domenico/openwrt-R7800-nss
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mediatek: filogic: add Netcore N60 Pro support

Browse Source 
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: M16U4G16256A DDR4 512MB
Ethernet: 2x 2.5G + 3x 1G
USB: 1x USB 3.0
WiFi1: MT7975N 2.4GHz 4T4R
WiFi2: MT7975PN 5GHz 4T4R
Button: Reset, WPS
Power: DC 12V 2A

Flash instructions:

    Connect to the router using ssh or telnet,
    username: useradmin, password is the web
    login password of the router.
    Use scp to upload bl31-uboot.fip and flash:
    "mtd write xxx-bl31-uboot.fip FIP"
    "mtd erase ubi"
    Connect to the router via the Lan port,
    set a static ip of your PC.
    (ip 192.168.1.254, gateway 192.168.1.1)
    Download initramfs image, reboot router,
    waiting for tftp recovery to complete.
    After openwrt boots up, perform sysupgrade.

Note:

    Back up all mtd partitions before flashing.

Signed-off-by: Yujie Zhu <libriunc@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18138
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Yujie Zhu
2025-04-08 22:51:55 +08:00
committed by Hauke Mehrtens
parent 779f730914
commit db3eff1022
9 changed files with 811 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

370
target/linux/mediatek/dts/mt7986a-netcore-n60-pro.dts Normal file
View File

@@ -0,0 +1,370 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "mt7986a.dtsi"
/ {
model = "Netcore N60 Pro";
compatible = "netcore,n60-pro", "mediatek,mt7986a";
aliases {
serial0 = &uart0;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &gmac0;
};
chosen {
bootargs = "root=/dev/fit0 rootwait";
rootdisk = <&ubi_rootdisk>;
stdout-path = "serial0:115200n8";
};
memory@40000000 {
reg = <0 0x40000000 0 0x20000000>;
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
};
button-mesh {
label = "mesh";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led_power: led-1 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_POWER;
gpios = <&pio 29 GPIO_ACTIVE_LOW>;
};
led-2 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_USB;
gpios = <&pio 30 GPIO_ACTIVE_LOW>;
};
led-3 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WPS;
gpios = <&pio 31 GPIO_ACTIVE_LOW>;
};
led-4 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN;
gpios = <&pio 32 GPIO_ACTIVE_LOW>;
};
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "fixed-5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
};
&crypto {
status = "okay";
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
nvmem-cells = <&macaddr_factory_1fef20>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-handle = <&phy6>;
phy-mode = "2500base-x";
nvmem-cells = <&macaddr_factory_1fef26>;
nvmem-cell-names = "mac-address";
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
};
};
&mdio {
reset-delay-us = <600>;
reset-post-delay-us = <20000>;
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
phy5: phy@5 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <5>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@3 {
reg = <3>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
};
};
};
phy6: phy@6 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <6>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@3 {
reg = <3>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
};
};
};
switch: switch@1f {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
};
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@5 {
reg = <5>;
label = "lan1";
phy-mode = "2500base-x";
phy-handle = <&phy5>;
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
flash@0 {
compatible = "spi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <20000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bl2";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "factory";
reg = <0x180000 0x200000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_1fef20: macaddr@1fef20 {
reg = <0x1fef20 0x6>;
};
macaddr_factory_1fef26: macaddr@1fef26 {
reg = <0x1fef26 0x6>;
};
};
};
partition@380000 {
label = "fip";
reg = <0x380000 0x200000>;
read-only;
};
partition@580000 {
label = "ubi";
reg = <0x0580000 0x7a80000>;
compatible = "linux,ubi";
volumes {
ubi_rootdisk: ubi-volume-fit {
volname = "fit";
};
};
};
};
};
};
&pio {
spi_flash_pins: spi-flash-pins-33-to-38 {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
conf-pd {
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
drive-strength = <8>;
mediatek,pull-down-adv = <0>; /* bias-disable */
};
};
wf_2g_5g_pins: wf_2g_5g-pins {
mux {
function = "wifi";
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
};
&ssusb {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_5v>;
status = "okay";
};
&trng {
status = "okay";
};
&uart0 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
pinctrl-names = "default";
pinctrl-0 = <&wf_2g_5g_pins>;
status = "okay";
};

5
target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
View File

@@ -82,6 +82,11 @@ mercusys,mr90x-v1-ubi)
netcore,n60)
ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:green:wan" "eth1" "link tx rx"
;;
netcore,n60-pro)
ucidef_set_led_netdev "lan1" "LAN1" "mdio-bus:05:green:lan" "lan1" "link tx rx"
ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:06:green:wan" "eth1" "tx rx"
ucidef_set_led_netdev "wanlink" "WANLINK" "blue:wan" "eth1" "link"
;;
netgear,wax220)
ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
;;

1
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View File

@@ -49,6 +49,7 @@ mediatek_setup_interfaces()
jdcloud,re-cp-03|\
mediatek,mt7981-rfb|\
netcore,n60|\
netcore,n60-pro|\
nradio,c8-668gl|\
ruijie,rg-x60-pro|\
unielec,u7981-01*|\

3
target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
View File

@@ -105,7 +105,8 @@ case "$board" in
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
;;
jcg,q30-pro|\
netcore,n60)
netcore,n60|\
netcore,n60-pro)
# Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
# addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress

1
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
View File

@@ -85,6 +85,7 @@ platform_do_upgrade() {
nokia,ea0326gmp|\
openwrt,one|\
netcore,n60|\
netcore,n60-pro|\
qihoo,360t7|\
routerich,ax3000-ubootmod|\
tplink,tl-xdr4288|\

24
target/linux/mediatek/image/filogic.mk
View File

@@ -1287,6 +1287,30 @@ define Device/netcore_n60
endef
TARGET_DEVICES += netcore_n60
define Device/netcore_n60-pro
DEVICE_VENDOR := Netcore
DEVICE_MODEL := N60 Pro
DEVICE_DTS := mt7986a-netcore-n60-pro
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot netcore_n60-pro
endef
TARGET_DEVICES += netcore_n60-pro
define Device/netgear_wax220
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX220