domenico/openwrt-R7800-nss
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ramips: add support for Netgear EAX12 series

Browse Source 
Netgear EAX12, EAX11v2, EAX15v2 are wall-plug 802.11ax (Wi-Fi 6)
extenders that share the SoC, WiFi chip, and image format with the
WAX202.

Specifications:
* MT7621, 256 MiB RAM, 128 MiB NAND
* MT7915: 2.4/5 GHz 2x2 802.11ax (DBDC)
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)

All LEDs and buttons appear to work without state_default.

Installation:
* Flash the factory image through the stock web interface, or TFTP to
  the bootloader. NMRP can be used to TFTP without opening the case.

Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.

References in GPL source:
https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz

* target/linux/ramips/dts/mt7621-rfb-ax-nand.dts
  DTS file for this device.

Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
This commit is contained in:
Wenli Looi
2023-03-30 22:28:23 +00:00
committed by Hauke Mehrtens
parent 0a1ebccc87
commit 32ea8a9a7e
7 changed files with 231 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
package/boot/uboot-envtools/files/ramips
View File

@@ -65,6 +65,7 @@ h3c,tx1801-plus|\
h3c,tx1806|\
jcg,q20|\
linksys,e7350|\
netgear,eax12|\
netgear,wax202|\
zyxel,wsm20)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"