diff --git a/target/linux/realtek/dts/rtl9303_vimin_vm-s100-0800ms.dts b/target/linux/realtek/dts/rtl9303_vimin_vm-s100-0800ms.dts new file mode 100644 index 0000000000..93f60d016d --- /dev/null +++ b/target/linux/realtek/dts/rtl9303_vimin_vm-s100-0800ms.dts @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl930x.dtsi" + +#include +#include +#include + +/ { + compatible = "vimin,vm-s100-0800ms", "realtek,rtl930x-soc"; + model = "Vimin VM-S100-0800MS"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, /* first 256 MiB */ + <0x20000000 0x10000000>; /* remaining 256 MiB */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2c_master: i2c@1b00036c { + compatible = "realtek,rtl9300-i2c"; + reg = <0x1b00036c 0x3c>; + #address-cells = <1>; + #size-cells = <0>; + scl-pin = <8>; + sda-pin = <9>; + clock-frequency = <100000>; + }; + + i2c-mux { + compatible = "realtek,i2c-mux-rtl9300"; + i2c-parent = <&i2c_master>; + #address-cells = <1>; + #size-cells = <0>; + + i2c0: i2c@0 { + reg = <0>; + scl-pin = <8>; + sda-pin = <9>; + }; + + i2c1: i2c@1 { + reg = <1>; + scl-pin = <8>; + sda-pin = <10>; + }; + + i2c2: i2c@2 { + reg = <2>; + scl-pin = <8>; + sda-pin = <11>; + }; + + i2c3: i2c@3 { + reg = <3>; + scl-pin = <8>; + sda-pin = <12>; + }; + + i2c4: i2c@4 { + reg = <4>; + scl-pin = <8>; + sda-pin = <13>; + }; + + i2c5: i2c@5 { + reg = <5>; + scl-pin = <8>; + sda-pin = <14>; + }; + + i2c6: i2c@6 { + reg = <6>; + scl-pin = <8>; + sda-pin = <15>; + }; + + i2c7: i2c@7 { + reg = <7>; + scl-pin = <8>; + sda-pin = <16>; + }; + }; + + keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + led_set { + compatible = "realtek,rtl9300-leds"; + active-low; + + /* + * LED set 0 + * + * - LED[0](Green): 10M/100M/1G/2.5G/5G/10G/LINK/ACT + */ + led_set0 = <0x0bab>; + }; + + sfp0: sfp-p1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2900>; + #thermal-sensor-cells = <0>; + }; + + sfp1: sfp-p2 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <1500>; + #thermal-sensor-cells = <0>; + }; + + sfp2: sfp-p3 { + compatible = "sff,sfp"; + i2c-bus = <&i2c2>; + los-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <1500>; + #thermal-sensor-cells = <0>; + }; + + sfp3: sfp-p4 { + compatible = "sff,sfp"; + i2c-bus = <&i2c3>; + los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + #thermal-sensor-cells = <0>; + }; + + sfp4: sfp-p5 { + compatible = "sff,sfp"; + i2c-bus = <&i2c4>; + los-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + #thermal-sensor-cells = <0>; + }; + + sfp5: sfp-p6 { + compatible = "sff,sfp"; + i2c-bus = <&i2c5>; + los-gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 22 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <1500>; + #thermal-sensor-cells = <0>; + }; + + sfp6: sfp-p7 { + compatible = "sff,sfp"; + i2c-bus = <&i2c6>; + los-gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <1500>; + #thermal-sensor-cells = <0>; + }; + + sfp7: sfp-p8 { + compatible = "sff,sfp"; + i2c-bus = <&i2c7>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2900>; + #thermal-sensor-cells = <0>; + }; +}; + +&mdio_aux { + status = "okay"; + + gpio1: gpio@0 { + compatible = "realtek,rtl8231"; + reg = <0>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio1 0 0 37>; + + led-controller { + compatible = "realtek,rtl8231-leds"; + status = "disabled"; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xe0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x10000>; + }; + + partition@f0000 { + label = "u-boot-env2"; + reg = <0xf0000 0x10000>; + read-only; + }; + + partition@100000 { + label = "jffs"; + reg = <0x100000 0x100000>; + }; + + partition@200000 { + label = "jffs2"; + reg = <0x200000 0x100000>; + }; + + partition@300000 { + label = "firmware"; + reg = <0x300000 0xd00000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x93000000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY_SDS(0, 2) + INTERNAL_PHY_SDS(8, 3) + INTERNAL_PHY_SDS(16, 4) + INTERNAL_PHY_SDS(20, 5) + INTERNAL_PHY_SDS(24, 6) + INTERNAL_PHY_SDS(25, 7) + INTERNAL_PHY_SDS(26, 8) + INTERNAL_PHY_SDS(27, 9) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + pseudo-phy-handle = <&phy0>; + phy-mode = "10gbase-r"; + sfp = <&sfp0>; + managed = "in-band-status"; + led-set = <0>; + }; + + port@8 { + reg = <8>; + label = "lan2"; + pseudo-phy-handle = <&phy8>; + phy-mode = "10gbase-r"; + sfp = <&sfp1>; + managed = "in-band-status"; + led-set = <0>; + }; + + port@10 { + reg = <16>; + label = "lan3"; + pseudo-phy-handle = <&phy16>; + phy-mode = "10gbase-r"; + sfp = <&sfp2>; + managed = "in-band-status"; + led-set = <0>; + }; + + port@14 { + reg = <20>; + label = "lan4"; + pseudo-phy-handle = <&phy20>; + phy-mode = "10gbase-r"; + sfp = <&sfp3>; + managed = "in-band-status"; + led-set = <0>; + }; + + port@18 { + reg = <24>; + label = "lan5"; + pseudo-phy-handle = <&phy24>; + phy-mode = "10gbase-r"; + sfp = <&sfp4>; + managed = "in-band-status"; + led-set = <0>; + }; + + port@19 { + reg = <25>; + label = "lan6"; + pseudo-phy-handle = <&phy25>; + phy-mode = "10gbase-r"; + sfp = <&sfp5>; + managed = "in-band-status"; + led-set = <0>; + }; + + port@1a { + reg = <26>; + label = "lan7"; + pseudo-phy-handle = <&phy26>; + phy-mode = "10gbase-r"; + sfp = <&sfp6>; + managed = "in-band-status"; + led-set = <0>; + }; + + port@1b { + reg = <27>; + label = "lan8"; + pseudo-phy-handle = <&phy27>; + phy-mode = "10gbase-r"; + sfp = <&sfp7>; + managed = "in-band-status"; + led-set = <0>; + }; + + port@1c { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <10000>; + full-duplex; + }; + }; + }; +}; + +&thermal_zones { + sfp-thermal { + polling-delay-passive = <10000>; + polling-delay = <10000>; + thermal-sensors = <&sfp0>, <&sfp1>, <&sfp2>, <&sfp3>, <&sfp4>, <&sfp5>, <&sfp6>, <&sfp7>; + trips { + sfp-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; +}; diff --git a/target/linux/realtek/image/Makefile b/target/linux/realtek/image/Makefile index 39c834b773..786dd12710 100644 --- a/target/linux/realtek/image/Makefile +++ b/target/linux/realtek/image/Makefile @@ -119,6 +119,19 @@ define Device/Default append-metadata endef +define Device/kernel-lzma + KERNEL := \ + kernel-bin | \ + append-dtb | \ + lzma | \ + uImage lzma + KERNEL_INITRAMFS := \ + kernel-bin | \ + append-dtb | \ + lzma | \ + uImage lzma +endef + define Device/uimage-rt-loader KERNEL/rt-loader := kernel-bin | append-dtb | rt-compress | rt-loader KERNEL := $$(KERNEL/rt-loader) | uImage none diff --git a/target/linux/realtek/image/rtl930x.mk b/target/linux/realtek/image/rtl930x.mk index 44940c5c1c..436a67d848 100644 --- a/target/linux/realtek/image/rtl930x.mk +++ b/target/linux/realtek/image/rtl930x.mk @@ -29,6 +29,16 @@ define Device/tplink_tl-st1008f_v2 endef TARGET_DEVICES += tplink_tl-st1008f_v2 +define Device/vimin_vm-s100-0800ms + SOC := rtl9303 + UIMAGE_MAGIC := 0x93000000 + DEVICE_VENDOR := Vimin + DEVICE_MODEL := VM-S100-0800MS + IMAGE_SIZE := 13312k + $(Device/kernel-lzma) +endef +TARGET_DEVICES += vimin_vm-s100-0800ms + define Device/xikestor_sks8300-8x SOC := rtl9303 DEVICE_VENDOR := XikeStor