Initial commit

target/linux/ramips/dts/CY-SWR1100.dts

@@ -0,0 +1,152 @@
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "samsung,cy-swr1100", "ralink,rt3883-soc";
+	model = "Samsung CY-SWR1100";
+
+	aliases {
+		led-boot = &led_wps;
+		led-failsafe = &led_wps;
+	};
+
+	nor-flash@1c000000 {
+		compatible = "cfi-flash";
+		reg = <0x1c000000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "uboot-env";
+				reg = <0x30000 0x4000>;
+				read-only;
+			};
+
+			factory: partition@34000 {
+				label = "factory";
+				reg = <0x34000 0x4000>;
+				read-only;
+			};
+
+			partition@38000 {
+				label = "nvram";
+				reg = <0x38000 0x8000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "devdata";
+				reg = <0x40000 0x10000>;
+			};
+
+			partition@50000 {
+				compatible = "seama";
+				label = "firmware";
+				reg = <0x50000 0x7b0000>;
+			};
+		};
+	};
+
+	rtl8367 {
+		compatible = "realtek,rtl8367";
+		gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_wps: wps {
+			label = "cy-swr1100:blue:wps";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			label = "cy-swr1100:blue:usb";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "spi";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	port@0 {
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+};
+
+&pci {
+	status = "okay";
+};
+
+&pci1 {
+	status = "okay";
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x10000 0 0 0 0>;
+		ralink,5ghz = <0>;
+		ralink,mtd-eeprom = <&factory 0x2000>;
+	};
+};
+
+&wmac {
+	status = "okay";
+	ralink,2ghz = <0>;
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};