#
+profile() {
+	local bpstg=$(dsl_cmd bpstg)
+	local profile=$(dsl_val "$bpstg" nProfile);
+	local s;
+
+	case "$profile" in
+		"0")	s="8a" ;;
+		"1")	s="8b" ;;
+		"2")	s="8c" ;;
+		"3")	s="8d" ;;
+		"4")	s="12a" ;;
+		"5")	s="12b" ;;
+		"6")	s="17a" ;;
+		"7")	s="30a" ;;
+		"8")	s="17b" ;;
+		"")		s="";;
+		*)		s="unknown" ;;
+	esac
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.profile=${profile:-nil}"
+		echo "dsl.profile_s=\"${s}\""
+	else
+		echo "Profile:                                  $s"
+	fi
+}
+
+status() {
+	vendor
+	chipset
+	xtse
+	profile
+	line_state
+	errors
+	power_mode
+	latency_delay
+	data_rates
+	line_data
+	line_uptime
+}
+
+lucistat() {
+	echo "local dsl={}"
+	status
+	echo "return dsl"
+}

target/linux/lantiq/base-files/lib/preinit/05_set_preinit_iface_lantiq

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+. /lib/functions/lantiq.sh
+
+set_preinit_iface() {
+	ifname=eth0
+}
+
+boot_hook_add preinit_main set_preinit_iface
+

target/linux/lantiq/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,19 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	bt,homehub-v2b|bt,homehub-v3a|bt,homehub-v5a|zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
+		nand_do_upgrade $1
+		;;
+	*)
+		default_do_upgrade "$ARGV"
+		;;
+	esac
+}

target/linux/lantiq/base-files/sbin/dsl_notify.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# This script is called by dsl_cpe_control whenever there is a DSL event
+# and calls any available hotplug script(s) in /etc/hotplug.d/dsl.
+
+exec /sbin/hotplug-call dsl