ar71xx: Add support for MikroTik RB951Ui-2HnD
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/ for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been abandoned because it wasn't generated and sent to the mailing list correctly and doesn't apply as a result. I have cleaned up this patch. When testing this on real hardware, I also noticed that wireless didn't work, so this patch fixes that as well. This patch applies cleanly to SVN 39392. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Patchwork: http://patchwork.openwrt.org/patch/4773/ [juhosg: - drop the 'rb951ui_wlan_init' function and rework the code to use the recently introduced rb95x_wlan_init function instead, - fix GPIO number of the port5 LED, - rename LEDs according to the standard LED naming conventions, and use 'rb' prefix in the names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39641
This commit is contained in:
		| @@ -36,6 +36,7 @@ | ||||
| #include "dev-wmac.h" | ||||
| #include "machtypes.h" | ||||
| #include "routerboot.h" | ||||
| #include "dev-leds-gpio.h" | ||||
|  | ||||
| #define RB95X_GPIO_NAND_NCE	14 | ||||
|  | ||||
| @@ -58,6 +59,38 @@ static struct mtd_partition rb95x_nand_partitions[] = { | ||||
| 	}, | ||||
| }; | ||||
|  | ||||
| static struct gpio_led rb951ui_leds_gpio[] __initdata = { | ||||
| 	{ | ||||
| 		.name		= "rb:green:wlan", | ||||
| 		.gpio		= 11, | ||||
| 		.active_low	= 1, | ||||
| 	}, { | ||||
| 		.name		= "rb:green:act", | ||||
| 		.gpio		= 3, | ||||
| 		.active_low	= 1, | ||||
| 	}, { | ||||
| 		.name		= "rb:green:port1", | ||||
| 		.gpio		= 13, | ||||
| 		.active_low	= 1, | ||||
| 	}, { | ||||
| 		.name		= "rb:green:port2", | ||||
| 		.gpio		= 12, | ||||
| 		.active_low	= 1, | ||||
| 	}, { | ||||
| 		.name		= "rb:green:port3", | ||||
| 		.gpio		= 4, | ||||
| 		.active_low	= 1, | ||||
| 	}, { | ||||
| 		.name		= "rb:green:port4", | ||||
| 		.gpio		= 21, | ||||
| 		.active_low	= 1, | ||||
| 	}, { | ||||
| 		.name		= "rb:green:port5", | ||||
| 		.gpio		= 16, | ||||
| 		.active_low	= 1, | ||||
| 	} | ||||
| }; | ||||
|  | ||||
| static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = { | ||||
| 	.mode = AR8327_PAD_MAC_RGMII, | ||||
| 	.txclk_delay_en = true, | ||||
| @@ -157,6 +190,14 @@ static int __init rb95x_setup(void) | ||||
|  | ||||
| 	rb95x_nand_init(); | ||||
|  | ||||
| 	return 0; | ||||
| } | ||||
|  | ||||
| static void __init rb951g_setup(void) | ||||
| { | ||||
| 	if (rb95x_setup()) | ||||
| 		return; | ||||
|  | ||||
| 	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | | ||||
| 				   AR934X_ETH_CFG_SW_ONLY_MODE); | ||||
|  | ||||
| @@ -171,17 +212,47 @@ static int __init rb95x_setup(void) | ||||
|  | ||||
| 	ath79_register_eth(0); | ||||
|  | ||||
| 	return 0; | ||||
| } | ||||
|  | ||||
| static void __init rb951g_setup(void) | ||||
| { | ||||
| 	if (rb95x_setup()) | ||||
| 		return; | ||||
|  | ||||
| 	rb95x_wlan_init(); | ||||
| 	ath79_register_usb(); | ||||
| } | ||||
|  | ||||
| MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD", | ||||
| 	     rb951g_setup); | ||||
|  | ||||
| static void __init rb951ui_setup(void) | ||||
| { | ||||
| 	if (rb95x_setup()) | ||||
| 		return; | ||||
|  | ||||
| 	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); | ||||
|  | ||||
| 	ath79_register_mdio(1, 0x0); | ||||
|  | ||||
| 	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); | ||||
| 	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); | ||||
|  | ||||
| 	ath79_switch_data.phy4_mii_en = 1; | ||||
| 	ath79_switch_data.phy_poll_mask = BIT(4); | ||||
| 	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; | ||||
| 	ath79_eth0_data.phy_mask = BIT(4); | ||||
| 	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; | ||||
| 	ath79_register_eth(0); | ||||
|  | ||||
| 	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; | ||||
| 	ath79_register_eth(1); | ||||
|  | ||||
| 	gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, | ||||
| 			 "USB power"); | ||||
|  | ||||
| 	gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, | ||||
| 			 "POE power"); | ||||
|  | ||||
| 	rb95x_wlan_init(); | ||||
| 	ath79_register_usb(); | ||||
|  | ||||
| 	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio), | ||||
| 				 rb951ui_leds_gpio); | ||||
| } | ||||
|  | ||||
| MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD", | ||||
| 	     rb951ui_setup); | ||||
|   | ||||
| @@ -0,0 +1,10 @@ | ||||
| --- a/arch/mips/ath79/machtypes.h | ||||
| +++ b/arch/mips/ath79/machtypes.h | ||||
| @@ -81,6 +81,7 @@ enum ath79_mach_type { | ||||
|  	ATH79_MACH_RB_751,		/* MikroTik RouterBOARD 751 */ | ||||
|  	ATH79_MACH_RB_751G,		/* Mikrotik RouterBOARD 751G */ | ||||
|  	ATH79_MACH_RB_951G,		/* Mikrotik RouterBOARD 951G */ | ||||
| +	ATH79_MACH_RB_951U,		/* Mikrotik RouterBOARD 951Ui-2HnD */ | ||||
|  	ATH79_MACH_RB_2011G,		/* Mikrotik RouterBOARD 2011UAS-2HnD */ | ||||
|  	ATH79_MACH_RB_2011L,		/* Mikrotik RouterBOARD 2011L */ | ||||
|  	ATH79_MACH_RB_2011US,		/* Mikrotik RouterBOARD 2011UAS */ | ||||
		Reference in New Issue
	
	Block a user
	 Gabor Juhos
					Gabor Juhos