domenico/openwrt-R7800-nss
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

qualcommax: ipq807x: add support for Linksys HomeWRK

Browse Source 
Hardware specification:
========
SoC: Qualcomm IPQ8174
Flash: 1GB (Micron MT29F8G08ABBCAH4 or AMD/Spansion S34MS08G2)
RAM: 2GB (2x Kingston B5116ECMDXGJD or ESMT M15T2G16128A DDR3L)
Ethernet: 4x 10/100/1000Mbps (Qualcomm QCA8075)
WiFi1: 5GHz ax 2x2 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-64 (low band)
WiFi2: 2.4GHz ax 2x2 (Qualcomm QCN5024 + Skyworks SKY85340-11)
WiFi3: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 100-177 (high band)
LED: 1x RGB status (NXP PCA9633)
USB: 1x USB 3.0
Button: WPS, Reset

Flash instructions:
========
1. Installation from initramfs image using USB drive:
Put the initramfs image on the USB drive:
- dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_homewrk-initramfs-uImage.itb of=/dev/sdX
Connect serial console (JST PH 6-pin connector):
- 1 - GND, 2 - TX, 4 - RX (115200, 8N1, 3.3V)
Stop u-boot and run:
- usb start && usbboot 44000000 0 && bootm 44000000
Write firmware to the flash from initramfs:
- sysupgrade -n openwrt-qualcommax-ipq807x-linksys_homewrk-squashfs-sysupgrade.bin
or
- ubiformat /dev/mtd22 -y -f openwrt-qualcommax-ipq807x-linksys_homewrk-squashfs-factory.ubi

2. USB recovery:
Put the initramfs image on the USB:
- dd bs=1M if=openwrt-qualcommax-ipq807x-linksys_homewrk-initramfs-uImage.itb of=/dev/sdX
Set u-boot env:
- fw_setenv bootusb 'usb start && usbboot 44000000 0 && bootm 44000000'
- fw_setenv bootcmd 'run bootusb; bootipq'

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17463
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Paweł Owoc
2024-08-17 16:59:58 +02:00
committed by Robert Marko
parent f64541db02
commit 07f8319d2d
7 changed files with 100 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
package/boot/uboot-envtools/files/qualcommax_ipq807x
View File

@@ -29,6 +29,11 @@ edimax,cax1800)
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x20000"
;;
linksys,homewrk)
idx="$(find_mtd_index 0:appsblenv)"
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x40000"
;;
linksys,mx4200v1|\
linksys,mx4200v2|\
linksys,mx5300|\

8
package/firmware/ipq-wifi/Makefile
View File

@@ -6,9 +6,9 @@ PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
PKG_SOURCE_DATE:=2024-12-18
PKG_SOURCE_VERSION:=4b849214b137b14a903112af3c2016ad9acf48c2
PKG_MIRROR_HASH:=28162682fe7612460e42398ecc669e245fc0ece873361e3910c2dd8a56111f1c
PKG_SOURCE_DATE:=2025-01-15
PKG_SOURCE_VERSION:=6e1801a4992fe72a98a2219f2dcd038194785971
PKG_MIRROR_HASH:=569cf6894e21712ed6a5553b4fad0bbdeed14e0cc4b9292f5f86343f7897fc7e
PKG_FLAGS:=nonshared
include $(INCLUDE_DIR)/package.mk
@@ -37,6 +37,7 @@ ALLWIFIBOARDS:= \
dynalink_dl-wrx36 \
edgecore_eap102 \
edimax_cax1800 \
linksys_homewrk \
linksys_mr7350 \
linksys_mx4200 \
linksys_mx5300 \
@@ -168,6 +169,7 @@ $(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,linksys_homewrk,Linksys HomeWRK))
$(eval $(call generate-ipq-wifi-package,linksys_mr7350,Linksys MR7350))
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))