Initial commit

target/linux/ramips/dts/V11STFE.dts

@@ -0,0 +1,86 @@
+/dts-v1/;
+
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "ralink,v11st-fe", "ralink,rt2880-soc";
+	model = "Ralink V11ST-FE";
+
+	pci@440000 {
+		status = "okay";
+
+		host-bridge {
+			pci-bridge@1 {
+				status = "okay";
+			};
+		};
+	};
+
+	nor-flash@1c000000 {
+		compatible = "cfi-flash";
+		reg = <0x1c000000 0x800000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x0 0x0030000>;
+			label = "u-boot";
+			read-only;
+		};
+
+		partition@30000 {
+			reg = <0x00030000 0x00010000>;
+			label = "u-boot-env";
+			read-only;
+		};
+
+		factory: partition@40000 {
+			reg = <0x00040000 0x00010000>;
+			label = "factory";
+			read-only;
+		};
+
+		partition@50000 {
+			reg = <0x00050000 0x003b0000>;
+			label = "firmware";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "v11st-fe:green:status";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};