Initial commit

package/base-files/files/etc/init.d/boot

@@ -0,0 +1,51 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=10
+STOP=90
+
+uci_apply_defaults() {
+	. /lib/functions/system.sh
+
+	cd /etc/uci-defaults || return 0
+	files="$(ls)"
+	[ -z "$files" ] && return 0
+	mkdir -p /tmp/.uci
+	for file in $files; do
+		( . "./$(basename $file)" ) && rm -f "$file"
+	done
+	uci commit
+}
+
+boot() {
+	[ -f /proc/mounts ] || /sbin/mount_root
+	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
+	[ -f /proc/net/vlan/config ] && vconfig set_name_type DEV_PLUS_VID_NO_PAD
+
+	mkdir -p /var/run
+	mkdir -p /var/log
+	mkdir -p /var/lock
+	mkdir -p /var/state
+	mkdir -p /var/tmp
+	mkdir -p /tmp/.uci
+	chmod 0700 /tmp/.uci
+	touch /var/log/wtmp
+	touch /var/log/lastlog
+	touch /tmp/resolv.conf.auto
+	ln -sf /tmp/resolv.conf.auto /tmp/resolv.conf
+	grep -q debugfs /proc/filesystems && /bin/mount -o noatime -t debugfs debugfs /sys/kernel/debug
+	[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
+
+	/sbin/kmodloader
+
+	[ ! -f /etc/config/wireless ] && {
+		# compat for brcm47xx and mvebu
+		sleep 1
+	}
+
+	/bin/config_generate
+	uci_apply_defaults
+	
+	# temporary hack until configd exists
+	/sbin/reload_config
+}

package/base-files/files/etc/init.d/done

@@ -0,0 +1,17 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=95
+boot() {
+	mount_root done
+	rm -f /sysupgrade.tgz
+
+	# process user commands
+	[ -f /etc/rc.local ] && {
+		sh /etc/rc.local
+	}
+
+	# set leds to normal state
+	. /etc/diag.sh
+	set_state done
+}

package/base-files/files/etc/init.d/gpio_switch

@@ -0,0 +1,48 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2015 OpenWrt.org
+
+START=94
+STOP=10
+USE_PROCD=1
+
+
+load_gpio_switch()
+{
+	local name
+	local gpio_pin
+	local value
+
+	config_get gpio_pin "$1" gpio_pin
+	config_get name "$1" name
+	config_get value "$1" value 0
+
+	local gpio_path="/sys/class/gpio/gpio${gpio_pin}"
+	# export GPIO pin for access
+	[ -d "$gpio_path" ] || {
+		echo "$gpio_pin" >/sys/class/gpio/export
+		# we need to wait a bit until the GPIO appears
+		[ -d "$gpio_path" ] || sleep 1
+	}
+
+	# direction attribute only exists if the kernel supports changing the
+	# direction of a GPIO
+	if [ -e "${gpio_path}/direction" ]; then
+		# set the pin to output with high or low pin value
+		{ [ "$value" = "0" ] && echo "low" || echo "high"; } >"$gpio_path/direction"
+	else
+		{ [ "$value" = "0" ] && echo "0" || echo "1"; } >"$gpio_path/value"
+	fi
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "system"
+}
+
+start_service()
+{
+	[ -e /sys/class/gpio/ ] && {
+		config_load system
+		config_foreach load_gpio_switch gpio_switch
+	}
+}

package/base-files/files/etc/init.d/led

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2008 OpenWrt.org
+
+START=96
+
+load_led() {
+	local name
+	local sysfs
+	local trigger
+	local dev
+	local ports
+	local mode
+	local default
+	local delayon
+	local delayoff
+	local interval
+
+	config_get sysfs $1 sysfs
+	config_get name $1 name "$sysfs"
+	config_get trigger $1 trigger "none"
+	config_get dev $1 dev
+	config_get ports $1 port
+	config_get mode $1 mode
+	config_get_bool default $1 default "nil"
+	config_get delayon $1 delayon
+	config_get delayoff $1 delayoff
+	config_get interval $1 interval "50"
+	config_get port_state $1 port_state
+	config_get delay $1 delay "150"
+	config_get message $1 message ""
+	config_get gpio $1 gpio "0"
+	config_get inverted $1 inverted "0"
+
+	if [ "$trigger" = "rssi" ]; then
+		# handled by rssileds userspace process
+		return
+	fi
+
+	[ "$trigger" = "usbdev" ] && {
+		# Backward compatibility: translate to the new trigger
+		trigger="usbport"
+		# Translate port of root hub, e.g. 4-1 -> usb4-port1
+		ports=$(echo "$dev" | sed -n 's/^\([0-9]*\)-\([0-9]*\)$/usb\1-port\2/p')
+		# Translate port of extra hub, e.g. 2-2.4 -> 2-2-port4
+		[ -z "$ports" ] && ports=$(echo "$dev" | sed -n 's/\./-port/p')
+	}
+
+	[ -e /sys/class/leds/${sysfs}/brightness ] && {
+		echo "setting up led ${name}"
+
+		printf "%s %s %d\n" \
+			"$sysfs" \
+			"$(sed -ne 's/^.*\[\(.*\)\].*$/\1/p' /sys/class/leds/${sysfs}/trigger)" \
+			"$(cat /sys/class/leds/${sysfs}/brightness)" \
+				>> /var/run/led.state
+
+		[ "$default" = 0 ] &&
+			echo 0 >/sys/class/leds/${sysfs}/brightness
+
+		echo $trigger > /sys/class/leds/${sysfs}/trigger 2> /dev/null
+		ret="$?"
+
+		[ $default = 1 ] &&
+			cat /sys/class/leds/${sysfs}/max_brightness > /sys/class/leds/${sysfs}/brightness
+
+		[ $ret = 0 ] || {
+			echo >&2 "Skipping trigger '$trigger' for led '$name' due to missing kernel module"
+			return 1
+		}
+		case "$trigger" in
+		"netdev")
+			[ -n "$dev" ] && {
+				echo $dev > /sys/class/leds/${sysfs}/device_name
+				for m in $mode; do
+					[ -e "/sys/class/leds/${sysfs}/$m" ] && \
+						echo 1 > /sys/class/leds/${sysfs}/$m
+				done
+				echo $interval > /sys/class/leds/${sysfs}/interval
+			}
+			;;
+
+		"timer"|"oneshot")
+			[ -n "$delayon" ] && \
+				echo $delayon > /sys/class/leds/${sysfs}/delay_on
+			[ -n "$delayoff" ] && \
+				echo $delayoff > /sys/class/leds/${sysfs}/delay_off
+			;;
+
+		"usbport")
+			local p
+
+			for p in $ports; do
+				echo 1 > /sys/class/leds/${sysfs}/ports/$p
+			done
+			;;
+
+		"port_state")
+			[ -n "$port_state" ] && \
+				echo $port_state > /sys/class/leds/${sysfs}/port_state
+			;;
+
+		"gpio")
+			echo $gpio > /sys/class/leds/${sysfs}/gpio
+			echo $inverted > /sys/class/leds/${sysfs}/inverted
+			;;
+
+		switch[0-9]*)
+			local port_mask speed_mask
+
+			config_get port_mask $1 port_mask
+			[ -n "$port_mask" ] && \
+				echo $port_mask > /sys/class/leds/${sysfs}/port_mask
+			config_get speed_mask $1 speed_mask
+			[ -n "$speed_mask" ] && \
+				echo $speed_mask > /sys/class/leds/${sysfs}/speed_mask
+			[ -n "$mode" ] && \
+				echo "$mode" > /sys/class/leds/${sysfs}/mode
+			;;
+		esac
+	}
+}
+
+start() {
+	[ -e /sys/class/leds/ ] && {
+		[ -s /var/run/led.state ] && {
+			local led trigger brightness
+			while read led trigger brightness; do
+				[ -e "/sys/class/leds/$led/trigger" ] && \
+					echo "$trigger" > "/sys/class/leds/$led/trigger"
+
+				[ -e "/sys/class/leds/$led/brightness" ] && \
+					echo "$brightness" > "/sys/class/leds/$led/brightness"
+			done < /var/run/led.state
+			rm /var/run/led.state
+		}
+
+		config_load system
+		config_foreach load_led led
+	}
+}

package/base-files/files/etc/init.d/sysctl

@@ -0,0 +1,44 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=11
+
+apply_defaults() {
+	local mem="$(awk '/^MemTotal:/ {print $2}' /proc/meminfo)"
+	local min_free frag_low_thresh frag_high_thresh
+
+	if [ "$mem" -gt 65536 ]; then # 128M
+		min_free=16384
+	elif [ "$mem" -gt 32768 ]; then # 64M
+		min_free=8192
+	else
+		min_free=1024
+		frag_low_thresh=393216
+		frag_high_thresh=524288
+	fi
+
+	sysctl -qw vm.min_free_kbytes="$min_free"
+
+	[ "$frag_low_thresh" ] && sysctl -qw \
+		net.ipv4.ipfrag_low_thresh="$frag_low_thresh" \
+		net.ipv4.ipfrag_high_thresh="$frag_high_thresh" \
+		net.ipv6.ip6frag_low_thresh="$frag_low_thresh" \
+		net.ipv6.ip6frag_high_thresh="$frag_high_thresh" \
+		net.netfilter.nf_conntrack_frag6_low_thresh="$frag_low_thresh" \
+		net.netfilter.nf_conntrack_frag6_high_thresh="$frag_high_thresh"
+
+	# first set default, then all interfaces to avoid races with appearing interfaces
+	if [ -d /proc/sys/net/ipv6/conf ]; then
+		echo 0 > /proc/sys/net/ipv6/conf/default/accept_ra
+		for iface in /proc/sys/net/ipv6/conf/*/accept_ra; do
+			echo 0 > "$iface"
+		done
+	fi
+}
+
+start() {
+	apply_defaults
+	for CONF in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		[ -f "$CONF" ] && sysctl -e -p "$CONF" >&-
+	done
+}

package/base-files/files/etc/init.d/sysfixtime

@@ -0,0 +1,34 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2013-2014 OpenWrt.org
+
+START=00
+STOP=90
+
+RTC_DEV=/dev/rtc0
+HWCLOCK=/sbin/hwclock
+
+boot() {
+	start && exit 0
+
+	local maxtime="$(maxtime)"
+	local curtime="$(date +%s)"
+	[ $curtime -lt $maxtime ] && date -s @$maxtime
+}
+
+start() {
+	[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && $HWCLOCK -s -u -f $RTC_DEV
+}
+
+stop() {
+	[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && $HWCLOCK -w -u -f $RTC_DEV && \
+		logger -t sysfixtime "saved '$(date)' to $RTC_DEV"
+}
+
+maxtime() {
+	local file newest
+
+	for file in $( find /etc -type f ) ; do
+		[ -z "$newest" -o "$newest" -ot "$file" ] && newest=$file
+	done
+	[ "$newest" ] && date -r "$newest" +%s
+}

package/base-files/files/etc/init.d/system

@@ -0,0 +1,46 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2014 OpenWrt.org
+
+START=10
+USE_PROCD=1
+
+validate_system_section()
+{
+	uci_load_validate system system "$1" "$2" \
+		'hostname:string:OpenWrt' \
+		'conloglevel:uinteger' \
+		'buffersize:uinteger' \
+		'timezone:string:UTC' \
+		'zonename:string'
+}
+
+system_config() {
+	[ "$2" = 0 ] || {
+		echo "validation failed"
+		return 1
+	}
+
+	echo "$hostname" > /proc/sys/kernel/hostname
+	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
+	echo "$timezone" > /tmp/TZ
+	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/$zonename" ] && \
+		ln -sf "/usr/share/zoneinfo/$zonename" /tmp/localtime && rm -f /tmp/TZ
+
+	# apply timezone to kernel
+	date -k
+}
+
+reload_service() {
+	config_load system
+	config_foreach validate_system_section system system_config
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "system"
+	procd_add_validation validate_system_section
+}
+
+start_service() {
+	reload_service
+}

package/base-files/files/etc/init.d/umount

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+STOP=90
+
+restart() {
+	:
+}
+
+stop() {
+	sync
+	/bin/umount -a -d -r
+}