domenico/openwrt-19.07
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
domenico
2025-06-24 16:03:39 +02:00
commit f3256cdaf2
6949 changed files with 1441681 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

217
target/linux/ath79/dts/ar1022_iodata_wn-ag300dgr.dts Normal file
View File

@@ -0,0 +1,217 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
compatible = "iodata,wn-ag300dgr", "qca,ar9344";
model = "I-O DATA WN-AG300DGR";
aliases {
led-boot = &router;
led-failsafe = &router;
led-running = &router;
led-upgrade = &router;
};
leds {
compatible = "gpio-leds";
router: router {
label = "wn-ag300dgr:green:router";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
children {
label = "wn-ag300dgr:green:children";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
eco {
label = "wn-ag300dgr:green:eco";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
notification {
label = "wn-ag300dgr:amber:notification";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "wn-ag300dgr:green:wlan2g";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "wn-ag300dgr:green:wlan5g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
eco {
label = "eco";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
debounce-interval = <60>;
};
router {
label = "router";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
auto {
label = "auto";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
children {
label = "children";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
debounce-interval = <60>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x030000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x030000 0x010000>;
read-only;
};
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x040000 0xf10000>;
};
partition@f50000 {
label = "manufacture";
reg = <0xf50000 0x40000>;
read-only;
};
partition@f90000 {
label = "backup";
reg = <0xf90000 0x10000>;
read-only;
};
partition@fa0000 {
label = "storage";
reg = <0xfa0000 0x50000>;
read-only;
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07a00000 /* PORT0 PAD MODE CTRL */
0x7c 0x000000fe /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x06000000 0x00000101 0x00001616>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
};
};
&pcie {
status = "okay";
};
&uart {
status = "okay";
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
qca,no-eeprom;
};

221
target/linux/ath79/dts/ar7100.dtsi Normal file
View File

@@ -0,0 +1,221 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar7100";
chosen {
bootargs = "console=ttyS0,115200";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar7100-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
usb_phy: usb-phy@18030000 {
compatible = "qca,ar7100-usb-phy";
reg = <0x18030000 0x10>;
reset-names = "usb-phy", "usb-host", "usb-ohci-dll";
resets = <&rst 4>, <&rst 5>, <&rst 6>;
#phy-cells = <0>;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar7100-gpio";
reg = <0x18040000 0x30>;
interrupts = <2>;
ngpios = <16>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pll: pll-controller@18050000 {
compatible = "qca,ar7100-pll", "syscon";
reg = <0x18050000 0x20>;
clock-names = "ref";
/* The board must provides the ref clock */
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
pci_intc: interrupt-controller@18060018 {
compatible = "qca,ar7100-misc-intc";
reg = <0x18060018 0x4>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
rst: reset-controller@18060024 {
compatible = "qca,ar7100-reset";
reg = <0x18060024 0x4>;
#reset-cells = <1>;
};
pcie0: pcie-controller@17010000 {
compatible = "qca,ar7100-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x17010000 0x100>;
reg-names = "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&pci_intc>;
interrupts = <4>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xf800 0 0 0>;
interrupt-map = <0x8800 0 0 0 &pci_intc 0
0x9000 0 0 0 &pci_intc 1
0x9800 0 0 0 &pci_intc 2>;
status = "disabled";
};
};
};
usb2: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupt-parent = <&cpuintc>;
interrupts = <3>;
phy-names = "usb-phy";
phys = <&usb_phy>;
has-synopsys-hc-bug;
status = "disabled";
};
usb1: usb@1c000000 {
compatible = "generic-ohci";
reg = <0x1c000000 0x1000>;
interrupt-parent = <&miscintc>;
interrupts = <6>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};
&miscintc {
compatible = "qca,ar7100-misc-intc";
};
&eth0 {
compatible = "qca,ar7100-eth", "syscon";
reg = <0x19000000 0x200
0x18070000 0x4>;
pll-data = <0x00110000 0x00001099 0x00991099>;
pll-reg = <0x4 0x10 17>;
pll-handle = <&pll>;
phy-mode = "rgmii";
resets = <&rst 9>;
reset-names = "mac";
qca,mac-idx = <0>;
};
&mdio1 {
builtin-switch;
};
&eth1 {
compatible = "qca,ar7100-eth", "syscon";
reg = <0x1a000000 0x200
0x18070004 0x4>;
pll-data = <0x00110000 0x00001099 0x00991099>;
pll-reg = <0x4 0x14 19>;
pll-handle = <&pll>;
phy-mode = "rgmii";
resets = <&rst 13>;
reset-names = "mac";
qca,mac-idx = <1>;
};

190
target/linux/ath79/dts/ar7161_aruba_ap-105.dts Normal file
View File

@@ -0,0 +1,190 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
compatible = "aruba,ap-105", "qca,ar7161";
model = "Aruba AP-105";
chosen {
bootargs = "console=ttyS0,9600";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_green;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
power_green: power_green {
label = "ap-105:green:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
power_red: power_red {
label = "ap-105:red:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
panic-indicator;
};
wifi_2g_red: wifi_2g_red {
label = "ap-105:red:wlan2g";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
wifi_5g_red: wifi_5g_red {
label = "ap-105:red:wlan5g";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wifi_2g_green {
label = "ap-105:green:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wifi_5g_green {
label = "ap-105:green:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
};
i2c {
compatible = "i2c-gpio";
sda-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
scl-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
/* can be removed on 4.19 */
gpios = <&gpio 5 GPIO_ACTIVE_LOW>,
<&gpio 4 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
tpm@29 {
compatible = "atmel,at97sc3203s";
reg = <0x29>;
/* triggering it, will also kill system */
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 { /* 2.4 GHz */
compatible = "pci168c,0029";
mtd-mac-address = <&hwinfo 0x1c>;
mtd-mac-address-increment = <1>;
reg = <0x8800 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 { /* 5 GHz */
compatible = "pci168c,0029";
mtd-mac-address = <&hwinfo 0x1c>;
mtd-mac-address-increment = <2>;
reg = <0x9000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&hwinfo 0x1c>;
pll-data = <0x00110000 0x00001099 0x00991099>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x40000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0xfa0000>;
compatible = "denx,uimage";
};
hwinfo: partition@fe0000 {
label = "hwinfo";
reg = <0xfe0000 0x10000>;
read-only;
};
partition@ff0000 {
label = "u-boot-env";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};

273
target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts Normal file
View File

@@ -0,0 +1,273 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
model = "Buffalo WZR-HP-AG300H/WZR-600DHP";
aliases {
led-boot = &diag;
led-failsafe = &diag;
led-upgrade = &diag;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
gpio-leds {
compatible = "gpio-leds";
diag: diag {
label = "buffalo:red:diag";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
// those leds are indeed attached to the wifi chips
compatible = "gpio-leds";
band2g_a {
label = "buffalo:amber:band2g";
gpios = <&ath9k0 1 GPIO_ACTIVE_LOW>;
};
usb {
label = "buffalo:green:usb";
gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
linux,default-trigger = "usbport";
};
band2g_g {
label = "buffalo:green:band2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
band5g_g {
label = "buffalo:green:band5g";
gpios = <&ath9k1 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
router {
label = "buffalo:green:router";
gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
};
movie_engine {
label = "buffalo:blue:movie_engine";
gpios = <&ath9k1 4 GPIO_ACTIVE_LOW>;
};
band5g_a {
label = "buffalo:amber:band5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
usb {
linux,code = <BTN_2>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
aoss {
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_auto {
linux,code = <BTN_6>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_off {
linux,code = <BTN_5>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
movie_engine {
linux,code = <BTN_7>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb_power {
gpio-export,name = "buffalo:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
};
flash {
compatible = "mtd-concat";
devices = <&flash0 &flash1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x0040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x0040000 0x0010000>;
read-only;
};
art: partition@50000 {
label = "art";
reg = <0x0050000 0x0010000>;
read-only;
};
partition@60000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x0060000 0x1f90000>;
};
partition@1ff0000 {
label = "user_property";
reg = <0x1ff0000 0x0010000>;
read-only;
};
};
};
};
&usb_phy {
status = "okay";
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 {
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 {
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <2>;
cs-gpios = <0>, <0>;
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
};
flash1: flash@1 {
compatible = "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <104000000>;
m25p,fast-read;
};
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x120c>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x520c>;
mtd-mac-address-increment = <1>;
phy-handle = <&phy4>;
};

237
target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts Normal file
View File

@@ -0,0 +1,237 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
compatible = "dlink,dir-825-b1", "qca,ar7161";
model = "D-Link DIR825B1";
aliases {
led-boot = &orange_power;
led-failsafe = &orange_power;
led-running = &blue_power;
led-upgrade = &orange_power;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
blue_usb {
label = "d-link:blue:usb";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
linux,default-trigger = "usbport";
};
orange_power: orange_power {
label = "d-link:orange:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
blue_power: blue_power {
label = "d-link:blue:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
blue_wps {
label = "d-link:blue:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
orange_planet {
label = "d-link:orange:planet";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
blue_planet {
label = "d-link:blue:planet";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "d-link:blue:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "d-link:blue:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
realtek,initvals = <0x06 0x0108>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
phy-mask = <0x10>;
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
};
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 {
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 {
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "config";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x610000>;
};
caldata: partition@60000 {
label = "caldata";
reg = <0x660000 0x010000>;
read-only;
};
partition@670000 {
label = "unknown";
reg = <0x670000 0x190000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
phy-handle = <&phy4>;
};

126
target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts Normal file
View File

@@ -0,0 +1,126 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
model = "jjPlus JA76PF2";
compatible = "jjplus,ja76pf2", "qca,ar7161";
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &d2;
led-failsafe = &d2;
led-running = &d2;
led-upgrade = &d2;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
d2: d2 {
label = "ja76pf2:green:d2";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
d3 {
label = "ja76pf2:green:d3";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
d4 {
label = "ja76pf2:green:d4";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
sw1 {
label = "sw1";
linux,code = <KEY_RESTART>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
sw2 {
label = "sw2";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
phy-handle = <&phy0>;
};
&eth1 {
status = "okay";
phy-handle = <&phy4>;
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ecoscentric,redboot-fis-partitions";
};
};
};
&uart {
status = "okay";
};

55
target/linux/ath79/dts/ar7161_netgear_wndr3700.dts Normal file
View File

@@ -0,0 +1,55 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7161_netgear_wndr3700.dtsi"
/ {
compatible = "netgear,wndr3700", "qca,ar7161";
model = "Netgear WNDR3700";
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x000000 0x050000>;
read-only;
};
partition@50000 {
label = "u-boot-env";
reg = <0x050000 0x020000>;
};
partition@70000 {
label = "firmware";
reg = <0x070000 0x780000>;
compatible = "netgear,uimage";
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
&ath9k1 {
/* The original WNDR3700(v1) variant have four antennae dedicated
* to the 5GHz radio as well. Again, two antennae are available for
* each chain to switch between. The following configuration is the
* default setting which taken from the vendor's wifi
* code for that radio.
*
* All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
* [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
*/
antenna-demux {
gpio-hog;
line-name = "fixed antenna group 2";
gpios = <6 GPIO_ACTIVE_LOW>,
<7 GPIO_ACTIVE_HIGH>,
<8 GPIO_ACTIVE_HIGH>,
<9 GPIO_ACTIVE_LOW>;
output-high;
};
};

230
target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi Normal file
View File

@@ -0,0 +1,230 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
aliases {
led-boot = &power_orange;
led-failsafe = &power_orange;
led-running = &power_green;
led-upgrade = &power_orange;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
reset-leds {
compatible = "reset-leds";
usb_led {
label = "netgear:green:usb";
resets = <&rst 12>;
trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
linux,default-trigger = "usbport";
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "netgear:orange:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
label = "netgear:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
power_orange: power_orange {
label = "netgear:orange:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps_green {
label = "netgear:green:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wan_green {
label = "netgear:green:wan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "netgear:green:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "netgear:blue:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
phy-mask = <0x10>;
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
};
};
&usb_phy {
status = "okay";
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 {
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0x10000>;
mtd-mac-address = <&art 0x0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
/* all WNDR3700 variants have four antennae dedicated
* to the 2.4GHz radio. Two antennae are available for
* each chain. The following configuration is the
* default setting which taken from the vendor's wifi
* code for that radio.
*
* All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
* [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
*/
antenna-demux {
gpio-hog;
line-name = "fixed antenna group 1";
gpios = <6 GPIO_ACTIVE_LOW>,
<7 GPIO_ACTIVE_HIGH>,
<8 GPIO_ACTIVE_LOW>,
<9 GPIO_ACTIVE_HIGH>;
output-high;
};
};
ath9k1: wifi@0,12 {
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0x10000>;
mtd-mac-address = <&art 0xc>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
&eth0 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
mtd-mac-address = <&art 0x00>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
mtd-mac-address = <&art 0x06>;
phy-handle = <&phy4>;
};

34
target/linux/ath79/dts/ar7161_netgear_wndr3700v2.dts Normal file
View File

@@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7161_netgear_wndr3700.dtsi"
/ {
compatible = "netgear,wndr3700v2", "qca,ar7161";
model = "Netgear WNDR3700v2";
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x000000 0x050000>;
read-only;
};
partition@50000 {
label = "u-boot-env";
reg = <0x050000 0x020000>;
};
partition@70000 {
label = "firmware";
reg = <0x070000 0xf80000>;
compatible = "netgear,uimage";
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};

36
target/linux/ath79/dts/ar7161_netgear_wndr3800.dts Normal file
View File

@@ -0,0 +1,36 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7161_netgear_wndr3700.dtsi"
/ {
compatible = "netgear,wndr3800", "qca,ar7161";
model = "Netgear WNDR3800";
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x000000 0x050000>;
read-only;
};
partition@50000 {
label = "u-boot-env";
reg = <0x050000 0x020000>;
read-only;
};
partition@70000 {
label = "firmware";
reg = <0x070000 0xf80000>;
compatible = "netgear,uimage";
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};

31
target/linux/ath79/dts/ar7161_ubnt_routerstation-pro.dts Normal file
View File

@@ -0,0 +1,31 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7161_ubnt_routerstation.dtsi"
/ {
compatible = "ubnt,routerstation-pro", "qca,ar7161";
model = "Ubiquiti RouterStation Pro";
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&eth0 {
phy-mode = "rgmii";
phy-handle = <&phy4>;
};
&eth1 {
phy-mode = "rgmii";
phy-handle = <&phy0>;
};

27
target/linux/ath79/dts/ar7161_ubnt_routerstation.dts Normal file
View File

@@ -0,0 +1,27 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7161_ubnt_routerstation.dtsi"
/ {
compatible = "ubnt,routerstation", "qca,ar7161";
model = "Ubiquiti Networks RouterStation";
};
&eth0 {
phy-mode = "mii";
fixed-link {
speed = <100>;
full-duplex;
};
};
&eth1 {
phy-mode = "rmii";
fixed-link {
speed = <100>;
full-duplex;
};
};

101
target/linux/ath79/dts/ar7161_ubnt_routerstation.dtsi Normal file
View File

@@ -0,0 +1,101 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
aliases {
led-boot = &rf;
led-failsafe = &rf;
led-running = &rf;
led-upgrade = &rf;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
rf: rf_green {
label = "ubnt:green:rf";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
wps {
label = "sw4";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&eth0 {
status = "okay";
};
&eth1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "ecoscentric,redboot-fis-partitions";
};
};
};
&uart {
status = "okay";
};
&usb_phy {
status = "okay";
};
&usb1 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};

88
target/linux/ath79/dts/ar7240.dtsi Normal file
View File

@@ -0,0 +1,88 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar724x.dtsi"
/ {
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-ohci-dll";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&ahb {
usb: usb@1b000000 {
compatible = "generic-ohci";
reg = <0x1b000000 0x1000>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
};
&mdio0 {
status = "okay";
compatible = "qca,ar7240-mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar7240sw";
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
qca,mib-poll-interval = <500>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
swphy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
};
};
&eth0 {
status = "okay";
compatible = "qca,ar7240-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 9>;
reset-names = "mac";
phy-mode = "mii";
phy-handle = <&swphy4>;
};
&eth1 {
compatible = "qca,ar7240-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 13>;
reset-names = "mac";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};

190
target/linux/ath79/dts/ar7240_buffalo_whr-g301n.dts Normal file
View File

@@ -0,0 +1,190 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7240.dtsi"
/ {
compatible = "buffalo,whr-g301n", "qca,ar7240";
model = "Buffalo WHR-G301N";
aliases {
led-boot = &diag;
led-failsafe = &diag;
led-upgrade = &diag;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
router_on {
label = "router_on";
linux,code = <BTN_2>;
linux,input-type = <EV_SW>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_off {
label = "router_off";
linux,code = <BTN_3>;
linux,input-type = <EV_SW>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_pins>;
security {
label = "whr-g301n:orange:security";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
diag: diag {
label = "whr-g301n:red:diag";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
router {
label = "whr-g301n:green:router";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "whr-g301n:green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "whr-g301n:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "whr-g301n:green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "whr-g301n:green:lan4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan {
label = "whr-g301n:green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "whr-g301n:green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x3e000>;
label = "u-boot";
read-only;
};
partition@3e000 {
reg = <0x3e000 0x2000>;
label = "u-boot-env";
read-only;
};
partition@40000 {
compatible = "denx,uimage";
reg = <0x40000 0x3a0000>;
label = "firmware";
};
partition@3e0000 {
reg = <0x3e0000 0x10000>;
label = "user_property";
read-only;
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
mtd-mac-address = <&art 0x120c>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x120c>;
mtd-mac-address-increment = <1>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002a";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
mtd-mac-address = <&art 0x120c>;
#gpio-cells = <2>;
gpio-controller;
};
};
&pinmux {
switch_led_pins: switch_led_pins {
pinctrl-single,bits = <0x0 0x0 0xf8>;
};
};
&uart {
status = "okay";
};

10
target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts Normal file
View File

@@ -0,0 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_netgear_wnr612-v2.dtsi"
/ {
compatible = "netgear,wnr612-v2", "qca,ar7240";
model = "Netgear WNR612 v2";
};

133
target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi Normal file
View File

@@ -0,0 +1,133 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7240.dtsi"
/ {
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
ath9k-keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
power: power {
label = "netgear:green:power";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "netgear:green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "netgear:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wan {
label = "netgear:green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan: wlan {
label = "netgear:green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x40000>;
label = "u-boot";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "u-boot-env";
};
partition@50000 {
compatible = "netgear,uimage";
reg = <0x50000 0x3a0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002b";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};

10
target/linux/ath79/dts/ar7240_on_n150r.dts Normal file
View File

@@ -0,0 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_netgear_wnr612-v2.dtsi"
/ {
compatible = "on,n150r", "qca,ar7240";
model = "ON Network N150R";
};

122
target/linux/ath79/dts/ar7240_tplink.dtsi Normal file
View File

@@ -0,0 +1,122 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7240.dtsi"
/ {
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds: leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinmux_switch_led_pins>;
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth1 {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
mtd-mac-address = <&uboot 0x1fc00>;
#gpio-cells = <2>;
gpio-controller;
};
};
&pinmux {
pinmux_switch_led_pins: switch_led_pins {
pinctrl-single,bits = <0x0 0x0 0xf8>;
};
};
&uart {
status = "okay";
};

22
target/linux/ath79/dts/ar7240_tplink_tl-wa.dtsi Normal file
View File

@@ -0,0 +1,22 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7240_tplink.dtsi"
&leds {
lan {
label = "tp-link:green:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
&eth0 {
compatible = "syscon", "simple-mfd";
};
&eth1 {
mtd-mac-address = <&uboot 0x1fc00>;
};
&ath9k {
compatible = "pci168c,002a";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wa701nd-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wa.dtsi"
/ {
model = "TP-Link TL-WA701ND v1";
compatible = "tplink,tl-wa701nd-v1", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wa730re-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wa.dtsi"
/ {
model = "TP-Link TL-WA730RE v1";
compatible = "tplink,tl-wa730re-v1", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wa801nd-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wa.dtsi"
/ {
model = "TP-Link TL-WA801ND v1";
compatible = "tplink,tl-wa801nd-v1", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wa830re-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wa.dtsi"
/ {
model = "TP-Link TL-WA830RE v1";
compatible = "tplink,tl-wa830re-v1", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wa901nd-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wa.dtsi"
/ {
model = "TP-Link TL-WA901ND v1";
compatible = "tplink,tl-wa901nd-v1", "qca,ar7240";
};

44
target/linux/ath79/dts/ar7240_tplink_tl-wr.dtsi Normal file
View File

@@ -0,0 +1,44 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7240_tplink.dtsi"
&leds {
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
&eth0 {
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&ath9k {
compatible = "pci168c,002b";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr.dtsi"
/ {
model = "TP-Link TL-WR740N v1/v2";
compatible = "tplink,tl-wr740n-v1", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v3.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr.dtsi"
/ {
model = "TP-Link TL-WR740N v3";
compatible = "tplink,tl-wr740n-v3", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr741-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr.dtsi"
/ {
model = "TP-Link TL-WR741N/ND v1/v2";
compatible = "tplink,tl-wr741-v1", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr743nd-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr.dtsi"
/ {
model = "TP-Link TL-WR743ND v1";
compatible = "tplink,tl-wr743nd-v1", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr841-v5.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr.dtsi"
/ {
model = "TP-Link TL-WR841N/ND v5/v6";
compatible = "tplink,tl-wr841-v5", "qca,ar7240";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr941-v4.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr.dtsi"
/ {
model = "TP-Link TL-WR941N/ND v4";
compatible = "tplink,tl-wr941-v4", "qca,ar7240";
};

96
target/linux/ath79/dts/ar7241.dtsi Normal file
View File

@@ -0,0 +1,96 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar724x.dtsi"
/ {
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&gpio {
ngpios = <20>;
};
&ahb {
usb: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
};
&eth0 {
compatible = "qca,ar7241-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 9>;
reset-names = "mac";
phy-mode = "mii";
phy-handle = <&swphy4>;
};
&mdio1 {
status = "okay";
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar7240sw";
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
qca,mib-poll-interval = <500>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
swphy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
};
};
&eth1 {
status = "okay";
compatible = "qca,ar7241-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 13>;
reset-names = "mac";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};

115
target/linux/ath79/dts/ar7241_tplink.dtsi Normal file
View File

@@ -0,0 +1,115 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
qss {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio_leds: gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
reg = <0x20000 0x3d0000>;
label = "firmware";
};
partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
mtd-mac-address = <&uboot 0x1fc00>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&gpio {
status = "okay";
};
&uart {
status = "okay";
};

19
target/linux/ath79/dts/ar7241_tplink_tl-mr3220-v1.dts Normal file
View File

@@ -0,0 +1,19 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_tplink_tl-mr3x20.dtsi"
/ {
compatible = "tplink,tl-mr3220-v1", "qca,ar7241";
model = "TP-Link TL-MR3220 v1";
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};

19
target/linux/ath79/dts/ar7241_tplink_tl-mr3420-v1.dts Normal file
View File

@@ -0,0 +1,19 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_tplink_tl-mr3x20.dtsi"
/ {
compatible = "tplink,tl-mr3420-v1", "qca,ar7241";
model = "TP-Link TL-MR3420 v1";
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};

40
target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi Normal file
View File

@@ -0,0 +1,40 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7241_tplink.dtsi"
/ {
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
};
};
&gpio_leds {
led3g {
label = "tp-link:green:3g";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};

19
target/linux/ath79/dts/ar7241_tplink_tl-wr841-v7.dts Normal file
View File

@@ -0,0 +1,19 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_tplink.dtsi"
/ {
compatible = "tplink,tl-wr841-v7", "qca,ar7241";
model = "TP-Link TL-WR841N/ND v7";
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};

162
target/linux/ath79/dts/ar7241_tplink_tl-wr842n-v1.dts Normal file
View File

@@ -0,0 +1,162 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
compatible = "tplink,tl-wr842n-v1", "qca,ar7241";
model = "TP-Link TL-WR842N/ND v1";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
led3g {
label = "tp-link:green:3g";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
};
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
reg = <0x20000 0x7d0000>;
label = "firmware";
};
partition@7f0000 {
reg = <0x7f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002e";
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
mtd-mac-address = <&uboot 0x1fc00>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&gpio {
status = "okay";
};
&uart {
status = "okay";
};

38
target/linux/ath79/dts/ar7241_ubnt_airrouter.dts Normal file
View File

@@ -0,0 +1,38 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm.dtsi"
/ {
compatible = "ubnt,airrouter", "ubnt,xm", "qca,ar7241";
model = "Ubiquiti AirRouter";
aliases {
led-boot = &globe;
led-failsafe = &globe;
led-running = &globe;
led-upgrade = &globe;
};
airrouter-leds {
compatible = "gpio-leds";
globe: globe {
label = "ubnt:green:globe";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
power {
label = "ubnt:green:power";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
};
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
};

13
target/linux/ath79/dts/ar7241_ubnt_bullet-m.dts Normal file
View File

@@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm_outdoor.dtsi"
/ {
compatible = "ubnt,bullet-m", "ubnt,xm", "qca,ar7241";
model = "Ubiquiti Bullet M";
};
&eth1 {
compatible = "syscon", "simple-mfd";
};

13
target/linux/ath79/dts/ar7241_ubnt_nanostation-loco-m.dts Normal file
View File

@@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm_outdoor.dtsi"
/ {
compatible = "ubnt,nanostation-loco-m", "ubnt,xm", "qca,ar7241";
model = "Ubiquiti Nanostation Loco M";
};
&eth1 {
compatible = "syscon", "simple-mfd";
};

9
target/linux/ath79/dts/ar7241_ubnt_nanostation-m.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm_outdoor.dtsi"
/ {
compatible = "ubnt,nanostation-m", "ubnt,xm", "qca,ar7241";
model = "Ubiquiti Nanostation M";
};

13
target/linux/ath79/dts/ar7241_ubnt_picostation-m.dts Normal file
View File

@@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm_outdoor.dtsi"
/ {
compatible = "ubnt,picostation-m", "ubnt,xm", "qca,ar7241";
model = "Ubiquiti Picostation M";
};
&eth1 {
compatible = "syscon", "simple-mfd";
};

21
target/linux/ath79/dts/ar7241_ubnt_rocket-m.dts Normal file
View File

@@ -0,0 +1,21 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm_outdoor.dtsi"
/ {
compatible = "ubnt,rocket-m", "ubnt,xm", "qca,ar7241";
model = "Ubiquiti Rocket M";
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
};

127
target/linux/ath79/dts/ar7241_ubnt_unifi.dts Normal file
View File

@@ -0,0 +1,127 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
compatible = "ubnt,unifi", "qca,ar7241";
model = "Ubiquiti UniFi AP";
aliases {
led-boot = &dome_green;
led-failsafe = &dome_green;
led-running = &dome_green;
led-upgrade = &dome_green;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
dome_green: dome-green {
label = "ubnt:green:dome";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
dome-orange {
label = "ubnt:orange:dome";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x750000>;
};
partition@3 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
partition@4 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
art: partition@5 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
compatible = "syscon", "simple-mfd";
};

108
target/linux/ath79/dts/ar7241_ubnt_xm.dtsi Normal file
View File

@@ -0,0 +1,108 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
compatible = "ubnt,xm", "qca,ar7241";
model = "Ubiquiti Networks XM (rev 1.0) board";
/* extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
*/
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&uart {
status = "okay";
};
/*&pll {
clocks = <&extosc>;
};*/
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x750000>;
};
partition@3 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
partition@4 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
art: partition@5 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
};

36
target/linux/ath79/dts/ar7241_ubnt_xm_outdoor.dtsi Normal file
View File

@@ -0,0 +1,36 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241_ubnt_xm.dtsi"
/ {
aliases {
led-boot = &link4;
led-failsafe = &link4;
};
leds {
compatible = "gpio-leds";
link1 {
label = "ubnt:red:link1";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
link2 {
label = "ubnt:orange:link2";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
link3 {
label = "ubnt:green:link3";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
link4: link4 {
label = "ubnt:green:link4";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
};
};

86
target/linux/ath79/dts/ar7242.dtsi Normal file
View File

@@ -0,0 +1,86 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar724x.dtsi"
/ {
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&gpio {
ngpios = <20>;
};
&ahb {
usb: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
};
&mdio0 {
resets = <&rst 22>;
reset-names = "mdio";
};
&eth0 {
compatible = "qca,ar7242-eth", "syscon";
pll-data = <0x16000000 0x00000101 0x00001616>;
pll-reg = <0x4 0x2c 17>;
pll-handle = <&pll>;
resets = <&rst 9>;
reset-names = "mac";
};
&mdio1 {
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar7240sw";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
qca,mib-poll-interval = <500>;
};
};
&eth1 {
compatible = "qca,ar7242-eth", "syscon";
resets = <&rst 13>;
reset-names = "mac";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};

169
target/linux/ath79/dts/ar7242_avm_fritz300e.dts Normal file
View File

@@ -0,0 +1,169 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "avm,fritz300e", "qca,ar7242";
model = "AVM FRITZ!WLAN Repeater 300E";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
power: power {
label = "fritz300e:green:power";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
lan {
label = "fritz300e:green:lan";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wlan {
label = "fritz300e:green:wlan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
ath9k-leds {
compatible = "gpio-leds";
rssi0 {
label = "fritz300e:green:rssi0";
gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
};
rssi1 {
label = "fritz300e:green:rssi1";
gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
};
rssi2 {
label = "fritz300e:green:rssi2";
gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
};
rssi3 {
label = "fritz300e:green:rssi3";
gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
};
rssi4 {
label = "fritz300e:green:rssi4";
gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
};
};
eth-phy-reset {
compatible = "regulator-fixed";
regulator-name = "eth-phy-reset";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
startup-delay-us = <300000>;
enable-active-high;
regulator-always-on;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "urloader";
read-only;
};
partition@20000 {
compatible = "avm,eva-firmware";
reg = <0x20000 0xee0000>;
label = "firmware";
};
partition@f00000 {
reg = <0xf00000 0x80000>;
label = "tffs (1)";
read-only;
};
partition@f80000 {
reg = <0xf80000 0x80000>;
label = "tffs (2)";
read-only;
};
};
};
};
&uart {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy0>;
pll-data = <0x16000000 0x00000101 0x00001313>;
};

17
target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts Normal file
View File

@@ -0,0 +1,17 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7242_buffalo_wzr-bhr.dtsi"
/ {
compatible = "buffalo,bhr-4grv", "qca,ar7242";
model = "Buffalo BHR-4GRV";
};
&eth0 {
mtd-mac-address = <&art 0x0>;
};
&sec_vpn {
label = "buffalo:orange:vpn";
};

170
target/linux/ath79/dts/ar7242_buffalo_wzr-bhr.dtsi Normal file
View File

@@ -0,0 +1,170 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
aliases {
led-boot = &diag;
led-failsafe = &diag;
led-upgrade = &diag;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys: keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
usb {
label = "usb";
linux,code = <BTN_2>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
sec_vpn: sec_vpn {
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
diag: diag {
label = "buffalo:red:diag";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
usb {
label = "buffalo:green:usb";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "buffalo:usb-power";
gpio-export,output = <1>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&flash0 &flash1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x40000>;
label = "u-boot";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "u-boot-env";
};
art: partition@50000 {
reg = <0x50000 0x10000>;
label = "art";
read-only;
};
partition@60000 {
compatible = "denx,uimage";
reg = <0x60000 0x1f80000>;
label = "firmware";
};
partition@1fe0000 {
reg = <0x1fe0000 0x20000>;
label = "user_property";
read-only;
};
};
};
};
&spi {
status = "okay";
cs-gpios = <0>, <0>;
num-cs = <2>;
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
};
flash1: flash@1 {
compatible = "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <25000000>;
};
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
&pll {
clocks = <&extosc>;
};
&uart {
status = "okay";
};
&usb_phy {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};

239
target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g302h-a1a0.dts Normal file
View File

@@ -0,0 +1,239 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "buffalo,wzr-hp-g302h-a1a0", "qca,ar7242";
model = "Buffalo WZR-HP-G302H A1A0";
aliases {
led-boot = &diag;
led-failsafe = &diag;
led-upgrade = &diag;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button_usb {
label = "usb";
linux,code = <BTN_2>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_on {
label = "router_on";
linux,code = <BTN_5>;
linux,input-type = <EV_SW>;
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
movie_engine {
label = "movie_engine";
linux,code = <BTN_3>;
linux,input-type = <EV_SW>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
diag: diag {
label = "buffalo:red:diag";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
usb {
label = "buffalo:blue:usb";
gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
wireless {
label = "buffalo:green:wireless";
gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
security {
label = "buffalo:orange:security";
gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
};
router {
label = "buffalo:green:router";
gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
};
movie_engine_on {
label = "buffalo:blue:movie_engine_on";
gpios = <&ath9k 8 GPIO_ACTIVE_LOW>;
};
movie_engine_off {
label = "buffalo:blue:movie_engine_off";
gpios = <&ath9k 9 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "buffalo:usb-power";
gpio-export,output = <1>;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&flash0 &flash1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x40000>;
label = "u-boot";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "u-boot-env";
};
art: partition@50000 {
reg = <0x50000 0x10000>;
label = "art";
read-only;
};
partition@60000 {
compatible = "denx,uimage";
reg = <0x60000 0x1f60000>;
label = "firmware";
};
partition@1fc0000 {
reg = <0x1fc0000 0x40000>;
label = "user_property";
read-only;
};
};
};
};
&spi {
status = "okay";
cs-gpios = <0>, <0>;
num-cs = <2>;
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
};
flash1: flash@1 {
compatible = "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <25000000>;
};
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
pll-data = <0x1c000000 0x00000101 0x00001616>;
mtd-mac-address = <&art 0x120c>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002a";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0x120c>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&pll {
clocks = <&extosc>;
};
&uart {
status = "okay";
};
&usb_phy {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};

78
target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts Normal file
View File

@@ -0,0 +1,78 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242_buffalo_wzr-bhr.dtsi"
/ {
compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
model = "Buffalo WZR-HP-G450H/WZR-450HP";
ath9k-leds {
compatible = "gpio-leds";
led_movie_engine {
label = "buffalo:blue:movie_engine";
gpios = <&ath9k 13 GPIO_ACTIVE_LOW>;
};
router {
label = "buffalo:green:router";
gpios = <&ath9k 14 GPIO_ACTIVE_LOW>;
};
wireless {
label = "buffalo:green:wireless";
gpios = <&ath9k 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&keys {
movie_engine {
label = "movie_engine";
linux,code = <BTN_6>;
linux,input-type = <EV_SW>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
aoss {
label = "aoss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_off {
label = "router_off";
linux,code = <BTN_5>;
linux,input-type = <EV_SW>;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
&eth0 {
mtd-mac-address = <&art 0x1002>;
};
&sec_vpn {
label = "buffalo:orange:security";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0x1002>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};

180
target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts Normal file
View File

@@ -0,0 +1,180 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
model = "TP-Link TL-WR2543N/ND";
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: wps {
label = "tplink:green:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
usb {
label = "tplink:green:usb";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "tplink:green:wlan2g";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "tplink:green:wlan5g";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
rtl8367 {
compatible = "realtek,rtl8367";
gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x7d0000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
mtd-mac-address = <&uboot 0x1fc00>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
mtd-mac-address = <&uboot 0x1fc00>;
phy-handle = <&phy0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};

162
target/linux/ath79/dts/ar724x.dtsi Normal file
View File

@@ -0,0 +1,162 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar7240";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "console=ttyS0,115200";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
ahb: ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar9132-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar7240-gpio",
"qca,ar7100-gpio";
reg = <0x18040000 0x30>;
interrupts = <2>;
ngpios = <18>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinmux: pinmux@18040028 {
compatible = "pinctrl-single";
reg = <0x18040028 0x8>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <0x0 0x1 0x1>;
};
switch_led_disable_pins: pinmux_switch_led_disable_pins {
pinctrl-single,bits = <0x0 0x0 0xf8>;
};
clks_disable_pins: pinmux_clks_disable_pins {
pinctrl-single,bits = <0x0 0x0 0x81f00>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,ar7240-pll", "syscon";
reg = <0x18050000 0x3c>;
clock-names = "ref";
/* The board must provides the ref clock */
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@1806001c {
compatible = "qca,ar7240-reset",
"qca,ar7100-reset";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
};
pcie: pcie-controller@180c0000 {
compatible = "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x180c0000 0x1000>, /* CRP */
<0x180f0000 0x100>, /* CTRL */
<0x14000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie 0>;
status = "disabled";
};
};
spi: spi@1f000000 {
compatible = "qca,ar7240-spi",
"qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};

197
target/linux/ath79/dts/ar9132.dtsi Normal file
View File

@@ -0,0 +1,197 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar9132";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "console=ttyS0,115200";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
cpuintc: interrupt-controller {
compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};
ahb {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&cpuintc>;
apb {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&miscintc>;
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar9132-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns8250";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar9132-gpio",
"qca,ar7100-gpio";
reg = <0x18040000 0x30>;
interrupts = <2>;
ngpios = <22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pll: pll-controller@18050000 {
compatible = "qca,ar9132-pll",
"qca,ar9130-pll", "syscon";
reg = <0x18050000 0x20>;
clock-names = "ref";
/* The board must provides the ref clock */
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
miscintc: interrupt-controller@18060010 {
compatible = "qca,ar9132-misc-intc",
"qca,ar7100-misc-intc";
reg = <0x18060010 0x8>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
interrupt-controller;
#interrupt-cells = <1>;
};
rst: reset-controller@1806001c {
compatible = "qca,ar9132-reset",
"qca,ar7100-reset";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
};
};
usb: usb@1b000100 {
compatible = "qca,ar7100-ehci", "generic-ehci";
reg = <0x1b000100 0x100>;
interrupts = <3>;
resets = <&rst 5>;
has-transaction-translator;
phy-names = "usb";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar9132-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
wmac: wmac@180c0000 {
compatible = "qca,ar9130-wmac";
reg = <0x180c0000 0x230000>;
interrupts = <2>;
status = "disabled";
};
};
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&eth0 {
compatible = "qca,ar9130-eth", "syscon";
reg = <0x19000000 0x200
0x18070000 0x4>;
pll-data = <0x1a000000 0x13000a44 0x00441099>;
pll-reg = <0x4 0x14 20>;
pll-handle = <&pll>;
resets = <&rst 9>;
reset-names = "mac";
qca,mac-idx = <0>;
};

130
target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts Normal file
View File

@@ -0,0 +1,130 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9132.dtsi"
/ {
compatible = "tplink,tl-wa901nd-v2", "qca,ar9132";
model = "TP-Link TL-WA901ND v2";
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
qss {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: system {
label = "tp-link:green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@1 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3D0000>;
};
art: partition@2 {
label = "art";
reg = <0x3F0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@c {
reg = <0xc>;
phy-mode = "mii";
};
};
&eth0 {
status = "okay";
phy-mode = "mii";
mtd-mac-address = <&uboot 0x1fc00>;
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

155
target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts Normal file
View File

@@ -0,0 +1,155 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9132.dtsi"
/ {
compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
model = "TP-Link TL-WR1043ND v1";
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys";
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button1 {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
usb {
label = "tp-link:green:usb";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
system: system {
label = "tp-link:green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
rtl8366rb {
compatible = "realtek,rtl8366rb";
gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
resets = <&rst 8>;
reset-names = "switch";
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x7D0000>;
};
art: partition@7F0000 {
label = "art";
reg = <0x7F0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
mtd-mac-address = <&uboot 0x1fc00>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

167
target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts Normal file
View File

@@ -0,0 +1,167 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9132.dtsi"
/ {
compatible = "tplink,tl-wr941-v2", "qca,ar9132";
model = "TP-Link TL-WR941N/ND v2/v3";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys";
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button1 {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
qss_r {
label = "tp-link:red:qss";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
qss_g {
label = "tp-link:green:qss";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
dsa {
compatible = "marvell,dsa";
#address-cells = <1>;
#size-cells = <0>;
dsa,mii-bus = <&mdio0>;
dsa,ethernet = <&eth0>;
switch@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
port@0 {
reg = <0>;
label = "wan";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@5 {
reg = <5>;
label = "cpu";
};
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x20000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
};
&eth0 {
status = "okay";
phy-mode = "rmii";
mtd-mac-address = <&uboot 0x1fc00>;
fixed-link {
speed = <100>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

215
target/linux/ath79/dts/ar9330.dtsi Normal file
View File

@@ -0,0 +1,215 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar9330";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
chosen {
bootargs = "console=ttyATH0,115200";
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar7240-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "qca,ar9330-uart";
reg = <0x18020000 0x14>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_REF>;
clock-names = "uart";
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar7100-gpio";
reg = <0x18040000 0x34>;
interrupts = <2>;
ngpios = <30>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinmux: pinmux@18040028 {
compatible = "pinctrl-single";
reg = <0x18040028 0x8>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <0x0 0x1 0x1>;
};
switch_led_disable_pins: pinmux_switch_led_disable_pins {
pinctrl-single,bits = <0x0 0x0 0xf8>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,ar9330-pll";
reg = <0x18050000 0x100>;
#clock-cells = <1>;
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@1806001c {
compatible = "qca,ar7100-reset";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
};
};
usb: usb@1b000000 {
compatible = "chipidea,usb2";
reg = <0x1b000000 0x200>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gmac: gmac@18070000 {
compatible = "qca,ar9330-gmac";
reg = <0x18070000 0x4>;
};
wmac: wmac@18100000 {
compatible = "qca,ar9330-wmac";
reg = <0x18100000 0x20000>;
interrupts = <2>;
status = "disabled";
};
};
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
};
&eth0 {
compatible = "qca,ar9330-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 9>;
reset-names = "mac";
phy-mode = "mii";
phy-handle = <&swphy4>;
};
&mdio1 {
status = "okay";
compatible = "qca,ar9330-mdio";
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar7240sw";
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
qca,mib-poll-interval = <500>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
swphy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
};
};
&eth1 {
compatible = "qca,ar9330-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
phy-mode = "gmii";
resets = <&rst 13>;
reset-names = "mac";
fixed-link {
speed = <1000>;
full-duplex;
};
};

143
target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts Normal file
View File

@@ -0,0 +1,143 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9330.dtsi"
/ {
model = "GL.iNet GL-AR150";
compatible = "glinet,gl-ar150", "qca,ar9330";
aliases {
serial0 = &uart;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
wlan {
label = "gl-ar150:orange:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
configurable {
label = "gl-ar150:green:configurable";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
led_power: power {
label = "gl-ar150:green:power";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
manual {
label = "manual";
linux,code = <BTN_7>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
auto {
label = "auto";
linux,code = <BTN_8>;
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0xfa0000>;
};
art: partition@3 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x0>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x0>;
};

142
target/linux/ath79/dts/ar9330_pqi_air-pen.dts Normal file
View File

@@ -0,0 +1,142 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9330.dtsi"
/ {
model = "PQI Air-Pen";
compatible = "pqi,air-pen", "qca,ar9330";
aliases {
serial0 = &uart;
led-boot = &wlan;
led-failsafe = &wlan;
led-upgrade = &wlan;
};
leds {
compatible = "gpio-leds";
wlan: wlan {
label = "air-pen:blue:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wps {
label = "air-pen:blue:wps";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
art: partition@50000 {
label = "art";
reg = <0x050000 0x010000>;
read-only;
};
partition@60000 {
label = "NVRAM";
reg = <0x060000 0x010000>;
read-only;
};
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x070000 0x780000>;
};
partition@7f0000 {
label = "CONF";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x1002>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x2>;
};

11
target/linux/ath79/dts/ar9331.dtsi Normal file
View File

@@ -0,0 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9330.dtsi"
/ {
compatible = "qca,ar9331";
ref: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};

131
target/linux/ath79/dts/ar9331_8dev_carambola2.dts Normal file
View File

@@ -0,0 +1,131 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "8devices Carambola2";
compatible = "8dev,carambola2", "qca,ar9331";
aliases {
serial0 = &uart;
};
leds {
compatible = "gpio-leds";
wlan {
label = "carambola2:green:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
eth0 {
label = "carambola2:orange:eth0";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
eth1 {
label = "carambola2:orange:eth1";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <0>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfa0000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

117
target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts Normal file
View File

@@ -0,0 +1,117 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "Embedded Wireless Dorin";
compatible = "embeddedwireless,dorin", "qca,ar9331";
aliases {
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
serial0 = &uart;
};
leds {
compatible = "gpio-leds";
status: status {
label = "dorin:green:status";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0xfa0000>;
};
art: partition@3 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x1002>;
mtd-mac-address-increment-byte = <3>;
mtd-mac-address-increment = <0x40>;
};
&mdio1 {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

125
target/linux/ath79/dts/ar9331_etactica_eg200.dts Normal file
View File

@@ -0,0 +1,125 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "eTactica EG200";
compatible = "etactica,eg200", "qca,ar9331";
aliases {
serial0 = &uart;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <50>;
restore {
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_disable_pins>;
modbus {
label = "eg200:red:modbus";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
etactica {
label = "eg200:red:etactica";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
eth0 {
label = "eg200:red:eth0";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
wlan {
label = "eg200:red:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot@0 {
reg = <0x0 0x40000>;
read-only;
};
uboot-env@40000 {
reg = <0x40000 0x10000>;
read-only;
};
firmware@50000 {
compatible = "denx,uimage";
reg = <0x50000 0xfa0000>;
};
art: art@ff0000 {
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

123
target/linux/ath79/dts/ar9331_pisen_wmm003n.dts Normal file
View File

@@ -0,0 +1,123 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "Pisen WMM003N";
compatible = "pisen,wmm003n", "qca,ar9331";
aliases {
serial0 = &uart;
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "pisen:blue:system";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
compatible = "tplink,firmware";
reg = <0x20000 0x7d0000>;
label = "firmware";
};
art: partition@7f0000 {
reg = <0x7f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

13
target/linux/ath79/dts/ar9331_tplink_tl-mr10u.dts Normal file
View File

@@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr703n_tl-mr10u.dtsi"
/ {
model = "TP-Link TL-MR10U";
compatible = "tplink,tl-mr10u", "qca,ar9331";
};
&reg_usb_vbus {
gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
};

174
target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts Normal file
View File

@@ -0,0 +1,174 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "TP-Link TL-MR3020 V1";
compatible = "tplink,tl-mr3020-v1", "qca,ar9331";
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
lan {
label = "tp-link:green:lan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
system: wps {
label = "tp-link:green:wps";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
led3g {
label = "tp-link:green:3g";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
keys {
compatible = "gpio-keys";
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
button1 {
label = "sw1";
linux,input-type = <EV_SW>;
linux,code = <BTN_0>;
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
button2 {
label = "sw2";
linux,input-type = <EV_SW>;
linux,code = <BTN_1>;
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
/* Spansion S25FL032PIF SPI flash */
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3c0000>;
};
partition@3e0000 {
label = "config";
reg = <0x3e0000 0x010000>;
read-only;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

162
target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts Normal file
View File

@@ -0,0 +1,162 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "TP-Link TL-MR3040 V2";
compatible = "tplink,tl-mr3040-v2", "qca,ar9331";
aliases {
serial0 = &uart;
led-boot = &led_lan;
led-failsafe = &led_lan;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_disable_pins>;
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_lan: lan {
label = "tp-link:green:lan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
led3g {
label = "tp-link:green:3g";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
sw1 {
label = "sw1";
linux,input-type = <EV_SW>;
linux,code = <BTN_0>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
sw2 {
label = "sw2";
linux,input-type = <EV_SW>;
linux,code = <BTN_1>;
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

13
target/linux/ath79/dts/ar9331_tplink_tl-wr703n.dts Normal file
View File

@@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr703n_tl-mr10u.dtsi"
/ {
model = "TP-Link TL-WR703N";
compatible = "tplink,tl-wr703n", "qca,ar9331";
};
&reg_usb_vbus {
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
};

120
target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi Normal file
View File

@@ -0,0 +1,120 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: system {
label = "tl-wr703n:blue:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
compatible = "tplink,firmware";
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

39
target/linux/ath79/dts/ar9331_tplink_tl-wr710n-8m.dtsi Normal file
View File

@@ -0,0 +1,39 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9331_tplink_tl-wr710n.dtsi"
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
reg = <0x20000 0x7d0000>;
label = "firmware";
};
art: partition@7f0000 {
reg = <0x7f0000 0x10000>;
label = "art";
read-only;
};
};
};
};

9
target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr710n-8m.dtsi"
/ {
model = "TP-Link TL-WR710N v1";
compatible = "tplink,tl-wr710n-v1", "qca,ar9331";
};

9
target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v2.1.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr710n-8m.dtsi"
/ {
model = "TP-Link TL-WR710N v2.1";
compatible = "tplink,tl-wr710n-v2.1", "qca,ar9331";
};

92
target/linux/ath79/dts/ar9331_tplink_tl-wr710n.dtsi Normal file
View File

@@ -0,0 +1,92 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
aliases {
serial0 = &uart;
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "tl-wr710n:green:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
reg_usb_vbus: regulator {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&gpio {
status = "okay";
};
&uart {
status = "okay";
};
&usb {
status = "okay";
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

9
target/linux/ath79/dts/ar9331_tplink_tl-wr740n-v4.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
/ {
model = "TP-Link TL-WR740N v4";
compatible = "tplink,tl-wr740n-v4", "qca,ar9331";
};

9
target/linux/ath79/dts/ar9331_tplink_tl-wr740n-v5.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
/ {
model = "TP-Link TL-WR740N v5";
compatible = "tplink,tl-wr740n-v5", "qca,ar9331";
};

9
target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dts Normal file
View File

@@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
/ {
model = "TP-Link TL-WR741N/ND v4";
compatible = "tplink,tl-wr741nd-v4", "qca,ar9331";
};

152
target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi Normal file
View File

@@ -0,0 +1,152 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
model = "TP-Link TL-WR741N/ND v4";
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_disable_pins>;
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
system: system {
label = "tp-link:green:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
compatible = "tplink,firmware";
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&uart {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

26
target/linux/ath79/dts/ar9341.dtsi Normal file
View File

@@ -0,0 +1,26 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar934x.dtsi"
/ {
compatible = "qca,ar9341";
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};
&wmac {
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
&eth0 {
phy-mode = "mii";
};
&eth1 {
status = "okay";
};

166
target/linux/ath79/dts/ar9341_pcs_cr3000.dts Normal file
View File

@@ -0,0 +1,166 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
model = "PowerCloud Systems CR3000";
compatible = "pcs,cr3000", "qca,ar9341";
aliases {
serial0 = &uart;
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
status: power {
label = "pcs:amber:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "pcs:blue:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan {
label = "pcs:blue:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "pcs:blue:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "pcs:blue:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "pcs:blue:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "pcs:blue:lan4";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x07a0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
};
&eth1 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&art 0x0>;
phy-mode = "gmii";
pll-data = <0x06000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};

194
target/linux/ath79/dts/ar9341_tplink_tl-mr3420-v2.dts Normal file
View File

@@ -0,0 +1,194 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
model = "TP-Link TL-MR3420 v2";
compatible = "tplink,tl-mr3420-v2", "qca,ar9341";
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: power {
label = "tp-link:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
usb {
label = "tp-link:green:usb";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>;
usb_power {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "tp-link:power:usb";
};
};
&pinmux {
pmx_usb_power: usb_power {
pinctrl-single,bits = <0x4 0x0 0xff>;
};
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};

81
target/linux/ath79/dts/ar9341_tplink_tl-wa.dtsi Normal file
View File

@@ -0,0 +1,81 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
aliases {
serial0 = &uart;
};
};
&ref {
clock-frequency = <25000000>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

79
target/linux/ath79/dts/ar9341_tplink_tl-wa850re-v1.dts Normal file
View File

@@ -0,0 +1,79 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9341_tplink_tl-wa.dtsi"
/ {
model = "TP-Link TL-WA850RE v1";
compatible = "tplink,tl-wa850re-v1", "qca,ar9341";
aliases {
led-boot = &led_re;
led-failsafe = &led_re;
led-running = &led_re;
led-upgrade = &led_re;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
lan {
label = "tp-link:blue:lan";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
wlan {
label = "tp-link:blue:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_re: re {
label = "tp-link:blue:re";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
signal1 {
label = "tp-link:blue:signal1";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
signal2 {
label = "tp-link:blue:signal2";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
signal3 {
label = "tp-link:blue:signal3";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
signal4 {
label = "tp-link:blue:signal4";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
signal5 {
label = "tp-link:blue:signal5";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
};

72
target/linux/ath79/dts/ar9341_tplink_tl-wa860re-v1.dts Normal file
View File

@@ -0,0 +1,72 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9341_tplink_tl-wa.dtsi"
/ {
model = "TP-Link TL-WA860RE v1";
compatible = "tplink,tl-wa860re-v1", "qca,ar9341";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_orange;
led-running = &led_power_green;
led-upgrade = &led_power_orange;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
onoff {
label = "ONOFF";
linux,code = <BTN_1>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
lan {
label = "tp-link:green:lan";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
led_power_green: power_green {
label = "tp-link:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_power_orange: power_orange {
label = "tp-link:orange:power";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
wlan_green {
label = "tp-link:green:wlan";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan_orange {
label = "tp-link:orange:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
};

169
target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts Normal file
View File

@@ -0,0 +1,169 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
model = "TP-Link TL-WR841N/ND v8";
compatible = "tplink,tl-wr841-v8", "qca,ar9341";
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: power {
label = "tp-link:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>;
};
&pinmux {
pmx_usb_power: usb_power {
pinctrl-single,bits = <0x4 0x0 0xff>;
};
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
pll-data = <0x06000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

201
target/linux/ath79/dts/ar9341_tplink_tl-wr842n-v2.dts Normal file
View File

@@ -0,0 +1,201 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
model = "TP-Link TL-WR842N/ND v2";
compatible = "tplink,tl-wr842n-v2", "qca,ar9341";
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: power {
label = "tp-link:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
usb {
label = "tp-link:green:usb";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>;
};
&pinmux {
pmx_usb_power: usb_power {
pinctrl-single,bits = <0x4 0x0 0xff>;
};
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x7d0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&uboot 0x1fc00>;
phy-mode = "gmii";
pll-data = <0x06000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

141
target/linux/ath79/dts/ar9342_iodata_etg3-r.dts Normal file
View File

@@ -0,0 +1,141 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
compatible = "iodata,etg3-r", "qca,ar9344";
model = "I-O DATA ETG3-R";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
power: power {
label = "etg3-r:green:power";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "on";
};
notification {
label = "etg3-r:green:notification";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x780000>;
};
partition@7d0000 {
label = "Config";
reg = <0x07d0000 0x10000>;
read-only;
};
partition@7e0000 {
label = "Rsv";
reg = <0x07e0000 0x10000>;
read-only;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x50 0xffb7ffb7 /* LED_CTRL0 */
0x54 0xffb7ffb7 /* LED_CTRL1 */
0x58 0xffb7ffb7 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x0e000000 0x00000101 0x00001616>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
rxd-delay = <3>;
rxdv-delay = <3>;
};
};
&uart {
status = "okay";
};

35
target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts Normal file
View File

@@ -0,0 +1,35 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9342_ubnt_xw.dtsi"
/ {
compatible = "ubnt,bullet-m-xw", "ubnt,xw", "qca,ar9342";
model = "Ubiquiti Bullet M (XW)";
};
&mdio0 {
status = "okay";
phy-mask = <4>;
phy4: ethernet-phy@4 {
phy-mode = "rgmii";
reg = <4>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy4>;
gmac-config {
device = <&gmac>;
rxd-delay = <3>;
rxdv-delay = <3>;
};
};

43
target/linux/ath79/dts/ar9342_ubnt_lap-120.dts Normal file
View File

@@ -0,0 +1,43 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "ar9342_ubnt_wa.dtsi"
/ {
compatible = "ubnt,lap-120", "ubnt,wa", "qca,ar9342";
model = "Ubiquiti LiteAP ac (LAP-120)";
};
&mdio0 {
status = "okay";
phy-mask = <4>;
phy4: ethernet-phy@4 {
phy-mode = "rgmii";
reg = <4>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
mtd-mac-address = <&eeprom 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy4>;
gmac-config {
device = <&gmac>;
rxd-delay = <3>;
rxdv-delay = <3>;
};
};
&wmac {
status = "disabled";
};

70
target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts Normal file
View File

@@ -0,0 +1,70 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9342_ubnt_wa.dtsi"
/ {
compatible = "ubnt,nanobeam-ac", "ubnt,wa", "qca,ar9342";
model = "Ubiquiti NanoBeam AC (WA)";
aliases {
led-boot = &led_rssi3;
led-failsafe = &led_rssi3;
led-upgrade = &led_rssi3;
};
leds {
compatible = "gpio-leds";
rssi0 {
label = "ubnt:blue:rssi0";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
rssi1 {
label = "ubnt:blue:rssi1";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
rssi2 {
label = "ubnt:blue:rssi2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_rssi3: rssi3 {
label = "ubnt:blue:rssi3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
};
&mdio0 {
status = "okay";
phy-mask = <4>;
phy4: ethernet-phy@4 {
phy-mode = "rgmii";
reg = <4>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
mtd-mac-address = <&eeprom 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy4>;
gmac-config {
device = <&gmac>;
rxd-delay = <3>;
rxdv-delay = <3>;
};
};

40
target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts Normal file
View File

@@ -0,0 +1,40 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9342_ubnt_wa.dtsi"
/ {
compatible = "ubnt,nanostation-ac-loco", "ubnt,wa", "qca,ar9342";
model = "Ubiquiti Nanostation AC loco (WA)";
};
&mdio0 {
status = "okay";
phy-mask = <4>;
phy4: ethernet-phy@4 {
phy-mode = "rgmii";
reg = <4>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
mtd-mac-address = <&eeprom 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy4>;
gmac-config {
device = <&gmac>;
rxd-delay = <3>;
rxdv-delay = <3>;
};
};

84
target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts Normal file
View File

@@ -0,0 +1,84 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9342_ubnt_wa.dtsi"
/ {
compatible = "ubnt,nanostation-ac","ubnt,wa", "qca,ar9342";
model = "Ubiquiti Nanostation AC (WA)";
aliases {
led-boot = &led_rssi3;
led-failsafe = &led_rssi3;
led-upgrade = &led_rssi3;
};
leds {
compatible = "gpio-leds";
rssi0 {
label = "ubnt:blue:rssi0";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
rssi1 {
label = "ubnt:blue:rssi1";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
rssi2 {
label = "ubnt:blue:rssi2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_rssi3: rssi3 {
label = "ubnt:blue:rssi3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
};
&mdio0 {
status = "okay";
phy-mask = <4>;
phy0: ethernet-phy@0 {
phy-mode = "rgmii";
reg = <0>;
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x58 0xffb7ffb7 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
mtd-mac-address = <&eeprom 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rxd-delay = <2>;
rxdv-delay = <2>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&eeprom 0x1000>;
mtd-mac-address = <&eeprom 0x1002>;
};

30
target/linux/ath79/dts/ar9342_ubnt_nanostation-loco-m-xw.dts Normal file
View File

@@ -0,0 +1,30 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9342_ubnt_xw.dtsi"
/ {
compatible = "ubnt,nanostation-loco-m-xw", "ubnt,xw", "qca,ar9342";
model = "Ubiquiti Nanostation Loco M (XW)";
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy1: ethernet-phy@1 {
reg = <1>;
phy-mode = "mii";
reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
&eth0 {
status = "okay";
phy-handle = <&phy1>;
};

37
target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts Normal file
View File

@@ -0,0 +1,37 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9342_ubnt_xw.dtsi"
/ {
compatible = "ubnt,nanostation-m-xw", "ubnt,xw", "qca,ar9342";
model = "Ubiquiti Nanostation M (XW)";
};
&mdio0 {
status = "okay";
phy4-mii-enable;
phy-mask = <0x23>;
phy4: ethernet-phy@0 {
reg = <0>;
phy-mode = "mii";
};
};
&eth0 {
status = "okay";
phy-mode = "mii";
phy-handle = <&phy4>;
gmac-config {
device = <&gmac>;
mii-gmac0 = <1>;
mii-gmac0-slave = <1>;
};
};

93
target/linux/ath79/dts/ar9342_ubnt_wa.dtsi Normal file
View File

@@ -0,0 +1,93 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
compatible = "ubnt,wa", "qca,ar9342";
model = "Ubiquiti Networks WA board";
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&pcie {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0xf60000>;
};
partition@fb0000 {
label = "cfg";
reg = <0xfb0000 0x040000>;
read-only;
};
eeprom: partition@ff0000 {
label = "EEPROM";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
qca,disable-5ghz;
mtd-cal-data = <&eeprom 0x1000>;
mtd-mac-address = <&eeprom 0x1002>;
};

123
target/linux/ath79/dts/ar9342_ubnt_xw.dtsi Normal file
View File

@@ -0,0 +1,123 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
compatible = "ubnt,xw", "qca,ar9342";
model = "Ubiquiti Networks XW board";
aliases {
led-boot = &system;
led-running = &system;
led-upgrade = &system;
led-failsafe = &system;
};
leds {
compatible = "gpio-leds";
link1 {
label = "ubnt:red:link1";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
link2 {
label = "ubnt:orange:link2";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
link3 {
label = "ubnt:green:link3";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
system: link4 {
label = "ubnt:green:link4";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x760000>;
};
partition@7b0000 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
eeprom: partition@7f0000 {
label = "EEPROM";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&eeprom 0x1000>;
mtd-mac-address = <&eeprom 0x1002>;
};
&eth0 {
mtd-mac-address = <&eeprom 0x0>;
};

62
target/linux/ath79/dts/ar9344.dtsi Normal file
View File

@@ -0,0 +1,62 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar934x.dtsi"
/ {
compatible = "qca,ar9344";
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 2>, <&ddr_ctrl 0>,
<&ddr_ctrl 1>;
};
&rst {
intc2: interrupt-controller {
compatible = "qca,ar9340-intc";
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
qca,int-status-addr = <0xac>;
qca,pending-bits = <0xf>, /* wmac */
<0x1f0>; /* pcie rc1 */
qca,ddr-wb-channel-interrupts = <0>, <1>;
qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 3>;
};
};
&ahb {
pcie: pcie-controller@180c0000 {
compatible = "qcom,ar9340-pci", "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x180c0000 0x1000>, /* CRP */
<0x180f0000 0x100>, /* CTRL */
<0x14000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc2>;
interrupts = <1>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie 0>;
status = "disabled";
};
};
&wmac {
interrupt-parent = <&intc2>;
interrupts = <0>;
};

Some files were not shown because too many files have changed in this diff Show More