packages: clean up the package folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007

package/kernel/broadcom-wl/patches/003-compat-2.6.35.patch

@@ -0,0 +1,39 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -2082,7 +2082,11 @@ static void
+ _wl_set_multicast_list(struct net_device *dev)
+ {
+ 	wl_info_t *wl;
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,34)
+ 	struct dev_mc_list *mclist;
++#else
++	struct netdev_hw_addr *ha;
++#endif
+ 	int i;
+ 
+ 	if (!dev)
+@@ -2098,14 +2102,24 @@ _wl_set_multicast_list(struct net_device
+ 		wl->pub->allmulti = (dev->flags & IFF_ALLMULTI)? TRUE: FALSE;
+ 
+ 		/* copy the list of multicasts into our private table */
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,34)
+ 		for (i = 0, mclist = dev->mc_list; mclist && (i < dev->mc_count);
+ 			i++, mclist = mclist->next) {
++#else
++		i = 0;
++		netdev_for_each_mc_addr(ha, dev) {
++#endif
+ 			if (i >= MAXMULTILIST) {
+ 				wl->pub->allmulti = TRUE;
+ 				i = 0;
+ 				break;
+ 			}
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,34)
+ 			wl->pub->multicast[i] = *((struct ether_addr*) mclist->dmi_addr);
++#else
++			wl->pub->multicast[i] = *((struct ether_addr*) ha->addr);
++			i++;
++#endif
+ 		}
+ 		wl->pub->nmulticast = i;
+ 		wlc_set(wl->wlc, WLC_SET_PROMISC, (dev->flags & IFF_PROMISC));

package/kernel/broadcom-wl/patches/004-remove-pcmcia.patch

@@ -0,0 +1,22 @@
+--- a/driver/include/linuxver.h
++++ b/driver/include/linuxver.h
+@@ -111,7 +111,7 @@ typedef irqreturn_t(*FN_ISR) (int irq, v
+ #endif /* not SANDGATE2G */
+ #endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 67) */
+ 
+-#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
++#if 0
+ 
+ #include <pcmcia/cs_types.h>
+ #include <pcmcia/cs.h>
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -62,7 +62,7 @@ struct osl_info {
+ };
+ 
+ /* PCMCIA attribute space access macros */
+-#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
++#if 0
+ struct pcmcia_dev {
+ 	dev_link_t link;	/* PCMCIA device pointer */
+ 	dev_node_t node;	/* PCMCIA node structure */

package/kernel/broadcom-wl/patches/005-fix-mem-leak-on-unload.patch

@@ -0,0 +1,31 @@
+From: George Kashperko <george@znau.edu.ua>
+
+Release nvram variables buffer.
+Prevent block reserved by alloc_etherdev from being freed.
+Signed-off-by: George Kashperko <george@znau.edu.ua>
+---
+---
+--- a/driver/siutils.c
++++ b/driver/siutils.c
+@@ -647,7 +647,10 @@ si_detach(si_t *sih)
+ #if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SI_BUS)
+ 	if (sii != &ksii)
+ #endif	/* !BCMBUSTYPE || (BCMBUSTYPE == SI_BUS) */
+-		MFREE(sii->osh, sii, sizeof(si_info_t));
++		do {
++			MFREE(sii->osh, sii, sizeof(si_info_t));
++			nvram_exit((void *)&(sii->pub));
++		} while (0);
+ }
+ 
+ void *
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -1477,7 +1477,6 @@ wl_free_if(wl_info_t *wl, wl_if_t *wlif)
+ 		free_netdev(wlif->dev);
+ #endif
+ 	}
+-	MFREE(wl->osh, wlif, sizeof(wl_if_t));
+ }
+ 
+ #ifdef AP

package/kernel/broadcom-wl/patches/006-generic-dma-api.patch

@@ -0,0 +1,88 @@
+From: George Kashperko <george@znau.edu.ua>
+
+broadcom-wl driver bound to ssb device with ssb driver probe
+have osh handle struct pdev pointer value initialized with
+ssb_device pointer. Later on pdev is used with legacy pci
+dma api as pci_dev thus causing oops sometimes.
+
+The patch replaces legacy pci dma api and pass relevant
+device struct pointer to avoid crashes.
+Signed-off-by: George Kashperko <george@znau.edu.ua>
+---
+ driver/linux_osl.c |   28 +++++++++++++++++++++++-----
+ 1 file changed, 23 insertions(+), 5 deletions(-)
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -25,6 +25,9 @@
+ #include <asm/paccess.h>
+ #endif /* mips */
+ #include <pcicfg.h>
++#ifdef CONFIG_SSB
++#include <linux/ssb/ssb.h>
++#endif
+ 
+ #define PCI_CFG_RETRY 		10
+ 
+@@ -364,12 +367,27 @@ osl_dma_consistent_align(void)
+ 	return (PAGE_SIZE);
+ }
+ 
++static struct device *
++osl_get_dmadev(osl_t *osh)
++{
++#ifdef CONFIG_SSB
++	if (osh->bustype == SI_BUS) {
++		/* This can be SiliconBackplane emulated as pci with Broadcom or
++		 * ssb device. Less harmful is to check for pci_bus_type and if
++		 * no match then assume we got ssb */
++		if (((struct pci_dev *)osh->pdev)->dev.bus != &pci_bus_type)
++			return ((struct ssb_device *)osh->pdev)->dma_dev;
++	}
++#endif
++	return &((struct pci_dev *)osh->pdev)->dev;
++}
++
+ void*
+ osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap)
+ {
+ 	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ 
+-	return (pci_alloc_consistent(osh->pdev, size, (dma_addr_t*)pap));
++	return (dma_alloc_coherent(osl_get_dmadev(osh), size, (dma_addr_t*)pap, GFP_ATOMIC));
+ }
+ 
+ void
+@@ -377,7 +395,7 @@ osl_dma_free_consistent(osl_t *osh, void
+ {
+ 	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ 
+-	pci_free_consistent(osh->pdev, size, va, (dma_addr_t)pa);
++	dma_free_coherent(osl_get_dmadev(osh), size, va, (dma_addr_t)pa);
+ }
+ 
+ uint BCMFASTPATH
+@@ -386,13 +404,13 @@ osl_dma_map(osl_t *osh, void *va, uint s
+ 	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ 
+ 	if (direction == DMA_TX)
+-		return (pci_map_single(osh->pdev, va, size, PCI_DMA_TODEVICE));
++		return (dma_map_single(osl_get_dmadev(osh), va, size, PCI_DMA_TODEVICE));
+ 	else {
+ #ifdef mips
+ 		dma_cache_inv((uint)va, size);
+ 		return (virt_to_phys(va));
+ #else /* mips */
+-		return (pci_map_single(osh->pdev, va, size, PCI_DMA_FROMDEVICE));
++		return (dma_map_single(osl_get_dmadev(osh), va, size, PCI_DMA_FROMDEVICE));
+ #endif /* mips */
+ 	}
+ }
+@@ -404,7 +422,7 @@ osl_dma_unmap(osl_t *osh, uint pa, uint 
+ 
+ 	ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ 	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
+-	pci_unmap_single(osh->pdev, (uint32)pa, size, dir);
++	dma_unmap_single(osl_get_dmadev(osh), (uint32)pa, size, dir);
+ }
+ 
+ 

package/kernel/broadcom-wl/patches/007-use-glue-driver.patch

@@ -0,0 +1,184 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -85,10 +85,9 @@ typedef void wlc_hw_info_t;
+ #include <bcmjtag.h>
+ #endif	/* BCMJTAG */
+ 
+-
+-#ifdef CONFIG_SSB
+-#include <linux/ssb/ssb.h>
+-#endif
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++#include <wl_glue.h>
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 
+ /* Linux wireless extension support */
+ #ifdef CONFIG_WIRELESS_EXT
+@@ -997,62 +996,32 @@ static struct pci_driver wl_pci_driver =
+ #endif	/* CONFIG_PCI */
+ #endif  
+ 
++#ifdef BCMJTAG
++static bcmjtag_driver_t wl_jtag_driver = {
++		wl_jtag_probe,
++		wl_jtag_detach,
++		wl_jtag_poll,
++		};
++#endif	/* BCMJTAG */
+ 
+-static int wl_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id)
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++static void * glue_attach_cb(u16 vendor, u16 device,
++                                ulong mmio, void *dev, u32 irq)
+ {
+-	wl_info_t *wl;
+-	void *mmio;
+-
+-	if (dev->bus->bustype != SSB_BUSTYPE_SSB) {
+-		printk("Attaching to SSB behind PCI is not supported. Please remove the b43 ssb bridge\n");
+-		return -EINVAL;
+-	}
+-
+-	mmio = (void *) 0x18000000 + dev->core_index * 0x1000;
+-	wl = wl_attach(id->vendor, id->coreid, (ulong) mmio, SI_BUS, dev, dev->irq);
+-	if (!wl) {
+-		printk("wl_attach failed\n");
+-		return -ENODEV;
+-	}
+-
+-	ssb_set_drvdata(dev, wl);
+-
+-	return 0;
++	return wl_attach(vendor, device, mmio, SI_BUS, dev, irq);
+ }
+ 
+-static void wl_ssb_remove(struct ssb_device *dev)
++static void glue_remove_cb(void *wldev)
+ {
+-	wl_info_t *wl = (wl_info_t *) ssb_get_drvdata(dev);
++	wl_info_t *wl = (wl_info_t *)wldev;
+ 
+ 	WL_LOCK(wl);
+ 	WL_APSTA_UPDN(("wl%d (%s): wl_remove() -> wl_down()\n", wl->pub->unit, wl->dev->name));
+ 	wl_down(wl);
+ 	WL_UNLOCK(wl);
+ 	wl_free(wl);
+-	ssb_set_drvdata(dev, NULL);
+ }
+-
+-static const struct ssb_device_id wl_ssb_tbl[] = {
+-	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, SSB_ANY_REV),
+-	SSB_DEVTABLE_END
+-};
+-
+-#ifdef CONFIG_SSB
+-static struct ssb_driver wl_ssb_driver = {
+-	.name	= KBUILD_MODNAME,
+-	.id_table = wl_ssb_tbl,
+-	.probe = wl_ssb_probe,
+-	.remove = wl_ssb_remove,
+-};
+-#endif
+-
+-#ifdef BCMJTAG
+-static bcmjtag_driver_t wl_jtag_driver = {
+-		wl_jtag_probe,
+-		wl_jtag_detach,
+-		wl_jtag_poll,
+-		};
+-#endif	/* BCMJTAG */
++#endif/* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 
+ 
+ /** 
+@@ -1067,11 +1036,13 @@ wl_module_init(void)
+ {
+ 	int error = -ENODEV;
+ 
+-#ifdef CONFIG_SSB
+-	error = ssb_driver_register(&wl_ssb_driver);
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++	wl_glue_set_attach_callback(&glue_attach_cb);
++	wl_glue_set_remove_callback(&glue_remove_cb);
++	error = wl_glue_register();
+ 	if (error)
+ 		return error;
+-#endif	/* CONFIG_SSB */
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 
+ #ifdef CONFIG_PCI
+ 	error = pci_register_driver(&wl_pci_driver);
+@@ -1082,7 +1053,9 @@ wl_module_init(void)
+ 	return 0;
+ 
+ error_pci:
+-	ssb_driver_unregister(&wl_ssb_driver);
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++	wl_glue_unregister();
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 	return error;
+ }
+ 
+@@ -1099,9 +1072,9 @@ wl_module_exit(void)
+ #ifdef CONFIG_PCI
+ 	pci_unregister_driver(&wl_pci_driver);
+ #endif	/* CONFIG_PCI */
+-#ifdef CONFIG_SSB
+-	ssb_driver_unregister(&wl_ssb_driver);
+-#endif	/* CONFIG_SSB */
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++	wl_glue_unregister();
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ }
+ 
+ module_init(wl_module_init);
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -25,9 +25,9 @@
+ #include <asm/paccess.h>
+ #endif /* mips */
+ #include <pcicfg.h>
+-#ifdef CONFIG_SSB
+-#include <linux/ssb/ssb.h>
+-#endif
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
++#include <wl_glue.h>
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 
+ #define PCI_CFG_RETRY 		10
+ 
+@@ -370,15 +370,17 @@ osl_dma_consistent_align(void)
+ static struct device *
+ osl_get_dmadev(osl_t *osh)
+ {
+-#ifdef CONFIG_SSB
++#if defined(CONFIG_SSB) || defined(CONFIG_BCMA)
+ 	if (osh->bustype == SI_BUS) {
+-		/* This can be SiliconBackplane emulated as pci with Broadcom or
+-		 * ssb device. Less harmful is to check for pci_bus_type and if
+-		 * no match then assume we got ssb */
++		/* This can be SiliconBackplane emulated as pci with Broadcom,
++		 * ssb or bcma device. Less harmful is to check for pci_bus_type and if
++		 * no match then assume we got either ssb or bcma */
+ 		if (((struct pci_dev *)osh->pdev)->dev.bus != &pci_bus_type)
+-			return ((struct ssb_device *)osh->pdev)->dma_dev;
++		{
++			return wl_glue_get_dmadev(osh->pdev);
++		}
+ 	}
+-#endif
++#endif /* defined(CONFIG_SSB) || defined(CONFIG_BCMA) */
+ 	return &((struct pci_dev *)osh->pdev)->dev;
+ }
+ 
+--- a/driver/Makefile
++++ b/driver/Makefile
+@@ -1,7 +1,7 @@
+ BUILD_TYPE=wl_apsta
+ include $(src)/$(BUILD_TYPE)/buildflags.mk
+ 
+-EXTRA_CFLAGS += -I$(src)/include -I$(src) -DBCMDRIVER $(WLFLAGS)
++EXTRA_CFLAGS += -I$(src)/include -I$(src) -I$(realpath $(src)/../glue) -DBCMDRIVER $(WLFLAGS)
+ 
+ wl-objs := $(BUILD_TYPE)/wl_prebuilt.o wl_iw.o wl_linux.o linux_osl.o siutils.o aiutils.o hndpmu.o bcmutils.o sbutils.o nicpci.o hnddma.o bcmsrom.o nvram_stub.o
+ 

package/kernel/broadcom-wl/patches/008-fix_virtual_interfaces.patch

@@ -0,0 +1,11 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -1541,6 +1541,8 @@ wl_add_if(wl_info_t *wl, struct wlc_if* 
+ 		return NULL;
+ 	}
+ 
++	wl_if_setup(wlif->dev);
++
+ 	sprintf(wlif->dev->name, "%s%d.%d", devname, wl->pub->unit, wlif->subunit);
+ 	if (remote)
+ 		bcopy(remote, &wlif->remote, ETHER_ADDR_LEN);

package/kernel/broadcom-wl/patches/009-fix_compile_3_2.patch

@@ -0,0 +1,27 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -462,6 +462,16 @@ wl_schedule_fn(wl_info_t *wl, void (*fn)
+ }
+ #endif /* DSLCPE_DELAY */
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 2, 0)
++#define WL_DEFAULT_OPS \
++	.ndo_open = wl_open, \
++	.ndo_stop = wl_close, \
++	.ndo_start_xmit = wl_start, \
++	.ndo_get_stats = wl_get_stats, \
++	.ndo_set_mac_address = wl_set_mac_address, \
++	.ndo_set_rx_mode = wl_set_multicast_list, \
++	.ndo_do_ioctl = wl_ioctl
++#else
+ #define WL_DEFAULT_OPS \
+ 	.ndo_open = wl_open, \
+ 	.ndo_stop = wl_close, \
+@@ -470,6 +480,7 @@ wl_schedule_fn(wl_info_t *wl, void (*fn)
+ 	.ndo_set_mac_address = wl_set_mac_address, \
+ 	.ndo_set_multicast_list = wl_set_multicast_list, \
+ 	.ndo_do_ioctl = wl_ioctl
++#endif
+ 
+ static const struct net_device_ops wl_ops = {
+ 	WL_DEFAULT_OPS,

package/kernel/broadcom-wl/patches/010-remove_irqf_samble_random.patch

@@ -0,0 +1,11 @@
+--- a/driver/wl_linux.c	2012-09-26 20:51:48.099454971 -0400
++++ b/driver/wl_linux.c	2012-09-26 20:53:24.115453441 -0400
+@@ -691,7 +691,7 @@
+ 	if (wl->bustype != JTAG_BUS)
+ #endif	/* BCMJTAG */
+ 	{
+-		if (request_irq(irq, wl_isr, IRQF_SHARED|IRQF_SAMPLE_RANDOM, dev->name, wl)) {
++		if (request_irq(irq, wl_isr, IRQF_SHARED, dev->name, wl)) {
+ 			WL_ERROR(("wl%d: request_irq() failed\n", unit));
+ 			goto fail;
+ 		}

package/kernel/broadcom-wl/patches/011-fix_compile_3_4.patch

@@ -0,0 +1,12 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -49,7 +49,9 @@
+ #include <linux/ieee80211.h>
+ #endif
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)
+ #include <asm/system.h>
++#endif
+ #include <asm/io.h>
+ #include <asm/irq.h>
+ #include <asm/pgtable.h>

package/kernel/broadcom-wl/patches/100-fix_nvram_two_devices.patch

@@ -0,0 +1,32 @@
+--- a/driver/nvram_stub.c
++++ b/driver/nvram_stub.c
+@@ -22,6 +22,7 @@ typedef struct _vars {
+ #define	VARS_T_OH	sizeof(vars_t)
+ 
+ static vars_t *vars = NULL;
++static int nvram_init_done = 0;
+ extern char *nvram_buf[];
+ 
+ int
+@@ -33,6 +34,10 @@ BCMATTACHFN(nvram_init)(void *si)
+ 	uint nvs, bufsz;
+ 	vars_t *new;
+ 
++	nvram_init_done++;
++	if (nvram_init_done != 1)
++		return 0;
++
+ 	osh = si_osh(sih);
+ 
+ 	nvs = R_REG(osh, &nvh->len) - sizeof(struct nvram_header);
+@@ -79,6 +84,10 @@ BCMATTACHFN(nvram_exit)(void *si)
+ 	vars_t *this, *next;
+ 	si_t *sih;
+ 
++	nvram_init_done--;
++	if (nvram_init_done != 0)
++		return 0;
++
+ 	sih = (si_t *)si;
+ 	this = vars;
+ 	while (this) {

package/kernel/broadcom-wl/patches/110-add_number_to_dev_name.patch

@@ -0,0 +1,11 @@
+--- a/driver/wl_linux.c
++++ b/driver/wl_linux.c
+@@ -1412,7 +1412,7 @@ wl_alloc_if(wl_info_t *wl, int iftype, u
+ 	dev = alloc_etherdev(sizeof(wl_if_t));
+ 	wlif = netdev_priv(dev);
+ 	bzero(wlif, sizeof(wl_if_t));
+-	strncpy(dev->name, name, IFNAMSIZ);
++	snprintf(dev->name, IFNAMSIZ, name, subunit);
+ 
+ 	wlif->type = iftype;
+ 	wlif->dev = dev;

package/kernel/broadcom-wl/patches/910-fallback-sprom.patch

@@ -0,0 +1,84 @@
+--- a/driver/bcmsrom.c
++++ b/driver/bcmsrom.c
+@@ -39,6 +39,11 @@
+ #include <sbsdpcmdev.h>
+ #endif 
+ 
++#if defined(CONFIG_SSB_PCIHOST) && defined(CONFIG_BOARD_BCM963XX)
++#include <linux/ssb/ssb.h>
++extern struct ssb_sprom bcm63xx_sprom;
++#endif
++
+ #ifdef WLTEST
+ #include <sbsprom.h>
+ #endif /* WLTEST */
+@@ -2058,6 +2063,10 @@ BCMATTACHFN(initvars_srom_pci)(si_t *sih
+ 	bool flash = FALSE;
+ 	int err = 0;
+ 
++#if defined(CONFIG_SSB_PCIHOST) && defined(CONFIG_BOARD_BCM963XX)
++	char eabuf[18];
++#endif
++
+ 	/*
+ 	 * Apply CRC over SROM content regardless SROM is present or not,
+ 	 * and use variable <devpath>sromrev's existance in flash to decide
+@@ -2120,6 +2129,58 @@ BCMATTACHFN(initvars_srom_pci)(si_t *sih
+ 			goto varscont;
+ 		}
+ 
++#if defined(CONFIG_SSB_PCIHOST) && defined(CONFIG_BOARD_BCM963XX)
++		base = vp = MALLOC(osh, MAXSZ_NVRAM_VARS);
++
++		if( base != NULL )
++		{
++			varbuf_init(&b, base, MAXSZ_NVRAM_VARS);
++
++			printk("Got version %i SPROM from SSB\n", bcm63xx_sprom.revision);
++
++			varbuf_append(&b, vstr_sromrev, bcm63xx_sprom.revision);
++			varbuf_append(&b, vstr_boardrev, bcm63xx_sprom.board_rev);
++
++			/* ToDo: map bcm63xx_sprom.country_code */
++			varbuf_append(&b, vstr_noccode);
++
++			varbuf_append(&b, vstr_aa2g, bcm63xx_sprom.ant_available_bg);
++
++			varbuf_append(&b, vstr_pa0b[0], bcm63xx_sprom.pa0b0);
++			varbuf_append(&b, vstr_pa1b[0], bcm63xx_sprom.pa1b0);
++			varbuf_append(&b, vstr_pa0b[1], bcm63xx_sprom.pa0b1);
++			varbuf_append(&b, vstr_pa1b[1], bcm63xx_sprom.pa1b1);
++			varbuf_append(&b, vstr_pa0b[2], bcm63xx_sprom.pa0b2);
++			varbuf_append(&b, vstr_pa1b[2], bcm63xx_sprom.pa1b2);
++
++			varbuf_append(&b, vstr_pa0maxpwr, bcm63xx_sprom.maxpwr_bg);
++			varbuf_append(&b, vstr_pa0itssit, bcm63xx_sprom.itssi_bg);
++
++			varbuf_append(&b, vstr_boardflags, (bcm63xx_sprom.boardflags_hi << 16) | bcm63xx_sprom.boardflags_lo);
++			varbuf_append(&b, vstr_boardflags2, (bcm63xx_sprom.boardflags2_hi << 16) | bcm63xx_sprom.boardflags2_lo);
++
++			snprintf(eabuf, sizeof(eabuf), "%02x:%02x:%02x:%02x:%02x:%02x",
++				bcm63xx_sprom.il0mac[0], bcm63xx_sprom.il0mac[1], bcm63xx_sprom.il0mac[2],
++				bcm63xx_sprom.il0mac[3], bcm63xx_sprom.il0mac[4], bcm63xx_sprom.il0mac[5]
++			);
++
++			varbuf_append(&b, vstr_macaddr, eabuf);
++
++			/* final nullbyte terminator */
++			ASSERT(b.size >= 1);
++			vp = b.buf;
++			*vp++ = '\0';
++
++			ASSERT((vp - base) <= MAXSZ_NVRAM_VARS);
++			goto varsdone;
++		}
++		else
++		{
++			err = -2;
++			goto errout;
++		}
++#endif
++
+ 		BS_ERROR(("SROM CRC Error\n"));
+ 
+ #if defined(WLTEST)

package/kernel/broadcom-wl/patches/912-pci-bus-nvram-hack.patch

@@ -0,0 +1,11 @@
+--- a/driver/siutils.c
++++ b/driver/siutils.c
+@@ -1859,7 +1859,7 @@ BCMINITFN(si_devpath)(si_t *sih, char *p
+ 	case PCI_BUS:
+ 		ASSERT((SI_INFO(sih))->osh != NULL);
+ 		slen = snprintf(path, (size_t)size, "pci/%u/%u/",
+-		                OSL_PCI_BUS((SI_INFO(sih))->osh),
++		                OSL_PCI_BUS((SI_INFO(sih))->osh) + 1,
+ 		                OSL_PCI_SLOT((SI_INFO(sih))->osh));
+ 		break;
+ 	case PCMCIA_BUS:

package/kernel/broadcom-wl/patches/913-avoid-dbe-on-ifs_ctl-readw-hack.patch

@@ -0,0 +1,12 @@
+--- a/driver/linux_osl.c
++++ b/driver/linux_osl.c
+@@ -723,6 +723,9 @@ osl_readl(volatile uint32 *r)
+ uint16
+ osl_readw(volatile uint16 *r)
+ {
++	uint32 addr = (uintptr)r & 0xffff3fff;
++	if (addr == 0xa8000688)	/* ifs_ctl */
++		readl(r);
+ 	return (readw(r));
+ }
+