mediatek: filogic: add support for WAVLINK WL-WN573HX3

The WL-WN573HX3 is an AX3000 outdoor Access Point by WAVLINK, also sold in Europe as 7Links WLR-1300 (ZX-5612). Specifications: - MT7981B + MT7976 AX3000 2x2 DBDC (160 MHz) - 16 MiB SPI NOR, 256 MiB RAM - Gigabit ethernet port, 802.3af PoE - IP67 outdoor case for wall or pole mounting with four single band RP-SMA fiberglass antennas (8 dBi) Installation: - OEM Web UI is at 192.168.30.1 which will forward to http://netlogin.link (using a captive portal) - login with default password `admin` - skip setup wizard by navigating directly to http://netlogin.link/html/meshUpgrade.html - upload WN573HX3-sysupgrade.bin - reset to factory defaults to discard OEM UCI settings MAC address assignment: LAN 80:xx:xx:76:xx:25 hw 0x44e WLAN 2.4G 80:xx:xx:76:xx:27 factory 0x04 (label MAC) WLAN 5G 82:xx:xx:46:xx:27 pair key 8a:xx:xx:76:xx:27 also on label, not used by OpenWrt Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
2024-11-02 19:28:18 +01:00
parent 1227e5f54f
commit 907cb88e10
7 changed files with 217 additions and 3 deletions
--- a/target/linux/mediatek/dts/mt7981b-wavlink-wl-wn573hx3.dts
+++ b/target/linux/mediatek/dts/mt7981b-wavlink-wl-wn573hx3.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "mt7981.dtsi"
+
+/ {
+	model = "WAVLINK WL-WN573HX3";
+	compatible = "wavlink,wl-wn573hx3", "mediatek,mt7981";
+
+	aliases {
+		label-mac-device = &wifi;
+
+		led-boot = &led_status_blue;
+		led-failsafe = &led_status_blue;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_blue;
+
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_blue: led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	status = "okay";
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&int_gbe_phy>;
+		nvmem-cells = <&macaddr_hw_44e 0>;
+		nvmem-cell-names = "mac-address";
+	};
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_flash_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <52000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@00000 {
+				label = "bl2";
+				reg = <0x00000 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@50000 {
+				label = "factory";
+				reg = <0x50000 0xb0000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom_factory_0: eeprom@0 {
+						reg = <0x0 0x1000>;
+					};
+				};
+			};
+
+			partition@100000 {
+				label = "fip";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@f0000 {
+				compatible = "denx,fit";
+				label = "firmware";
+				reg = <0x180000 0xe00000>;
+			};
+
+			partition@f80000 {
+				label = "hw";
+				reg = <0xf80000 0x80000>;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_hw_44e: macaddr@44e {
+						compatible = "mac-base";
+						reg = <0x44e 0x11>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pio {
+	spi2_flash_pins: spi2-pins {
+		mux {
+			function = "spi";
+			groups = "spi2", "spi2_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+			drive-strength = <8>;
+			bias-pull-up = <103>;
+		};
+
+		conf-pd {
+			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+			drive-strength = <8>;
+			bias-pull-down = <103>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+};