domenico/openwrt-R7800-nss
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

kernel: backport fixes for realtek r8152

Browse Source 
Fixes issues with RTL8156 2.5G USB adapters

- # ethtool eth1
Settings for eth1:
        Supported ports: [ ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 2500Mb/s
        Duplex: Half
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: off
        MDI-X: Unknown
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes
- #

- r8152: break the loop when the budget is exhausted
- r8152: Block future register access if register access fails
- r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
- r8152: add vendor/device ID pair for D-Link DUB-E250
- r8152: try to use a normal budget
- r8152: set bp in bulk
- r8152: adjust generic_ocp_write function
- r8152: fix the autosuspend doesn't work
- r8152: Add __GFP_NOWARN to big allocations
- r8152: reduce the control transfer of rtl8152_get_version()
- r8152: remove rtl_vendor_mode function
- r8152: avoid to change cfg for all devices
- r8152: add USB device driver for config selection
- r8152: use napi_gro_frags
- cdc_ether: no need to blacklist any r8152 devices
- cdc_ether: add u-blox 0x1313 composition

Build system: x86_64
Build-tested: bcm2711, rockchip, x86/64
Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64

Signed-off-by: Marty Jones <mj8263788@gmail.com>
This commit is contained in:
Marty Jones
2023-11-28 13:27:18 -05:00
committed by Christian Lamparter
parent cb86e313d3
commit 34d2964554
32 changed files with 3889 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/generic/hack-6.1/760-net-usb-r8152-add-LED-configuration-from-OF.patch
View File

@@ -22,7 +22,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
#include <linux/crc32.h>
#include <linux/if_vlan.h>
#include <linux/uaccess.h>
@@ -6903,6 +6904,22 @@ static void rtl_tally_reset(struct r8152
@@ -7020,6 +7021,22 @@ static void rtl_tally_reset(struct r8152
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
}
@@ -45,7 +45,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
static void r8152b_init(struct r8152 *tp)
{
u32 ocp_data;
@@ -6944,6 +6961,8 @@ static void r8152b_init(struct r8152 *tp
@@ -7061,6 +7078,8 @@ static void r8152b_init(struct r8152 *tp
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
@@ -54,7 +54,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
}
static void r8153_init(struct r8152 *tp)
@@ -7084,6 +7103,8 @@ static void r8153_init(struct r8152 *tp)
@@ -7201,6 +7220,8 @@ static void r8153_init(struct r8152 *tp)
tp->coalesce = COALESCE_SLOW;
break;
}
@@ -63,7 +63,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
}
static void r8153b_init(struct r8152 *tp)
@@ -7166,6 +7187,8 @@ static void r8153b_init(struct r8152 *tp
@@ -7283,6 +7304,8 @@ static void r8153b_init(struct r8152 *tp
rtl_tally_reset(tp);
tp->coalesce = 15000; /* 15 us */