Initial commit

target/linux/ramips/dts/WLR-6000.dts

@@ -0,0 +1,187 @@
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "sitecom,wlr-6000", "ralink,rt3883-soc";
+	model = "Sitecom WLR-6000";
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "wlr-6000:red:power";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		ops {
+			label = "wlr-6000:white:ops";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		usb {
+			gpio-export,name = "usb";
+			gpio-export,output = <1>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "jtag", "uartf";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	mtd-mac-address = <&factory 0x8004>;
+	mtd-mac-address-increment = <1>;
+
+	port@0 {
+		phy-handle = <&phy0>;
+		phy-mode = "rgmii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+
+			qca,ar8327-initvals = <
+				0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+				0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+				0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
+				0x50 0xc437c437 /* LED Control Register 0 */
+				0x54 0xc337c337 /* LED Control Register 1 */
+				0x58 0x00000000 /* LED Control Register 2 */
+				0x5c 0x03ffff00 /* LED Control Register 3 */
+				0x7c 0x0000007e /* PORT0_STATUS */
+				0x94 0x0000007e /* PORT6 STATUS */
+			>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <8600000>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x713000>;
+		};
+
+		partition@763000 {
+			label = "manufacture";
+			reg = <0x763000 0x7D000>;
+			read-only;
+		};
+
+		partition@7E0000 {
+			label = "backup";
+			reg = <0x7E0000 0x10000>;
+			read-only;
+		};
+
+		partition@7F0000 {
+			label = "storage";
+			reg = <0x7F0000 0x10000>;
+			read-only;
+		};
+	};
+};
+
+&pci {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pci_pins>;
+
+	pci_pins: pci {
+		pci {
+			ralink,group = "pci";
+			ralink,function = "pci-fnc";
+		};
+	};
+
+	host-bridge {
+		pci-bridge@1 {
+			status = "okay";
+
+			wifi@1814,3091 {
+				compatible = "pci1814,3091";
+				reg = <0x10000 0 0 0 0>;
+				ralink,mtd-eeprom = <&factory 0x8000>;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+	ralink,2ghz = <0>;
+	ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};