ipq40xx: add Edgecore OAP-100 support
flashing the unit * first update to latest edcore FW as per the PDF instructions * boot the initramfs - tftpboot 0x88000000 openwrt-ipq40xx-generic-edgecore_oap100-initramfs-fit-uImage.itb; bootm * inside the initramfs call the following commiands - ubiattach -p /dev/mtd0 - ubirmvol /dev/ubi0 -n0 - ubirmvol /dev/ubi0 -n1 - ubirmvol /dev/ubi0 -n2 * scp the sysupgrade image to the board and call - sysupgrade -n openwrt-ipq40xx-generic-edgecore_oap100-squashfs-nand-sysupgrade.bin Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
John Crispin
@@ -33,6 +33,7 @@ ALLWIFIBOARDS:= \
|
||||
dlink_dap2610 \
|
||||
edgecore_ecw5211 \
|
||||
edgecore_ecw5410 \
|
||||
edgecore_oap100 \
|
||||
engenius_eap2200 \
|
||||
engenius_emd1 \
|
||||
engenius_emr3500 \
|
||||
@@ -109,6 +110,7 @@ $(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
|
||||
$(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
|
||||
$(eval $(call generate-ipq-wifi-package,edgecore_ecw5211,Edgecore ECW5211))
|
||||
$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
|
||||
$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
|
||||
$(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
|
||||
$(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
|
||||
$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
|
||||
|
||||
BIN
package/firmware/ipq-wifi/board-edgecore_oap100.qca4019
Normal file
BIN
package/firmware/ipq-wifi/board-edgecore_oap100.qca4019
Normal file
Binary file not shown.
@@ -27,6 +27,10 @@ avm,fritzbox-7530 |\
|
||||
glinet,gl-b1300)
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt"
|
||||
;;
|
||||
edgecore,oap100)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5g" "phy1tpt"
|
||||
;;
|
||||
engenius,eap1300)
|
||||
ucidef_set_led_netdev "lan" "LAN" "${boardname}:blue:lan" "eth0"
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
|
||||
|
||||
@@ -39,6 +39,7 @@ ipq40xx_setup_interfaces()
|
||||
asus,map-ac2200|\
|
||||
cilab,meshpoint-one|\
|
||||
edgecore,ecw5211|\
|
||||
edgecore,oap100|\
|
||||
openmesh,a42|\
|
||||
openmesh,a62)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
|
||||
@@ -94,6 +94,7 @@ case "$FIRMWARE" in
|
||||
compex,wpj419 |\
|
||||
compex,wpj428 |\
|
||||
edgecore,ecw5211 |\
|
||||
edgecore,oap100 |\
|
||||
engenius,eap1300 |\
|
||||
engenius,eap2200 |\
|
||||
openmesh,a42 |\
|
||||
@@ -188,6 +189,7 @@ case "$FIRMWARE" in
|
||||
compex,wpj419 |\
|
||||
compex,wpj428 |\
|
||||
edgecore,ecw5211 |\
|
||||
edgecore,oap100 |\
|
||||
engenius,eap1300 |\
|
||||
engenius,eap2200 |\
|
||||
openmesh,a42 |\
|
||||
|
||||
@@ -67,6 +67,7 @@ platform_do_upgrade() {
|
||||
buffalo,wtr-m2133hp |\
|
||||
cilab,meshpoint-one |\
|
||||
edgecore,ecw5211 |\
|
||||
edgecore,oap100 |\
|
||||
engenius,eap2200 |\
|
||||
mobipromo,cm520-79f |\
|
||||
qxwlan,e2600ac-c2)
|
||||
|
||||
339
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
Executable file
339
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts
Executable file
@@ -0,0 +1,339 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq4019.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "EdgeCore OAP-100";
|
||||
compatible = "edgecore,oap100";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_system;
|
||||
led-failsafe = &led_system;
|
||||
led-running = &led_system;
|
||||
led-upgrade = &led_system;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-append = " root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
soc {
|
||||
mdio@90000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
ess-psgmii@98000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
tcsr@1949000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1949000 0x100>;
|
||||
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
||||
};
|
||||
|
||||
ess_tcsr@1953000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1953000 0x1000>;
|
||||
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
||||
};
|
||||
|
||||
tcsr@1957000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1957000 0x100>;
|
||||
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
||||
};
|
||||
|
||||
tcsr@194b000 {
|
||||
/* select hostmode */
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x194b000 0x100>;
|
||||
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2@60f8800 {
|
||||
status = "okay";
|
||||
|
||||
dwc3@6000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usb2_port1: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb3@8af8800 {
|
||||
status = "okay";
|
||||
|
||||
dwc3@8a00000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usb3_port1: port@1 {
|
||||
reg = <1>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
|
||||
usb3_port2: port@2 {
|
||||
reg = <2>;
|
||||
#trigger-source-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
crypto@8e3a000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@b017000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess-switch@c000000 {
|
||||
status = "okay";
|
||||
switch_mac_mode = <0x0>; /* mac mode for RGMII RMII */
|
||||
switch_initvlas = <0x0007c 0x54>; /* port0 status */
|
||||
switch_lan_bmp = <0x10>;
|
||||
};
|
||||
|
||||
edma@c080000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
key {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button@1 {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_system: led_system {
|
||||
label = "oap100:green:system";
|
||||
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_2g {
|
||||
label = "oap100:blue:wlan2g";
|
||||
gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_5g {
|
||||
label = "oap100:blue:wlan5g";
|
||||
gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
usb {
|
||||
gpio-export,name = "usb-power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
poe {
|
||||
gpio-export,name = "poe-power";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
serial_0_pins: serial_pinmux {
|
||||
mux {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "blsp_uart0";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_0_pins: spi_0_pinmux {
|
||||
pinmux {
|
||||
function = "blsp_spi0";
|
||||
pins = "gpio13", "gpio14", "gpio15";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinmux_cs {
|
||||
function = "gpio";
|
||||
pins = "gpio12";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
pullups {
|
||||
pins = "gpio53", "gpio58", "gpio59";
|
||||
function = "qpic";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pulldowns {
|
||||
pins = "gpio54", "gpio55", "gpio56",
|
||||
"gpio57", "gpio60", "gpio61",
|
||||
"gpio62", "gpio63", "gpio64",
|
||||
"gpio65", "gpio66", "gpio67",
|
||||
"gpio68", "gpio69";
|
||||
function = "qpic";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
mdio_pins: mdio_pinmux {
|
||||
mux_1 {
|
||||
pins = "gpio6";
|
||||
function = "mdio";
|
||||
bias-pull-up;
|
||||
};
|
||||
mux_2 {
|
||||
pins = "gpio7";
|
||||
function = "mdc";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_spi1 {
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
linux,modalias = "m25p80", "gd25q256";
|
||||
spi-max-frequency = <24000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition0@0 {
|
||||
label = "0:SBL1";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition1@40000 {
|
||||
label = "0:MIBIB";
|
||||
reg = <0x00040000 0x00020000>;
|
||||
read-only;
|
||||
};
|
||||
partition2@60000 {
|
||||
label = "0:QSEE";
|
||||
reg = <0x00060000 0x00060000>;
|
||||
read-only;
|
||||
};
|
||||
partition3@c0000 {
|
||||
label = "0:CDT";
|
||||
reg = <0x000c0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition4@d0000 {
|
||||
label = "0:DDRPARAMS";
|
||||
reg = <0x000d0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition5@e0000 {
|
||||
label = "0:APPSBLENV";
|
||||
reg = <0x000e0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition6@f0000 {
|
||||
label = "0:APPSBL";
|
||||
reg = <0x000f0000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
partition7@170000 {
|
||||
label = "0:ART";
|
||||
reg = <0x00170000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "rootfs";
|
||||
reg = <0x00000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
pinctrl-0 = <&serial_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
status = "okay";
|
||||
qcom,ath10k-calibration-variant = "Edgecore OAP100";
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
status = "okay";
|
||||
qcom,ath10k-calibration-variant = "Edgecore OAP100";
|
||||
};
|
||||
|
||||
&usb3_ss_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_hs_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_hs_phy {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -356,6 +356,19 @@ define Device/edgecore_ecw5211
|
||||
endef
|
||||
TARGET_DEVICES += edgecore_ecw5211
|
||||
|
||||
define Device/edgecore_oap100
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_TITLE := Edgecore OAP100
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGES := nand-sysupgrade.bin
|
||||
DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
|
||||
DEVICE_DTS := qcom-ipq4019-oap100
|
||||
DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
|
||||
endef
|
||||
TARGET_DEVICES += edgecore_oap100
|
||||
|
||||
define Device/engenius_eap1300
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := EnGenius
|
||||
|
||||
@@ -0,0 +1,165 @@
|
||||
From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
|
||||
From: John Crispin <blogic@openwrt.org>
|
||||
Date: Tue, 12 Aug 2014 20:49:27 +0200
|
||||
Subject: [PATCH 24/53] GPIO: add named gpio exports
|
||||
|
||||
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||||
---
|
||||
drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
|
||||
drivers/gpio/gpiolib-sysfs.c | 10 +++++-
|
||||
include/asm-generic/gpio.h | 6 ++++
|
||||
include/linux/gpio/consumer.h | 8 +++++
|
||||
4 files changed, 91 insertions(+), 1 deletion(-)
|
||||
|
||||
--- a/drivers/gpio/gpiolib-of.c
|
||||
+++ b/drivers/gpio/gpiolib-of.c
|
||||
@@ -23,6 +23,8 @@
|
||||
#include <linux/pinctrl/pinctrl.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
|
||||
#include "gpiolib.h"
|
||||
|
||||
@@ -513,3 +515,68 @@ void of_gpiochip_remove(struct gpio_chip
|
||||
gpiochip_remove_pin_ranges(chip);
|
||||
of_node_put(chip->of_node);
|
||||
}
|
||||
+
|
||||
+static struct of_device_id gpio_export_ids[] = {
|
||||
+ { .compatible = "gpio-export" },
|
||||
+ { /* sentinel */ }
|
||||
+};
|
||||
+
|
||||
+static int of_gpio_export_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct device_node *np = pdev->dev.of_node;
|
||||
+ struct device_node *cnp;
|
||||
+ u32 val;
|
||||
+ int nb = 0;
|
||||
+
|
||||
+ for_each_child_of_node(np, cnp) {
|
||||
+ const char *name = NULL;
|
||||
+ int gpio;
|
||||
+ bool dmc;
|
||||
+ int max_gpio = 1;
|
||||
+ int i;
|
||||
+
|
||||
+ of_property_read_string(cnp, "gpio-export,name", &name);
|
||||
+
|
||||
+ if (!name)
|
||||
+ max_gpio = of_gpio_count(cnp);
|
||||
+
|
||||
+ for (i = 0; i < max_gpio; i++) {
|
||||
+ unsigned flags = 0;
|
||||
+ enum of_gpio_flags of_flags;
|
||||
+
|
||||
+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
|
||||
+ if (!gpio_is_valid(gpio))
|
||||
+ return gpio;
|
||||
+
|
||||
+ if (of_flags == OF_GPIO_ACTIVE_LOW)
|
||||
+ flags |= GPIOF_ACTIVE_LOW;
|
||||
+
|
||||
+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
|
||||
+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
|
||||
+ else
|
||||
+ flags |= GPIOF_IN;
|
||||
+
|
||||
+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
|
||||
+ continue;
|
||||
+
|
||||
+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
|
||||
+ gpio_export_with_name(gpio, dmc, name);
|
||||
+ nb++;
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver gpio_export_driver = {
|
||||
+ .driver = {
|
||||
+ .name = "gpio-export",
|
||||
+ .owner = THIS_MODULE,
|
||||
+ .of_match_table = of_match_ptr(gpio_export_ids),
|
||||
+ },
|
||||
+ .probe = of_gpio_export_probe,
|
||||
+};
|
||||
+
|
||||
+module_platform_driver(gpio_export_driver);
|
||||
--- a/drivers/gpio/gpiolib-sysfs.c
|
||||
+++ b/drivers/gpio/gpiolib-sysfs.c
|
||||
@@ -553,7 +553,7 @@ static struct class gpio_class = {
|
||||
*
|
||||
* Returns zero on success, else an error.
|
||||
*/
|
||||
-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
|
||||
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
|
||||
{
|
||||
struct gpio_chip *chip;
|
||||
struct gpio_device *gdev;
|
||||
@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc,
|
||||
offset = gpio_chip_hwgpio(desc);
|
||||
if (chip->names && chip->names[offset])
|
||||
ioname = chip->names[offset];
|
||||
+ if (name)
|
||||
+ ioname = name;
|
||||
|
||||
dev = device_create_with_groups(&gpio_class, &gdev->dev,
|
||||
MKDEV(0, 0), data, gpio_groups,
|
||||
@@ -636,6 +638,12 @@ err_unlock:
|
||||
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
|
||||
return status;
|
||||
}
|
||||
+EXPORT_SYMBOL_GPL(__gpiod_export);
|
||||
+
|
||||
+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
|
||||
+{
|
||||
+ return __gpiod_export(desc, direction_may_change, NULL);
|
||||
+}
|
||||
EXPORT_SYMBOL_GPL(gpiod_export);
|
||||
|
||||
static int match_export(struct device *dev, const void *desc)
|
||||
--- a/include/asm-generic/gpio.h
|
||||
+++ b/include/asm-generic/gpio.h
|
||||
@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
|
||||
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
|
||||
}
|
||||
|
||||
+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
|
||||
+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
|
||||
+{
|
||||
+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
|
||||
+}
|
||||
+
|
||||
static inline int gpio_export_link(struct device *dev, const char *name,
|
||||
unsigned gpio)
|
||||
{
|
||||
--- a/include/linux/gpio/consumer.h
|
||||
+++ b/include/linux/gpio/consumer.h
|
||||
@@ -451,6 +451,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
|
||||
|
||||
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
|
||||
|
||||
+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
|
||||
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
|
||||
int gpiod_export_link(struct device *dev, const char *name,
|
||||
struct gpio_desc *desc);
|
||||
@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de
|
||||
|
||||
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
|
||||
|
||||
+static inline int _gpiod_export(struct gpio_desc *desc,
|
||||
+ bool direction_may_change,
|
||||
+ const char *name)
|
||||
+{
|
||||
+ return -ENOSYS;
|
||||
+}
|
||||
+
|
||||
static inline int gpiod_export(struct gpio_desc *desc,
|
||||
bool direction_may_change)
|
||||
{
|
||||
@@ -12,7 +12,7 @@ Index: linux-5.4.63/arch/arm/boot/dts/Makefile
|
||||
===================================================================
|
||||
--- linux-5.4.63.orig/arch/arm/boot/dts/Makefile
|
||||
+++ linux-5.4.63/arch/arm/boot/dts/Makefile
|
||||
@@ -837,11 +837,51 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
@@ -837,11 +837,52 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-apq8074-dragonboard.dtb \
|
||||
qcom-apq8084-ifc6540.dtb \
|
||||
qcom-apq8084-mtp.dtb \
|
||||
@@ -32,6 +32,7 @@ Index: linux-5.4.63/arch/arm/boot/dts/Makefile
|
||||
+ qcom-ipq4018-jalapeno.dtb \
|
||||
+ qcom-ipq4018-meshpoint-one.dtb \
|
||||
+ qcom-ipq4018-nbg6617.dtb \
|
||||
+ qcom-ipq4019-oap100.dtb \
|
||||
+ qcom-ipq4018-rt-ac58u.dtb \
|
||||
+ qcom-ipq4018-wre6606.dtb \
|
||||
qcom-ipq4019-ap.dk01.1-c1.dtb \
|
||||
|
||||
Reference in New Issue
Block a user