domenico/openwrt-19.07
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
domenico
2025-06-24 16:03:39 +02:00
commit f3256cdaf2
6949 changed files with 1441681 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

58
target/linux/ipq806x/base-files/etc/board.d/01_leds Executable file
View File

@@ -0,0 +1,58 @@
#!/bin/sh
#
# Copyright (C) 2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
board_config_update
board=$(board_name)
boardname="${board##*,}"
case "$board" in
buffalo,wxr-2533dhp)
ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:white:wireless" "phy0tpt"
ucidef_set_led_switch "wan" "WAN" "${boardname}:white:internet" "switch0" "0x20"
;;
compex,wpq864)
ucidef_set_led_usbport "usb" "USB" "wpq864:green:usb" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "pcie-usb" "PCIe USB" "wpq864:green:usb-pcie" "usb3-port1"
;;
nec,wg2600hp)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy0tpt"
ucidef_set_led_switch "wan" "WAN" "${boardname}:green:active" "switch0" "0x2"
;;
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\
netgear,r7800)
ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb1" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb2" "usb3-port1" "usb4-port1"
ucidef_set_led_switch "wan" "WAN" "${boardname}:white:wan" "switch0" "0x20"
ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata"
;;
tplink,c2600)
ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
;;
tplink,vr2600v)
ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:white:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt"
ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
;;
zyxel,nbg6817)
ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
;;
*)
;;
esac
board_config_flush
exit 0

65
target/linux/ipq806x/base-files/etc/board.d/02_network Executable file
View File

@@ -0,0 +1,65 @@
#!/bin/sh
#
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
# Copyright (c) 2011-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
board_config_update
board=$(board_name)
case "$board" in
buffalo,wxr-2533dhp |\
compex,wpq864 |\
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\
qcom,ipq8064-ap148 |\
tplink,vr2600v)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
;;
qcom,ipq8064-ap161)
ucidef_set_interface_lan "eth1 eth2"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
;;
linksys,ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
;;
nec,wg2600hp)
ucidef_add_switch "switch0" \
"2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0"
;;
netgear,r7800 |\
tplink,c2600)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
;;
qcom,ipq8064-db149)
ucidef_set_interface_lan "eth1 eth2 eth3"
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
;;
zyxel,nbg6817)
hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
;;
*)
echo "Unsupported hardware. Network interfaces not intialized"
;;
esac
board_config_flush
exit 0

151
target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata Normal file
View File

@@ -0,0 +1,151 @@
#!/bin/sh
# xor multiple hex values of the same length
xor() {
local val
local ret="0x$1"
local retlen=${#1}
shift
while [ -n "$1" ]; do
val="0x$1"
ret=$((ret ^ val))
shift
done
printf "%0${retlen}x" "$ret"
}
ath10kcal_die() {
echo "ath10cal: " "$*"
exit 1
}
ath10kcal_from_file() {
local source=$1
local offset=$2
local count=$3
dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $source"
}
ath10kcal_extract() {
local part=$1
local offset=$2
local count=$3
local mtd
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
ath10kcal_die "no mtd device found for partition $part"
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $mtd"
}
ath10kcal_patch_mac_crc() {
local mac=$1
local mac_offset=6
local chksum_offset=2
local xor_mac
local xor_fw_mac
local xor_fw_chksum
[ -z "$mac" ] && return
xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
xor_mac=${mac//:/}
xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
}
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions.sh
. /lib/functions/system.sh
board=$(board_name)
case "$FIRMWARE" in
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
buffalo,wxr-2533dhp)
ath10kcal_extract "ART" 4096 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 30)
;;
linksys,ea8500)
ath10kcal_extract "art" 4096 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1)
;;
nec,wg2600hp)
ath10kcal_extract "ART" 4096 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 12) +1)
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
ath10kcal_extract "art" 4096 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 6) +1)
;;
tplink,c2600)
ath10kcal_extract "radio" 4096 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
;;
tplink,vr2600v)
ath10kcal_extract "ART" 4096 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0) -1)
;;
zyxel,nbg6817)
ath10kcal_extract "0:ART" 4096 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
;;
esac
;;
"ath10k/pre-cal-pci-0001:01:00.0.bin")
case $board in
buffalo,wxr-2533dhp)
ath10kcal_extract "ART" 20480 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 24)
;;
linksys,ea8500)
ath10kcal_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2)
;;
nec,wg2600hp)
ath10kcal_extract "ART" 20480 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 12)
;;
netgear,d7800 |\
netgear,r7500v2 |\
netgear,r7800)
ath10kcal_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 6) +2)
;;
tplink,c2600)
ath10kcal_extract "radio" 20480 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 8)
;;
tplink,vr2600v)
ath10kcal_extract "ART" 20480 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0)
;;
zyxel,nbg6817)
ath10kcal_extract "0:ART" 20480 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
;;
esac
;;
*)
exit 1
;;
esac

31
target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac Normal file
View File

@@ -0,0 +1,31 @@
#!/bin/ash
[ "$ACTION" == "add" ] || exit 0
PHYNBR=${DEVPATH##*/phy}
[ -n $PHYNBR ] || exit 0
. /lib/functions.sh
. /lib/functions/system.sh
OPATH=${DEVPATH##/devices/platform/}
OPATH=${OPATH%%/ieee*}
# 10 radios is enough for anyone!
for i in `seq 0 9`;
do
BUS=`uci get wireless.@wifi-device[$i].path`
if [ "$BUS " == "$OPATH " ]
then
PHYNAME=${DEVPATH##*ieee80211/}
NPHYNAME=`uci get wireless.@wifi-device[$i].phyname`
if [ "$NPHYNAME " != " " ]
then
if [ "$PHYNAME " != "$NPHYNAME " ]
then
iw $PHYNAME set name $NPHYNAME
fi
fi
fi
done

13
target/linux/ipq806x/base-files/etc/init.d/bootcount Executable file
View File

@@ -0,0 +1,13 @@
#!/bin/sh /etc/rc.common
START=99
start() {
. /lib/functions.sh
case $(board_name) in
linksys,ea8500)
mtd resetbc s_env || true
;;
esac
}

4
target/linux/ipq806x/base-files/etc/inittab Normal file
View File

@@ -0,0 +1,4 @@
# Copyright (c) 2013 The Linux Foundation. All rights reserved.
::sysinit:/etc/init.d/rcS S boot
::shutdown:/etc/init.d/rcS K shutdown
ttyMSM0::askfirst:/usr/libexec/login.sh