Initial commit

2025-06-24 15:51:28 +02:00
commit 22031d9dab
6862 changed files with 1462554 additions and 0 deletions
--- a/target/linux/ramips/dts/DCH-M225.dts
+++ b/target/linux/ramips/dts/DCH-M225.dts
@@ -0,0 +1,180 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
+	model = "D-Link DCH-M225";
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "dch-m225:green:power";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		status {
+			label = "dch-m225:red:status";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Audio-I2S";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"Headphones", "HP_L",
+			"Headphones", "HP_R";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,hp-det-gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+
+		dailink0_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	codec: wm8960@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+
+		wlf,shared-lrclk;
+	};
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_refclk_pins>;
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x4000>;
+			read-only;
+		};
+
+		factory: partition@34000 {
+			label = "factory";
+			reg = <0x34000 0x4000>;
+			read-only;
+		};
+
+		nvram: partition@38000 {
+			label = "nvram";
+			reg = <0x38000 0x8000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "devconf";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "upgrade_rec";
+			reg = <0x50000 0x100000>;
+			read-only;
+		};
+
+		partition@150000 {
+			label = "firmware";
+			reg = <0x150000 0x6b0000>;
+		};
+	};
+};
+
+&gdma {
+	status = "okay";
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "wdt", "rgmii1";
+			ralink,function = "gpio";
+		};
+
+		gpio_i2s {
+			ralink,group = "uartf";
+			ralink,function = "gpio i2s";
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
+
+&gsw {
+	ralink,port4 = "ephy";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pa_pins>;
+};