Initial commit

target/linux/orion/base-files/etc/board.d/02_network

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+if grep -q lan1 /proc/net/dev; then
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+else
+	ucidef_set_interface_lan "eth0"
+fi
+
+board_config_flush
+
+exit 0

target/linux/orion/base-files/etc/hotplug.d/usb/10-usb

@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+usb_led=''
+usb_device=''
+
+led_set_attr() {
+	[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+usb_led_set_timer() {
+	led_set_attr "${usb_led}" 'trigger' 'timer'
+	led_set_attr "${usb_led}" 'delay_on' "$1"
+	led_set_attr "${usb_led}" 'delay_off' "$2"
+}
+
+usb_led_on() {
+	led_set_attr "${usb_led}" 'trigger' 'none'
+	led_set_attr "${usb_led}" 'brightness' 255
+}
+
+usb_led_off() {
+	led_set_attr "${usb_led}" 'trigger' 'none'
+	led_set_attr "${usb_led}" 'brightness' 0
+}
+
+get_usb_led() {
+	. /lib/functions.sh
+
+	case "$(board_name)" in
+	 'Linksys WRT350N v2')
+		usb_led='wrt350nv2:green:usb'
+		usb_device='1-1:1.0'
+		;;
+	esac;
+}
+
+get_usb_led
+
+case "${ACTION}" in
+ add)
+	# update LEDs
+	[ "${usb_device}" = "${DEVICENAME}" ] && usb_led_on
+	;;
+ remove)
+	# update LEDs
+	[ "${usb_device}" = "${DEVICENAME}" ] && usb_led_off
+	;;
+esac

target/linux/orion/base-files/lib/preinit/01_sysinfo

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+do_sysinfo_orion() {
+	local name="$(sed -n /Hardware/s/.*:.//p /proc/cpuinfo)"
+	[ -z "$name" ] && name="unknown"
+
+	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
+	echo "$name" > /tmp/sysinfo/board_name
+	echo "unknown" > /tmp/sysinfo/model
+}
+
+boot_hook_add preinit_main do_sysinfo_orion