Initial commit

target/linux/mxs/Makefile

@@ -0,0 +1,25 @@
+#
+# Copyright (C) 2013-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=mxs
+BOARDNAME:=Freescale i.MX23/i.MX28
+FEATURES:=ext4 rtc usb gpio
+CPU_TYPE:=arm926ej-s
+
+MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
+KERNEL_PATCHVER:=4.14
+KERNELNAME:=zImage dtbs
+
+define Target/Description
+	Support for Freescale i.MX23/i.MX28 boards
+endef
+
+include $(INCLUDE_DIR)/target.mk
+
+$(eval $(call BuildTarget))

target/linux/mxs/base-files/etc/board.d/02_network

@@ -0,0 +1,18 @@
+#!/bin/sh
+# Copyright (C) 2013-2015 OpenWrt.org
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+*)
+	ucidef_set_interface_lan 'eth0'
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/mxs/base-files/etc/diag.sh

@@ -0,0 +1,38 @@
+#!/bin/sh
+# Copyright (C) 2013-2014 OpenWrt.org
+
+. /lib/functions.sh
+. /lib/functions/leds.sh
+
+get_status_led() {
+	case $(board_name) in
+	duckbill)
+		status_led="duckbill:green:status"
+		;;
+	olinuxino)
+		status_led="green"
+		;;
+	*)
+		status_led=$(cd /sys/class/leds && ls -1d *:status 2> /dev/null | head -n 1)
+		;;
+	esac
+}
+
+set_state() {
+	get_status_led
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}

target/linux/mxs/base-files/etc/inittab

@@ -0,0 +1,3 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyAMA0::askfirst:/usr/libexec/login.sh

target/linux/mxs/base-files/lib/mxs.sh

@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+
+MXS_BOARD_NAME=
+MXS_MODEL=
+
+mxs_board_detect() {
+	local machine
+	local name
+
+	machine=$(cat /proc/device-tree/model)
+
+	case "$machine" in
+	*"I2SE Duckbill"*)
+		name="duckbill"
+		;;
+	*"i.MX23 Olinuxino Low Cost Board")
+		name="olinuxino"
+		;;
+	esac
+
+	[ -z "$name" ] && name="unknown"
+
+	[ -z "$MXS_BOARD_NAME" ] && MXS_BOARD_NAME="$name"
+	[ -z "$MXS_MODEL" ] && MXS_MODEL="$machine"
+
+	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
+
+	echo "$MXS_BOARD_NAME" > /tmp/sysinfo/board_name
+	echo "$MXS_MODEL" > /tmp/sysinfo/model
+}

target/linux/mxs/base-files/lib/preinit/01_preinit_do_mxs.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+do_mxs() {
+	. /lib/mxs.sh
+
+	mxs_board_detect
+}
+
+boot_hook_add preinit_main do_mxs

target/linux/mxs/config-4.14

@@ -0,0 +1,313 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_CPU_AUTO=y
+# CONFIG_ARCH_MULTI_V4 is not set
+# CONFIG_ARCH_MULTI_V4T is not set
+CONFIG_ARCH_MULTI_V4_V5=y
+CONFIG_ARCH_MULTI_V5=y
+CONFIG_ARCH_MXS=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_THUMB=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_COMMON_CLK=y
+CONFIG_COREDUMP=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_ARM926T=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC16=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DEV_MXS_DCP=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DEBUG_ALIGN_RODATA=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_UART_8250 is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DTC=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EXT4_FS=y
+CONFIG_EXTCON=y
+CONFIG_FEC=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+# CONFIG_GIANFAR is not set
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_MXS=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCA=y
+CONFIG_I2C_ALGOPCF=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_MXS=y
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_KFIFO_BUF=y
+CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_IIO_TRIGGER=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MXS=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISDN is not set
+CONFIG_JBD2=y
+CONFIG_LIBFDT=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_MXS_LRADC=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_MXS=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MXS_DMA=y
+CONFIG_MXS_TIMER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_MXS_OCOTP=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX23=y
+CONFIG_PINCTRL_IMX28=y
+CONFIG_PINCTRL_MXS=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_RATIONAL=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STMP=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_MXS_AUART=y
+CONFIG_SERIAL_MXS_AUART_CONSOLE=y
+CONFIG_SMSC_PHY=y
+CONFIG_SOC_BUS=y
+CONFIG_SOC_IMX23=y
+CONFIG_SOC_IMX28=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MXS=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SRCU=y
+CONFIG_STMP3XXX_RTC_WATCHDOG=y
+CONFIG_STMP_DEVICE=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_OF=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_OTG=y
+CONFIG_USB_PHY=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFP is not set
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0

target/linux/mxs/image/Config.in

@@ -0,0 +1,8 @@
+config TARGET_BOOTFS_PARTSIZE
+	int "Boot (SD Card) filesystem partition size (in MB)"
+	depends on TARGET_mxs_olinuxino-maxi || TARGET_mxs_olinuxino-micro
+	default 8
+	help
+	    On the Olimex OLinuXino boards, mainline U-Boot loads the
+	    linux kernel and device tree file from a FAT partition.
+	    The default value of 8 MB should be more than adequate.

target/linux/mxs/image/Makefile

@@ -0,0 +1,79 @@
+#
+# Copyright (C) 2013-2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+BOARDS:= \
+	imx23-olinuxino \
+	imx28-duckbill
+
+FAT32_BLOCK_SIZE=1024
+FAT32_BLOCKS=$(shell echo $$(($(CONFIG_TARGET_BOOTFS_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
+
+define Image/BuildKernel
+	mkimage -A arm -O linux -T kernel -C none \
+		-a 0x40008000 -e 0x40008000 \
+		-n 'ARM OpenWrt Linux-$(LINUX_VERSION)' \
+		-d $(KDIR)/zImage $(KDIR)/uImage
+	cp $(KDIR)/uImage $(BIN_DIR)/$(IMG_PREFIX)-uImage
+endef
+
+define Image/InstallKernel
+	mkdir -p $(TARGET_DIR)/boot
+	cp \
+		$(KDIR)/zImage $(KDIR)/uImage \
+		$(foreach board,$(BOARDS),$(DTS_DIR)/$(board).dtb) \
+		$(TARGET_DIR)/boot/
+endef
+
+define Image/Build/SDCard-vfat-ext4
+	rm -f $(KDIR)/boot.img
+	mkfs.fat $(KDIR)/boot.img -C $(FAT32_BLOCKS)
+
+	mcopy -i $(KDIR)/boot.img $(DTS_DIR)/$(3).dtb ::$(3).dtb
+	mcopy -i $(KDIR)/boot.img $(BIN_DIR)/$(IMG_PREFIX)-uImage ::uImage
+
+	./gen_sdcard_vfat_ext4.sh \
+		$(BIN_DIR)/$(2) \
+		$(STAGING_DIR_IMAGE)/$(4)-u-boot.sb \
+		$(KDIR)/boot.img \
+		$(KDIR)/root.$(1) \
+		$(CONFIG_TARGET_BOOTFS_PARTSIZE) \
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE)
+	$(call Image/Gzip,$(BIN_DIR)/$(2))
+endef
+
+define Image/Build/SDCard-ext4-ext4
+	./gen_sdcard_ext4_ext4.sh \
+		$(BIN_DIR)/$(2) \
+		$(STAGING_DIR_IMAGE)/$(4)-u-boot.sb \
+		$(KDIR)/root.$(1) \
+		$(CONFIG_TARGET_ROOTFS_PARTSIZE)
+	$(call Image/Gzip,$(BIN_DIR)/$(2))
+endef
+
+define Image/Build/Profile/olinuxino-maxi
+	$(call Image/Build/SDCard-vfat-ext4,$(1),$(2),imx23-olinuxino,mx23_olinuxino)
+endef
+
+define Image/Build/Profile/olinuxino-micro
+	$(call Image/Build/SDCard-vfat-ext4,$(1),$(2),imx23-olinuxino,mx23_olinuxino)
+endef
+
+define Image/Build/Profile/duckbill
+	$(call Image/Build/SDCard-ext4-ext4,$(1),$(2),imx28-duckbill,duckbill)
+endef
+
+define Image/Build
+	$(call Image/Build/$(1),$(1))
+	$(call Image/Build/Profile/$(PROFILE),$(1),$(IMG_PREFIX)-$(PROFILE)-sdcard.img)
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+	$(call Image/Gzip,$(BIN_DIR)/$(IMG_PREFIX)-root.$(1))
+endef
+
+$(eval $(call BuildImage))

target/linux/mxs/image/gen_sdcard_ext4_ext4.sh

@@ -0,0 +1,33 @@
+#!/usr/bin/env bash
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+set -x
+[ $# -eq 4 ] || {
+    echo "SYNTAX: $0 <file> <u-boot.sb image> <rootfs image> <rootfs size>"
+    exit 1
+}
+
+OUTPUT="$1"
+UBOOT="$2"
+ROOTFS="$3"
+ROOTFSSIZE="$4"
+
+head=4
+sect=63
+
+# set the Boot stream partition size to 1M
+set `ptgen -o $OUTPUT -h $head -s $sect -l 1024 -t 53 -p 1M -t 83 -p ${ROOTFSSIZE}M -t 83 -p ${ROOTFSSIZE}M`
+
+ROOTFS1OFFSET="$(($3 / 512))"
+ROOTFS1SIZE="$(($4 / 512))"
+ROOTFS2OFFSET="$(($5 / 512))"
+ROOTFS2SIZE="$(($6 / 512))"
+
+dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFS1OFFSET" conv=notrunc
+dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFS2OFFSET" conv=notrunc
+sdimage -d "$OUTPUT" -f "$UBOOT"

target/linux/mxs/image/gen_sdcard_vfat_ext4.sh

@@ -0,0 +1,37 @@
+#!/usr/bin/env bash
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+set -x
+[ $# -eq 6 ] || {
+    echo "SYNTAX: $0 <file> <u-boot.sb image> <bootfs image> <rootfs image> <bootfs size> <rootfs size>"
+    exit 1
+}
+
+OUTPUT="$1"
+UBOOT="$2"
+BOOTFS="$3"
+ROOTFS="$4"
+BOOTFSSIZE="$5"
+ROOTFSSIZE="$6"
+
+head=4
+sect=63
+
+# Set the u-boot storage to 2M
+set `ptgen -o $OUTPUT -h $head -s $sect -l 1024 -t 53 -p 2M -t c -p ${BOOTFSSIZE}M -t 83 -p ${ROOTFSSIZE}M`
+
+UBOOTOFFSET="$(($1 / 512))"
+UBOOTSIZE="$(($2 / 512))"
+BOOTOFFSET="$(($3 / 512))"
+BOOTSIZE="$(($4 / 512))"
+ROOTFSOFFSET="$(($5 / 512))"
+ROOTFSSIZE="$(($6 / 512))"
+
+dd bs=512 if="$BOOTFS" of="$OUTPUT" seek="$BOOTOFFSET" conv=notrunc
+dd bs=512 if="$ROOTFS" of="$OUTPUT" seek="$ROOTFSOFFSET" conv=notrunc
+sdimage -d "$OUTPUT" -f "$UBOOT"

target/linux/mxs/patches-4.14/110-crypto-mxsdcp-provide-importexport.patch

@@ -0,0 +1,51 @@
+--- a/drivers/crypto/mxs-dcp.c
++++ b/drivers/crypto/mxs-dcp.c
+@@ -831,6 +831,24 @@ static void dcp_sha_cra_exit(struct cryp
+ {
+ }
+ 
++static int dcp_sha_export(struct ahash_request *req, void *out)
++{
++	struct dcp_sha_req_ctx *rctx = ahash_request_ctx(req);
++
++	memcpy(out, rctx, sizeof(struct dcp_sha_req_ctx));
++
++	return 0;
++}
++
++static int dcp_sha_import(struct ahash_request *req, const void *in)
++{
++	struct dcp_sha_req_ctx *rctx = ahash_request_ctx(req);
++
++	memcpy(rctx, in, sizeof(struct dcp_sha_req_ctx));
++
++	return 0;
++}
++
+ /* AES 128 ECB and AES 128 CBC */
+ static struct crypto_alg dcp_aes_algs[] = {
+ 	{
+@@ -890,8 +908,11 @@ static struct ahash_alg dcp_sha1_alg = {
+ 	.final	= dcp_sha_final,
+ 	.finup	= dcp_sha_finup,
+ 	.digest	= dcp_sha_digest,
++	.import = dcp_sha_import,
++	.export = dcp_sha_export,
+ 	.halg	= {
+ 		.digestsize	= SHA1_DIGEST_SIZE,
++		.statesize	= sizeof(struct dcp_sha_req_ctx),
+ 		.base		= {
+ 			.cra_name		= "sha1",
+ 			.cra_driver_name	= "sha1-dcp",
+@@ -914,8 +935,11 @@ static struct ahash_alg dcp_sha256_alg =
+ 	.final	= dcp_sha_final,
+ 	.finup	= dcp_sha_finup,
+ 	.digest	= dcp_sha_digest,
++	.import = dcp_sha_import,
++	.export = dcp_sha_export,
+ 	.halg	= {
+ 		.digestsize	= SHA256_DIGEST_SIZE,
++		.statesize	= sizeof(struct dcp_sha_req_ctx),
+ 		.base		= {
+ 			.cra_name		= "sha256",
+ 			.cra_driver_name	= "sha256-dcp",

target/linux/mxs/profiles/01-duckbill.mk

@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/duckbill
+  NAME:=I2SE Duckbill boards
+  FEATURES+=usbgadget
+  PACKAGES+= \
+	-dnsmasq -firewall -ppp -ip6tables -iptables -6relayd -mtd uboot-envtools \
+	kmod-leds-gpio kmod-ledtrig-timer -kmod-ipt-nathelper uboot-mxs-duckbill
+endef
+
+define Profile/duckbill/Description
+	I2SE's Duckbill devices
+endef
+
+$(eval $(call Profile,duckbill))

target/linux/mxs/profiles/02-olinuxino-maxi.mk

@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/olinuxino-maxi
+  NAME:=Olimex OLinuXino Maxi/Mini boards
+  PACKAGES += imx-bootlets uboot-mxs-mx23_olinuxino \
+	  kmod-usb-net kmod-usb-net-smsc95xx kmod-gpio-mcp23s08 \
+	  kmod-leds-gpio kmod-ledtrig-heartbeat kmod-sound-core
+endef
+
+define Profile/olinuxino-maxi/Description
+	Olimex OLinuXino Maxi/Mini boards
+endef
+
+$(eval $(call Profile,olinuxino-maxi))

target/linux/mxs/profiles/03-olinuxino-micro.mk

@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/olinuxino-micro
+  NAME:=Olimex OLinuXino Micro/Nano boards
+  PACKAGES += imx-bootlets uboot-mxs-mx23_olinuxino \
+	  kmod-gpio-mcp23s08 kmod-leds-gpio kmod-ledtrig-heartbeat
+endef
+
+define Profile/olinuxino-micro/Description
+	Olimex OLinuXino Micro/Nano boards
+endef
+
+$(eval $(call Profile,olinuxino-micro))