qualcommax: ipq60xx: add TP-Link EAP610-Outdoor support
TP-Link EAP610-Outdoor is a 802.11ax AP claiming AX1800 support. It is
wall or pole mountable, and rated for outdoor use. It can only be
powered via PoE.
Specifications:
---------------
* CPU: Qualcomm IPQ6018 Quad core Cortex-A53
* RAM: 512 MB
* Storage: ESMT PSR1GA30DT 128MB NAND
* Ethernet:
* Gigabit RJ45 port with PoE input
* WLAN:
* 2.4GHz/5GHz
* LEDs:
* Multi-color System LED (Green/Amber)
* Buttons:
* 1x Reset
* UART: 4-pin unpopulated header
* 1.8 V level, Pinout 1 - TX, 2 - RX, 3 - GND, 4 - 1.8V
Installation:
=============
Web UI method
-------------
Set up the device using the vendor's web UI. After that go to
Management->SSH and enable the "SSH Login" checkbox. Select "Save".
The connect to the machine via SSH:
ssh -o hostkeyalgorithms=ssh-rsa <ip_of_device>
Disable signature verification:
cliclientd stopcs
Rename the "-web-ui-factory" image to something less than 63
characters, maintaining the ".bin" suffix.
* Go to System -> Firmware Update.
* Under "New Firmware File", click "Browse" and select the image
* Select "Update" and confirm by clicking "OK".
If the update fails, the web UI should show an error message.
Otherwise, the device should reboot into OpenWRT.
TFTP method
-----------
To flash via tftp, first place the initramfs image on the TFTP server.
setenv serverip <ip of tftp server>
setenv ipaddr <ip in same subnet as tftp server>
tftpboot tplink_eap610-outdoor-initramfs-uImage.itb
bootm
This should boot OpenWRT. Once booted, flash the sysupgrade.bin image
using either luci or the commandline.
The tplink2022 image format
============================
The vendor images of this device are packaged in a format that does
not match any previous tplink formats. In order for flashing to work
from the vendor's web UI, firmware updates need to be packaged in
this format. The `tplink-mkimage-2022.py` is provided for this
purpose.
This script can also analyze vendor images, and extract the required
"support" string. This string is checked by the vendor firmware, and
images with a missing or incorrect string are rejected.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14922
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Alexandru Gagniuc
committed by
Robert Marko
Robert Marko
parent
3f87c5ac42
commit
a00ff9f6d1
@@ -0,0 +1,151 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq6018.dtsi"
|
||||
#include "ipq6018-cp-cpu.dtsi"
|
||||
#include "ipq6018-ess.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "TP-Link EAP610-Outdoor";
|
||||
compatible = "tplink,eap610-outdoor", "qcom,ipq6018";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart3;
|
||||
led-boot = &led_sys_green;
|
||||
led-failsafe = &led_sys_amber;
|
||||
led-running = &led_sys_green;
|
||||
led-upgrade = &led_sys_amber;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-append = " ubi.block=0,rootfs root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_sys_amber: led-0 {
|
||||
function = "system";
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_sys_green: led-1 {
|
||||
function = "system";
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-restart {
|
||||
compatible = "gpio-restart";
|
||||
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
|
||||
open-source;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart3 {
|
||||
pinctrl-0 = <&serial_3_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
mdio_pins: mdio-pins {
|
||||
mdc {
|
||||
pins = "gpio64";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio65";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_enable {
|
||||
gpio-hog;
|
||||
output-high;
|
||||
gpios = <36 GPIO_ACTIVE_HIGH>;
|
||||
line-name = "enable-leds";
|
||||
};
|
||||
};
|
||||
|
||||
&dp5 {
|
||||
phy-handle = <&rtl8211f_4>;
|
||||
phy-mode = "sgmii";
|
||||
label = "lan";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <10000>;
|
||||
reset-post-delay-us = <50000>;
|
||||
status = "okay";
|
||||
|
||||
rtl8211f_4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
switch_lan_bmp = <ESS_PORT5>;
|
||||
switch_mac_mode1 = <MAC_MODE_SGMII_CHANNEL0>;
|
||||
status = "okay";
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@4 {
|
||||
port_id = <5>;
|
||||
phy_address = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
ieee80211-freq-limit = <2402000 5835000>;
|
||||
qcom,ath11k-calibration-variant = "TP-Link-EAP610-Outdoor";
|
||||
status = "okay";
|
||||
};
|
||||
@@ -68,6 +68,24 @@ define Device/qihoo_360v6
|
||||
endef
|
||||
TARGET_DEVICES += qihoo_360v6
|
||||
|
||||
define Device/tplink_eap610-outdoor
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := EAP610-Outdoor
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
SOC := ipq6018
|
||||
DEVICE_PACKAGES := ipq-wifi-tplink_eap610-outdoor
|
||||
IMAGES += web-ui-factory.bin
|
||||
IMAGE/web-ui-factory.bin := append-ubi | tplink-image-2022
|
||||
TPLINK_SUPPORT_STRING := SupportList: \
|
||||
EAP610-Outdoor(TP-Link|UN|AX1800-D):1.0 \
|
||||
EAP610-Outdoor(TP-Link|JP|AX1800-D):1.0 \
|
||||
EAP610-Outdoor(TP-Link|CA|AX1800-D):1.0
|
||||
endef
|
||||
TARGET_DEVICES += tplink_eap610-outdoor
|
||||
|
||||
define Device/yuncore_fap650
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
|
||||
@@ -23,6 +23,9 @@ ipq60xx_setup_interfaces()
|
||||
qihoo,360v6)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
||||
;;
|
||||
tplink,eap610-outdoor)
|
||||
ucidef_set_interface_lan "lan" "dhcp"
|
||||
;;
|
||||
linksys,mr7350|\
|
||||
yuncore,fap650)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
@@ -51,6 +54,10 @@ ipq60xx_setup_macs()
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
tplink,eap610-outdoor)
|
||||
label_mac=$(get_mac_binary /tmp/factory_data/default-mac 0)
|
||||
lan_mac=$label_mac
|
||||
;;
|
||||
esac
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||
|
||||
@@ -32,6 +32,13 @@ case "$FIRMWARE" in
|
||||
ath11k_patch_mac $(macaddr_add $label_mac 2) 1
|
||||
ath11k_set_macflag
|
||||
;;
|
||||
tplink,eap610-outdoor)
|
||||
caldata_from_file "/tmp/factory_data/radio" 0 0x10000
|
||||
label_mac=$(get_mac_binary /tmp/factory_data/default-mac 0)
|
||||
ath11k_patch_mac $label_mac 1
|
||||
ath11k_patch_mac $(macaddr_add $label_mac 1) 0
|
||||
ath11k_set_macflag
|
||||
;;
|
||||
yuncore,fap650)
|
||||
caldata_extract "0:art" 0x1000 0x20000
|
||||
;;
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
#!/bin/sh
|
||||
|
||||
preinit_mount_factory_data() {
|
||||
local mtd_path
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
case $(board_name) in
|
||||
tplink,eap610-outdoor)
|
||||
mtd_path=$(find_mtd_chardev "factory_data")
|
||||
ubiattach --dev-path="$mtd_path" --devn=1
|
||||
mkdir /tmp/factory_data
|
||||
mount -o ro,noatime -t ubifs ubi1:ubi_factory_data /tmp/factory_data
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
boot_hook_add preinit_main preinit_mount_factory_data
|
||||
@@ -4,6 +4,79 @@ REQUIRE_IMAGE_METADATA=1
|
||||
RAMFS_COPY_BIN='fw_printenv fw_setenv head'
|
||||
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||
|
||||
remove_oem_ubi_volume() {
|
||||
local oem_volume_name="$1"
|
||||
local oem_ubivol
|
||||
local mtdnum
|
||||
local ubidev
|
||||
|
||||
mtdnum=$(find_mtd_index "$CI_UBIPART")
|
||||
if [ ! "$mtdnum" ]; then
|
||||
return
|
||||
fi
|
||||
|
||||
ubidev=$(nand_find_ubi "$CI_UBIPART")
|
||||
if [ ! "$ubidev" ]; then
|
||||
ubiattach --mtdn="$mtdnum"
|
||||
ubidev=$(nand_find_ubi "$CI_UBIPART")
|
||||
fi
|
||||
|
||||
if [ "$ubidev" ]; then
|
||||
oem_ubivol=$(nand_find_volume "$ubidev" "$oem_volume_name")
|
||||
[ "$oem_ubivol" ] && ubirmvol "/dev/$ubidev" --name="$oem_volume_name"
|
||||
fi
|
||||
}
|
||||
|
||||
tplink_get_boot_part() {
|
||||
local cur_boot_part
|
||||
local args
|
||||
|
||||
# Try to find rootfs from kernel arguments
|
||||
read -r args < /proc/cmdline
|
||||
for arg in $args; do
|
||||
local ubi_mtd_arg=${arg#ubi.mtd=}
|
||||
case "$ubi_mtd_arg" in
|
||||
rootfs|rootfs_1)
|
||||
echo "$ubi_mtd_arg"
|
||||
return
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
||||
# Fallback to u-boot env (e.g. when running initramfs)
|
||||
cur_boot_part="$(/usr/sbin/fw_printenv -n tp_boot_idx)"
|
||||
case $cur_boot_part in
|
||||
1)
|
||||
echo rootfs_1
|
||||
;;
|
||||
0|*)
|
||||
echo rootfs
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
tplink_do_upgrade() {
|
||||
local new_boot_part
|
||||
|
||||
case $(tplink_get_boot_part) in
|
||||
rootfs)
|
||||
CI_UBIPART="rootfs_1"
|
||||
new_boot_part=1
|
||||
;;
|
||||
rootfs_1)
|
||||
CI_UBIPART="rootfs"
|
||||
new_boot_part=0
|
||||
;;
|
||||
esac
|
||||
|
||||
fw_setenv -s - <<-EOF
|
||||
tp_boot_idx $new_boot_part
|
||||
EOF
|
||||
|
||||
remove_oem_ubi_volume ubi_rootfs
|
||||
nand_do_upgrade "$1"
|
||||
}
|
||||
|
||||
platform_check_image() {
|
||||
return 0;
|
||||
}
|
||||
@@ -55,6 +128,9 @@ platform_do_upgrade() {
|
||||
qihoo,360v6)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
tplink,eap610-outdoor)
|
||||
tplink_do_upgrade "$1"
|
||||
;;
|
||||
yuncore,fap650)
|
||||
[ "$(fw_printenv -n owrt_env_ver 2>/dev/null)" != "7" ] && yuncore_fap650_env_setup
|
||||
local active="$(fw_printenv -n owrt_slotactive 2>/dev/null)"
|
||||
|
||||
Reference in New Issue
Block a user