Initial commit

target/linux/ath79/dts/ar9342_ubnt_xw.dtsi

@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+	compatible = "ubnt,xw", "qca,ar9342";
+	model = "Ubiquiti Networks XW board";
+
+	aliases {
+		led-boot = &system;
+		led-running = &system;
+		led-upgrade = &system;
+		led-failsafe = &system;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		link1 {
+			label = "ubnt:red:link1";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		link2 {
+			label = "ubnt:orange:link2";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		link3 {
+			label = "ubnt:green:link3";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		system: link4 {
+			label = "ubnt:green:link4";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <40000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x050000 0x760000>;
+			};
+
+			partition@7b0000 {
+				label = "cfg";
+				reg = <0x7b0000 0x040000>;
+				read-only;
+			};
+
+			eeprom: partition@7f0000 {
+				label = "EEPROM";
+				reg = <0x7f0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&eeprom 0x1000>;
+	mtd-mac-address = <&eeprom 0x1002>;
+};
+
+&eth0 {
+	mtd-mac-address = <&eeprom 0x0>;
+};