rockchip: add support for Radxa ZERO 3E and 3W
Radxa ZERO 3E and 3W are light, compact and tiny SBC[1][2] using the Rockchip RK3566. Hardware -------- - Rockchip RK3566 SoC - Quad A55 CPU - Mali-G52-2EE GPU - 1 TOPS @ INT8 NPU - 1GB/2GB/4GB/8G LPDDR4 RAM - Optional 8GB/16GB/32GB/64GB eMMC (3E) - Micro SD Card slot - 1x Gigabit ethernet port (supports PoE with add-on PoE HAT) (3E) - WiFi6/BT5.4 (3W) (not supported yet on OpenWrt) - 1x USB 3.0 Type-C HOST port - 1x USB 2.0 Type-C OTG port - Optional 40 Pin GPIO header [1] https://radxa.com/products/zeros/zero3e [2] https://radxa.com/products/zeros/zero3w Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://github.com/openwrt/openwrt/pull/16185 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
FUKAUMI Naoki
committed by
Hauke Mehrtens
Hauke Mehrtens
parent
8384c6d796
commit
59fc334ed0
@@ -201,6 +201,26 @@ define Device/radxa_rock-pi-s
|
||||
endef
|
||||
TARGET_DEVICES += radxa_rock-pi-s
|
||||
|
||||
define Device/radxa_zero-3e
|
||||
DEVICE_VENDOR := Radxa
|
||||
DEVICE_MODEL := ZERO 3E
|
||||
SOC := rk3566
|
||||
DEVICE_DTS := rockchip/rk3566-radxa-zero-3e
|
||||
UBOOT_DEVICE_NAME := radxa-zero-3-rk3566
|
||||
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
|
||||
endef
|
||||
TARGET_DEVICES += radxa_zero-3e
|
||||
|
||||
define Device/radxa_zero-3w
|
||||
DEVICE_VENDOR := Radxa
|
||||
DEVICE_MODEL := ZERO 3W
|
||||
SOC := rk3566
|
||||
DEVICE_DTS := rockchip/rk3566-radxa-zero-3w
|
||||
UBOOT_DEVICE_NAME := radxa-zero-3-rk3566
|
||||
DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis
|
||||
endef
|
||||
TARGET_DEVICES += radxa_zero-3w
|
||||
|
||||
define Device/sinovoip_bpi-r2-pro
|
||||
DEVICE_VENDOR := Sinovoip
|
||||
DEVICE_MODEL := Bananapi-R2 Pro
|
||||
|
||||
@@ -0,0 +1,657 @@
|
||||
From 1a5c8d307c83c808a32686ed51afb4bac2092d39 Mon Sep 17 00:00:00 2001
|
||||
From: Jonas Karlman <jonas@kwiboo.se>
|
||||
Date: Tue, 21 May 2024 20:28:05 +0000
|
||||
Subject: [PATCH] arm64: dts: rockchip: Add Radxa ZERO 3W/3E
|
||||
|
||||
The Radxa ZERO 3W/3E is an ultra-small, high-performance single board
|
||||
computer based on the Rockchip RK3566, with a compact form factor and
|
||||
rich interfaces.
|
||||
|
||||
The ZERO 3W and ZERO 3E are basically the same size and model, but
|
||||
differ only in storage and network interfaces.
|
||||
|
||||
- eMMC (3W)
|
||||
- SD-card (both)
|
||||
- Ethernet (3E)
|
||||
- WiFi/BT (3W)
|
||||
|
||||
Add initial support for eMMC, SD-card, Ethernet, HDMI and USB.
|
||||
|
||||
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
||||
Link: https://lore.kernel.org/r/20240521202810.1225636-3-jonas@kwiboo.se
|
||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||||
---
|
||||
arch/arm64/boot/dts/rockchip/Makefile | 2 +
|
||||
.../dts/rockchip/rk3566-radxa-zero-3.dtsi | 463 ++++++++++++++++++
|
||||
.../dts/rockchip/rk3566-radxa-zero-3e.dts | 51 ++
|
||||
.../dts/rockchip/rk3566-radxa-zero-3w.dts | 91 ++++
|
||||
4 files changed, 607 insertions(+)
|
||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts
|
||||
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -80,6 +80,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pi
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-zero-3e.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-zero-3w.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rock-3c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
||||
@@ -0,0 +1,463 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/leds/common.h>
|
||||
+#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
+#include "rk3566.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ aliases {
|
||||
+ mmc0 = &sdmmc0;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial2:1500000n8";
|
||||
+ };
|
||||
+
|
||||
+ hdmi-con {
|
||||
+ compatible = "hdmi-connector";
|
||||
+ type = "d";
|
||||
+
|
||||
+ port {
|
||||
+ hdmi_con_in: endpoint {
|
||||
+ remote-endpoint = <&hdmi_out_con>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&user_led2>;
|
||||
+
|
||||
+ led-green {
|
||||
+ color = <LED_COLOR_ID_GREEN>;
|
||||
+ default-state = "on";
|
||||
+ function = LED_FUNCTION_HEARTBEAT;
|
||||
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8: regulator-1v8-vcc {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc_1v8";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_1v8_p>;
|
||||
+ };
|
||||
+
|
||||
+ vcca_1v8: regulator-1v8-vcca {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcca_1v8";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_1v8_p>;
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_image: regulator-1v8-vcca-image {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcca1v8_image";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ vin-supply = <&vcc_1v8_p>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_3v3: regulator-3v3-vcc {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc_3v3";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <&vcc3v3_sys>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_sys: regulator-5v0-vcc-sys {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&combphy1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu1 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu2 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&cpu3 {
|
||||
+ cpu-supply = <&vdd_cpu>;
|
||||
+};
|
||||
+
|
||||
+&gpu {
|
||||
+ mali-supply = <&vdd_gpu_npu>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi {
|
||||
+ avdd-0v9-supply = <&vdda_0v9>;
|
||||
+ avdd-1v8-supply = <&vcca1v8_image>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi_in {
|
||||
+ hdmi_in_vp0: endpoint {
|
||||
+ remote-endpoint = <&vp0_out_hdmi>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&hdmi_out {
|
||||
+ hdmi_out_con: endpoint {
|
||||
+ remote-endpoint = <&hdmi_con_in>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&hdmi_sound {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&i2c0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ rk817: pmic@20 {
|
||||
+ compatible = "rockchip,rk817";
|
||||
+ reg = <0x20>;
|
||||
+ #clock-cells = <1>;
|
||||
+ clock-output-names = "rk817-clkout1", "rk817-clkout2";
|
||||
+ interrupt-parent = <&gpio0>;
|
||||
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pmic_int_l>;
|
||||
+ system-power-controller;
|
||||
+ wakeup-source;
|
||||
+
|
||||
+ vcc1-supply = <&vcc_sys>;
|
||||
+ vcc2-supply = <&vcc_sys>;
|
||||
+ vcc3-supply = <&vcc_sys>;
|
||||
+ vcc4-supply = <&vcc_sys>;
|
||||
+ vcc5-supply = <&vcc_sys>;
|
||||
+ vcc6-supply = <&vcc_sys>;
|
||||
+ vcc7-supply = <&vcc_sys>;
|
||||
+ vcc8-supply = <&vcc_sys>;
|
||||
+ vcc9-supply = <&vcc5v_midu>;
|
||||
+
|
||||
+ regulators {
|
||||
+ vdd_logic: DCDC_REG1 {
|
||||
+ regulator-name = "vdd_logic";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_gpu_npu: DCDC_REG2 {
|
||||
+ regulator-name = "vdd_gpu_npu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <500000>;
|
||||
+ regulator-max-microvolt = <1350000>;
|
||||
+ regulator-ramp-delay = <6001>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_ddr: DCDC_REG3 {
|
||||
+ regulator-name = "vcc_ddr";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_sys: DCDC_REG4 {
|
||||
+ regulator-name = "vcc3v3_sys";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-initial-mode = <0x2>;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3300000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcca1v8_pmu: LDO_REG1 {
|
||||
+ regulator-name = "vcca1v8_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <1800000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda_0v9: LDO_REG2 {
|
||||
+ regulator-name = "vdda_0v9";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdda0v9_pmu: LDO_REG3 {
|
||||
+ regulator-name = "vdda0v9_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <900000>;
|
||||
+ regulator-max-microvolt = <900000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <900000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vccio_acodec: LDO_REG4 {
|
||||
+ regulator-name = "vccio_acodec";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vccio_sd: LDO_REG5 {
|
||||
+ regulator-name = "vccio_sd";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc3v3_pmu: LDO_REG6 {
|
||||
+ regulator-name = "vcc3v3_pmu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3300000>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc_1v8_p: LDO_REG7 {
|
||||
+ regulator-name = "vcc_1v8_p";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc1v8_dvp: LDO_REG8 {
|
||||
+ regulator-name = "vcc1v8_dvp";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc2v8_dvp: LDO_REG9 {
|
||||
+ regulator-name = "vcc2v8_dvp";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <2800000>;
|
||||
+ regulator-max-microvolt = <2800000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vcc5v_midu: BOOST {
|
||||
+ regulator-name = "vcc5v_midu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vbus: OTG_SWITCH {
|
||||
+ regulator-name = "vbus";
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_cpu: regulator@40 {
|
||||
+ compatible = "rockchip,rk8600";
|
||||
+ reg = <0x40>;
|
||||
+ fcs,suspend-voltage-selector = <1>;
|
||||
+ regulator-name = "vdd_cpu";
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-min-microvolt = <712500>;
|
||||
+ regulator-max-microvolt = <1390000>;
|
||||
+ regulator-ramp-delay = <2300>;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2s0_8ch {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ leds {
|
||||
+ user_led2: user-led2 {
|
||||
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pmic {
|
||||
+ pmic_int_l: pmic-int-l {
|
||||
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pmu_io_domains {
|
||||
+ pmuio1-supply = <&vcc3v3_pmu>;
|
||||
+ pmuio2-supply = <&vcca1v8_pmu>;
|
||||
+ vccio1-supply = <&vccio_acodec>;
|
||||
+ vccio2-supply = <&vcc_1v8>;
|
||||
+ vccio3-supply = <&vccio_sd>;
|
||||
+ vccio4-supply = <&vcc_1v8>;
|
||||
+ vccio5-supply = <&vcc_3v3>;
|
||||
+ vccio6-supply = <&vcc_3v3>;
|
||||
+ vccio7-supply = <&vcc_3v3>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
+ vref-supply = <&vcca_1v8>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdmmc0 {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ disable-wp;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
+ vmmc-supply = <&vcc3v3_sys>;
|
||||
+ vqmmc-supply = <&vccio_sd>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&tsadc {
|
||||
+ rockchip,hw-tshut-mode = <1>;
|
||||
+ rockchip,hw-tshut-polarity = <0>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host0_xhci {
|
||||
+ dr_mode = "peripheral";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_host1_xhci {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0_host {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb2phy0_otg {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop {
|
||||
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vop_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vp0 {
|
||||
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
+ remote-endpoint = <&hdmi_in_vp0>;
|
||||
+ };
|
||||
+};
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts
|
||||
@@ -0,0 +1,51 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "rk3566-radxa-zero-3.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Radxa ZERO 3E";
|
||||
+ compatible = "radxa,zero-3e", "rockchip,rk3566";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &gmac1;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&gmac1 {
|
||||
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
+ clock_in_out = "input";
|
||||
+ phy-handle = <&rgmii_phy1>;
|
||||
+ phy-mode = "rgmii-id";
|
||||
+ phy-supply = <&vcc_3v3>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gmac1m1_miim
|
||||
+ &gmac1m1_tx_bus2
|
||||
+ &gmac1m1_rx_bus2
|
||||
+ &gmac1m1_rgmii_clk
|
||||
+ &gmac1m1_rgmii_bus
|
||||
+ &gmac1m1_clkinout>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mdio1 {
|
||||
+ rgmii_phy1: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <1>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gmac1_rstn>;
|
||||
+ reset-assert-us = <20000>;
|
||||
+ reset-deassert-us = <50000>;
|
||||
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ gmac1 {
|
||||
+ gmac1_rstn: gmac1-rstn {
|
||||
+ rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts
|
||||
@@ -0,0 +1,91 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+#include "rk3566-radxa-zero-3.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Radxa ZERO 3W";
|
||||
+ compatible = "radxa,zero-3w", "rockchip,rk3566";
|
||||
+
|
||||
+ aliases {
|
||||
+ mmc1 = &sdhci;
|
||||
+ mmc2 = &sdmmc1;
|
||||
+ };
|
||||
+
|
||||
+ sdio_pwrseq: sdio-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ clocks = <&rk817 1>;
|
||||
+ clock-names = "ext_clock";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_reg_on_h>;
|
||||
+ post-power-on-delay-ms = <100>;
|
||||
+ power-off-delay-us = <5000000>;
|
||||
+ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ bluetooth {
|
||||
+ bt_reg_on_h: bt-reg-on-h {
|
||||
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_wake_host_h: bt-wake-host-h {
|
||||
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ host_wake_bt_h: host-wake-bt-h {
|
||||
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ wifi {
|
||||
+ wifi_reg_on_h: wifi-reg-on-h {
|
||||
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ wifi_wake_host_h: wifi-wake-host-h {
|
||||
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&sdhci {
|
||||
+ bus-width = <8>;
|
||||
+ cap-mmc-highspeed;
|
||||
+ max-frequency = <200000000>;
|
||||
+ mmc-hs200-1_8v;
|
||||
+ no-sd;
|
||||
+ no-sdio;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
+ vmmc-supply = <&vcc_3v3>;
|
||||
+ vqmmc-supply = <&vcc_1v8>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sdmmc1 {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ cap-sdio-irq;
|
||||
+ keep-power-in-suspend;
|
||||
+ mmc-pwrseq = <&sdio_pwrseq>;
|
||||
+ no-mmc;
|
||||
+ no-sd;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
|
||||
+ sd-uhs-sdr104;
|
||||
+ vmmc-supply = <&vcc_3v3>;
|
||||
+ vqmmc-supply = <&vcc_1v8>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
+ uart-has-rtscts;
|
||||
+ status = "okay";
|
||||
+};
|
||||
@@ -0,0 +1,64 @@
|
||||
From 060c1950037e4c54ca4d8186a8f46269e35db901 Mon Sep 17 00:00:00 2001
|
||||
From: FUKAUMI Naoki <naoki@radxa.com>
|
||||
Date: Fri, 21 Jun 2024 07:44:35 +0900
|
||||
Subject: [PATCH] arm64: dts: rockchip: fix mmc aliases for Radxa ZERO 3E/3W
|
||||
|
||||
align with other Radxa products.
|
||||
|
||||
- mmc0 is eMMC
|
||||
- mmc1 is microSD
|
||||
|
||||
for ZERO 3E, there is no eMMC, but aliases should start at 0, so mmc0
|
||||
is microSD as exception.
|
||||
|
||||
Fixes: 1a5c8d307c83 ("arm64: dts: rockchip: Add Radxa ZERO 3W/3E")
|
||||
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
|
||||
|
||||
Changes in v3:
|
||||
- fix syntax error in rk3566-radxa-zero-3e.dts
|
||||
Changes in v2:
|
||||
- microSD is mmc0 instead of mmc1 for ZERO 3E
|
||||
|
||||
Link: https://lore.kernel.org/r/20240620224435.2752-1-naoki@radxa.com
|
||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||||
---
|
||||
arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi | 4 ----
|
||||
arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts | 1 +
|
||||
arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts | 3 ++-
|
||||
3 files changed, 3 insertions(+), 5 deletions(-)
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
||||
@@ -6,10 +6,6 @@
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
- aliases {
|
||||
- mmc0 = &sdmmc0;
|
||||
- };
|
||||
-
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3e.dts
|
||||
@@ -10,6 +10,7 @@
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
+ mmc0 = &sdmmc0;
|
||||
};
|
||||
};
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3w.dts
|
||||
@@ -9,7 +9,8 @@
|
||||
compatible = "radxa,zero-3w", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
- mmc1 = &sdhci;
|
||||
+ mmc0 = &sdhci;
|
||||
+ mmc1 = &sdmmc0;
|
||||
mmc2 = &sdmmc1;
|
||||
};
|
||||
|
||||
@@ -0,0 +1,101 @@
|
||||
From f7c742cbe664ebdedc075945e75443683d1175f7 Mon Sep 17 00:00:00 2001
|
||||
From: Trevor Woerner <twoerner@gmail.com>
|
||||
Date: Wed, 19 Jun 2024 21:32:49 -0400
|
||||
Subject: [PATCH] arm64: dts: rockchip: add gpio-line-names to radxa-zero-3
|
||||
|
||||
Add names to the pins of the general-purpose expansion header as given
|
||||
in the Radxa documentation[1] following the conventions in the kernel[2]
|
||||
to make it easier for users to correlate pins with functions when using
|
||||
utilities such as 'gpioinfo'.
|
||||
|
||||
[1] https://docs.radxa.com/en/zero/zero3/hardware-design/hardware-interface
|
||||
[2] https://www.kernel.org/doc/Documentation/devicetree/bindings/gpio/gpio.txt
|
||||
|
||||
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
|
||||
Link: https://lore.kernel.org/r/20240620013301.33653-1-twoerner@gmail.com
|
||||
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||||
---
|
||||
.../dts/rockchip/rk3566-radxa-zero-3.dtsi | 72 +++++++++++++++++++
|
||||
1 file changed, 72 insertions(+)
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
||||
@@ -105,6 +105,78 @@
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
+&gpio0 {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIO0_A0 - A7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO0_B0 - B7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO0_C0 - C7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO0_D0 - D7 */
|
||||
+ "pin-10 [GPIO0_D0]", "pin-08 [GPIO0_D1]", "",
|
||||
+ "", "", "", "", "";
|
||||
+};
|
||||
+
|
||||
+&gpio1 {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIO1_A0 - A7 */
|
||||
+ "pin-03 [GPIO1_A0]", "pin-05 [GPIO1_A1]", "",
|
||||
+ "", "pin-37 [GPIO1_A4]", "",
|
||||
+ "", "",
|
||||
+ /* GPIO1_B0 - B7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO1_C0 - C7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO1_D0 - D7 */
|
||||
+ "", "", "", "", "", "", "", "";
|
||||
+};
|
||||
+
|
||||
+&gpio2 {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIO2_A0 - A7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO2_B0 - B7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO2_C0 - C7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO2_D0 - D7 */
|
||||
+ "", "", "", "", "", "", "", "";
|
||||
+};
|
||||
+
|
||||
+&gpio3 {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIO3_A0 - A7 */
|
||||
+ "", "pin-11 [GPIO3_A1]", "pin-13 [GPIO3_A2]",
|
||||
+ "pin-12 [GPIO3_A3]", "pin-35 [GPIO3_A4]", "pin-40 [GPIO3_A5]",
|
||||
+ "pin-38 [GPIO3_A6]", "pin-36 [GPIO3_A7]",
|
||||
+ /* GPIO3_B0 - B7 */
|
||||
+ "pin-15 [GPIO3_B0]", "pin-16 [GPIO3_B1]", "pin-18 [GPIO3_B2]",
|
||||
+ "pin-29 [GPIO3_B3]", "pin-31 [GPIO3_B4]", "",
|
||||
+ "", "",
|
||||
+ /* GPIO3_C0 - C7 */
|
||||
+ "", "pin-22 [GPIO3_C1]", "pin-32 [GPIO3_C2]",
|
||||
+ "pin-33 [GPIO3_C3]", "pin-07 [GPIO3_C4]", "",
|
||||
+ "", "",
|
||||
+ /* GPIO3_D0 - D7 */
|
||||
+ "", "", "", "", "", "", "", "";
|
||||
+};
|
||||
+
|
||||
+&gpio4 {
|
||||
+ gpio-line-names =
|
||||
+ /* GPIO4_A0 - A7 */
|
||||
+ "", "", "", "", "", "", "", "",
|
||||
+ /* GPIO4_B0 - B7 */
|
||||
+ "", "", "pin-27 [GPIO4_B2]",
|
||||
+ "pin-28 [GPIO4_B3]", "", "", "", "",
|
||||
+ /* GPIO4_C0 - C7 */
|
||||
+ "", "", "pin-23 [GPIO4_C2]",
|
||||
+ "pin-19 [GPIO4_C3]", "", "pin-21 [GPIO4_C5]",
|
||||
+ "pin-24 [GPIO4_C6]", "",
|
||||
+ /* GPIO4_D0 - D7 */
|
||||
+ "", "", "", "", "", "", "", "";
|
||||
+};
|
||||
+
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_npu>;
|
||||
status = "okay";
|
||||
@@ -17,7 +17,7 @@ Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -105,4 +105,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-na
|
||||
@@ -107,4 +107,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-na
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
|
||||
@@ -6,6 +6,13 @@
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
+ aliases {
|
||||
+ led-boot = &led_green;
|
||||
+ led-failsafe = &led_green;
|
||||
+ led-running = &led_green;
|
||||
+ led-upgrade = &led_green;
|
||||
+ };
|
||||
+
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
@@ -26,12 +33,11 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_led2>;
|
||||
|
||||
- led-green {
|
||||
+ led_green: led-green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
- linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user