Initial commit

target/linux/ath79/dts/ar9331_etactica_eg200.dts

@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "eTactica EG200";
+	compatible = "etactica,eg200", "qca,ar9331";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <50>;
+
+		restore {
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&switch_led_disable_pins>;
+
+		modbus {
+			label = "eg200:red:modbus";
+			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		etactica {
+			label = "eg200:red:etactica";
+			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		eth0 {
+			label = "eg200:red:eth0";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "eg200:red:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	mtd-mac-address = <&art 0x0>;
+
+	gmac-config {
+		device = <&gmac>;
+		switch-phy-addr-swap = <1>;
+		switch-phy-swap = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	compatible = "syscon", "simple-mfd";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot@0 {
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			uboot-env@40000 {
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			firmware@50000 {
+				compatible = "denx,uimage";
+				reg = <0x50000 0xfa0000>;
+			};
+
+			art: art@ff0000 {
+				reg = <0xff0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&art 0x1002>;
+};