Initial commit
This commit is contained in:
domenico
68
target/linux/ipq40xx/base-files/etc/board.d/01_leds
Executable file
68
target/linux/ipq40xx/base-files/etc/board.d/01_leds
Executable file
@@ -0,0 +1,68 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
boardname="${board##*,}"
|
||||
|
||||
case "$board" in
|
||||
alfa-network,ap120c-ac)
|
||||
ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1"
|
||||
;;
|
||||
asus,rt-ac58u)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2G" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5G" "phy1tpt"
|
||||
ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
|
||||
ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e"
|
||||
;;
|
||||
avm,fritzbox-4040)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
|
||||
ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
|
||||
ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
|
||||
;;
|
||||
avm,fritzbox-7530 |\
|
||||
glinet,gl-b1300)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt"
|
||||
;;
|
||||
engenius,eap1300)
|
||||
ucidef_set_led_netdev "lan" "LAN" "${boardname}:blue:lan" "eth0"
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:yellow:wlan5g" "phy1tpt"
|
||||
ucidef_set_led_default "mesh" "MESH" "${boardname}:blue:mesh" "0"
|
||||
;;
|
||||
engenius,ens620ext)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt"
|
||||
ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:green:lan1" "eth0"
|
||||
ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:green:lan2" "eth1"
|
||||
;;
|
||||
netgear,ex6100v2 |\
|
||||
netgear,ex6150v2)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "ex61x0v2:green:router" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "ex61x0v2:green:client" "phy1tpt"
|
||||
;;
|
||||
qxwlan,e2600ac-c1 |\
|
||||
qxwlan,e2600ac-c2)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN0" "e2600ac:green:wlan0" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN1" "e2600ac:green:wlan1" "phy1tpt"
|
||||
;;
|
||||
zyxel,nbg6617)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt"
|
||||
;;
|
||||
zyxel,wre6606)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy1tpt"
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
101
target/linux/ipq40xx/base-files/etc/board.d/02_network
Executable file
101
target/linux/ipq40xx/base-files/etc/board.d/02_network
Executable file
@@ -0,0 +1,101 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
|
||||
# Copyright (c) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
ipq40xx_setup_interfaces()
|
||||
{
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
8dev,jalapeno|\
|
||||
alfa-network,ap120c-ac|\
|
||||
engenius,ens620ext)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
;;
|
||||
asus,map-ac2200|\
|
||||
openmesh,a42|\
|
||||
openmesh,a62)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
asus,rt-ac58u|\
|
||||
zyxel,nbg6617)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
|
||||
;;
|
||||
avm,fritzbox-4040|\
|
||||
linksys,ea6350v3|\
|
||||
linksys,ea8300)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
|
||||
;;
|
||||
avm,fritzbox-7530)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
|
||||
;;
|
||||
avm,fritzrepeater-1200|\
|
||||
engenius,eap1300|\
|
||||
meraki,mr33|\
|
||||
netgear,ex6100v2|\
|
||||
netgear,ex6150v2|\
|
||||
zyxel,wre6606)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
avm,fritzrepeater-3000|\
|
||||
compex,wpj428)
|
||||
ucidef_set_interface_lan "eth0 eth1"
|
||||
;;
|
||||
glinet,gl-b1300)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0u@eth0" "3:lan" "4:lan"
|
||||
;;
|
||||
qxwlan,e2600ac-c1 |\
|
||||
qxwlan,e2600ac-c2)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
|
||||
;;
|
||||
*)
|
||||
echo "Unsupported hardware. Network interfaces not initialized"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
ipq40xx_setup_macs()
|
||||
{
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
asus,rt-ac58u)
|
||||
CI_UBIPART=UBI_DEV
|
||||
wan_mac=$(mtd_get_mac_binary_ubi Factory 20486)
|
||||
lan_mac=$(mtd_get_mac_binary_ubi Factory 4102)
|
||||
;;
|
||||
engenius,ens620ext)
|
||||
wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
;;
|
||||
linksys,ea6350v3)
|
||||
wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
;;
|
||||
esac
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
|
||||
}
|
||||
|
||||
board_config_update
|
||||
board=$(board_name)
|
||||
ipq40xx_setup_interfaces $board
|
||||
ipq40xx_setup_macs $board
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
17
target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
Executable file
17
target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
Executable file
@@ -0,0 +1,17 @@
|
||||
#!/bin/sh
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
compex,wpj428)
|
||||
ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,258 @@
|
||||
#!/bin/sh
|
||||
|
||||
# xor multiple hex values of the same length
|
||||
xor() {
|
||||
local val
|
||||
local ret="0x$1"
|
||||
local retlen=${#1}
|
||||
|
||||
shift
|
||||
while [ -n "$1" ]; do
|
||||
val="0x$1"
|
||||
ret=$((ret ^ val))
|
||||
shift
|
||||
done
|
||||
|
||||
printf "%0${retlen}x" "$ret"
|
||||
}
|
||||
|
||||
ath10kcal_die() {
|
||||
echo "ath10cal: " "$*"
|
||||
exit 1
|
||||
}
|
||||
|
||||
ath10kcal_extract() {
|
||||
local part=$1
|
||||
local offset=$2
|
||||
local count=$3
|
||||
local mtd
|
||||
|
||||
mtd=$(find_mtd_chardev $part)
|
||||
[ -n "$mtd" ] || \
|
||||
ath10kcal_die "no mtd device found for partition $part"
|
||||
|
||||
dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
|
||||
ath10kcal_die "failed to extract calibration data from $mtd"
|
||||
}
|
||||
|
||||
ath10kcal_ubi_extract() {
|
||||
local part=$1
|
||||
local offset=$2
|
||||
local count=$3
|
||||
local ubidev
|
||||
local ubi
|
||||
|
||||
. /lib/upgrade/nand.sh
|
||||
|
||||
ubidev=$(nand_find_ubi $CI_UBIPART)
|
||||
ubi=$(nand_find_volume $ubidev $part)
|
||||
[ -n "$ubi" ] || \
|
||||
ath10kcal_die "no UBI volume found for $part"
|
||||
|
||||
dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
|
||||
ath10kcal_die "failed to extract from $ubi"
|
||||
}
|
||||
|
||||
ath10kcal_patch_mac_crc() {
|
||||
local mac=$1
|
||||
local mac_offset=6
|
||||
local chksum_offset=2
|
||||
local xor_mac
|
||||
local xor_fw_mac
|
||||
local xor_fw_chksum
|
||||
|
||||
[ -z "$mac" ] && return
|
||||
|
||||
xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
|
||||
xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
|
||||
|
||||
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
|
||||
|
||||
xor_mac=${mac//:/}
|
||||
xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
|
||||
|
||||
xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
|
||||
xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
|
||||
|
||||
printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
|
||||
dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
|
||||
}
|
||||
|
||||
ath10kcal_is_caldata_valid() {
|
||||
local expected="$1"
|
||||
|
||||
magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
|
||||
[[ "$magic" == "$expected" ]]
|
||||
return $?
|
||||
}
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:01:00.0.bin")
|
||||
case "$board" in
|
||||
meraki,mr33)
|
||||
ath10kcal_ubi_extract "ART" 36864 2116
|
||||
ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
|
||||
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/pre-cal-pci-0000:01:00.0.bin")
|
||||
case "$board" in
|
||||
asus,map-ac2200)
|
||||
ath10kcal_ubi_extract "Factory" 36864 12064
|
||||
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
|
||||
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
|
||||
;;
|
||||
avm,fritzrepeater-3000)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
|
||||
;;
|
||||
linksys,ea8300)
|
||||
ath10kcal_extract "ART" 36864 12064
|
||||
# OEM assigns 4 sequential MACs
|
||||
ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
|
||||
;;
|
||||
openmesh,a62)
|
||||
ath10kcal_extract "0:ART" 36864 12064
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/pre-cal-ahb-a000000.wifi.bin")
|
||||
case "$board" in
|
||||
8dev,jalapeno |\
|
||||
alfa-network,ap120c-ac |\
|
||||
glinet,gl-b1300 |\
|
||||
linksys,ea6350v3 |\
|
||||
qcom,ap-dk01.1-c1)
|
||||
ath10kcal_extract "ART" 4096 12064
|
||||
;;
|
||||
asus,map-ac2200)
|
||||
ath10kcal_ubi_extract "Factory" 4096 12064
|
||||
;;
|
||||
asus,rt-ac58u)
|
||||
CI_UBIPART=UBI_DEV
|
||||
ath10kcal_ubi_extract "Factory" 4096 12064
|
||||
;;
|
||||
avm,fritzbox-4040)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
|
||||
;;
|
||||
avm,fritzbox-7530 |\
|
||||
avm,fritzrepeater-1200 |\
|
||||
avm,fritzrepeater-3000)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
|
||||
;;
|
||||
compex,wpj428 |\
|
||||
engenius,eap1300 |\
|
||||
openmesh,a42 |\
|
||||
openmesh,a62 |\
|
||||
qxwlan,e2600ac-c1 |\
|
||||
qxwlan,e2600ac-c2)
|
||||
ath10kcal_extract "0:ART" 4096 12064
|
||||
;;
|
||||
engenius,ens620ext)
|
||||
ath10kcal_extract "ART" 4096 12064
|
||||
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
|
||||
;;
|
||||
linksys,ea8300)
|
||||
ath10kcal_extract "ART" 4096 12064
|
||||
ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
|
||||
;;
|
||||
meraki,mr33)
|
||||
ath10kcal_ubi_extract "ART" 4096 12064
|
||||
ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
|
||||
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +2)
|
||||
;;
|
||||
netgear,ex6100v2 |\
|
||||
netgear,ex6150v2)
|
||||
ath10kcal_extract "ART" 4096 12064
|
||||
ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0)
|
||||
;;
|
||||
zyxel,nbg6617 |\
|
||||
zyxel,wre6606)
|
||||
ath10kcal_extract "ART" 4096 12064
|
||||
ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/pre-cal-ahb-a800000.wifi.bin")
|
||||
case "$board" in
|
||||
8dev,jalapeno |\
|
||||
alfa-network,ap120c-ac |\
|
||||
glinet,gl-b1300 |\
|
||||
linksys,ea6350v3 |\
|
||||
qcom,ap-dk01.1-c1)
|
||||
ath10kcal_extract "ART" 20480 12064
|
||||
;;
|
||||
asus,map-ac2200)
|
||||
ath10kcal_ubi_extract "Factory" 20480 12064
|
||||
;;
|
||||
asus,rt-ac58u)
|
||||
CI_UBIPART=UBI_DEV
|
||||
ath10kcal_ubi_extract "Factory" 20480 12064
|
||||
;;
|
||||
avm,fritzbox-4040)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
|
||||
;;
|
||||
avm,fritzbox-7530 |\
|
||||
avm,fritzrepeater-1200 |\
|
||||
avm,fritzrepeater-3000)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
|
||||
;;
|
||||
compex,wpj428 |\
|
||||
engenius,eap1300 |\
|
||||
openmesh,a42 |\
|
||||
openmesh,a62 |\
|
||||
qxwlan,e2600ac-c1 |\
|
||||
qxwlan,e2600ac-c2)
|
||||
ath10kcal_extract "0:ART" 20480 12064
|
||||
;;
|
||||
engenius,ens620ext)
|
||||
ath10kcal_extract "ART" 20480 12064
|
||||
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
|
||||
;;
|
||||
linksys,ea8300)
|
||||
ath10kcal_extract "ART" 20480 12064
|
||||
ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
|
||||
;;
|
||||
meraki,mr33)
|
||||
ath10kcal_ubi_extract "ART" 20480 12064
|
||||
ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
|
||||
ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +3)
|
||||
;;
|
||||
netgear,ex6100v2 |\
|
||||
netgear,ex6150v2)
|
||||
ath10kcal_extract "ART" 20480 12064
|
||||
ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 12)
|
||||
;;
|
||||
zyxel,nbg6617 |\
|
||||
zyxel,wre6606)
|
||||
ath10kcal_extract "ART" 20480 12064
|
||||
ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
*)
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
18
target/linux/ipq40xx/base-files/etc/init.d/bootcount
Executable file
18
target/linux/ipq40xx/base-files/etc/init.d/bootcount
Executable file
@@ -0,0 +1,18 @@
|
||||
#!/bin/sh /etc/rc.common
|
||||
|
||||
START=99
|
||||
|
||||
start() {
|
||||
. /lib/functions.sh
|
||||
|
||||
case $(board_name) in
|
||||
alfa-network,ap120c-ac)
|
||||
[ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
|
||||
echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
|
||||
;;
|
||||
linksys,ea6350v3|\
|
||||
linksys,ea8300)
|
||||
mtd resetbc s_env || true
|
||||
;;
|
||||
esac
|
||||
}
|
||||
4
target/linux/ipq40xx/base-files/etc/inittab
Normal file
4
target/linux/ipq40xx/base-files/etc/inittab
Normal file
@@ -0,0 +1,4 @@
|
||||
# Copyright (c) 2013 The Linux Foundation. All rights reserved.
|
||||
::sysinit:/etc/init.d/rcS S boot
|
||||
::shutdown:/etc/init.d/rcS K shutdown
|
||||
ttyMSM0::askfirst:/usr/libexec/login.sh
|
||||
Reference in New Issue
Block a user