domenico/openwrt-R7800-nss
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

kernel: bump 5.4 to 5.4.45

Browse Source 
Fixes CVE-2020-10757 via upstream commit df4988aa1c96 ("mm: Fix mremap
not considering huge pmd devmap").

Resolved merge conflict in the following patches:

 bcm27xx: 950-0128-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch

Refreshed patches, removed upstreamed patch:

 generic: 751-v5.8-net-dsa-mt7530-set-CPU-port-to-fallback-mode.patch
 generic: 754-v5.7-net-dsa-mt7530-fix-roaming-from-DSA-user-ports.patch

Run tested: qemu-x86-64
Build tested: x86/64, imx6, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Petr Štetiar
2020-06-09 14:18:25 +02:00
parent df6a33a8d4
commit e5aa498acb
30 changed files with 352 additions and 596 deletions
Download Patch File Download Diff File Expand all files Collapse all files

268
target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch
View File

File diff suppressed because it is too large Load Diff

2
target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch
View File

@@ -1,6 +1,6 @@
--- a/drivers/crypto/inside-secure/safexcel.c
+++ b/drivers/crypto/inside-secure/safexcel.c
@@ -595,6 +595,14 @@
@@ -595,6 +595,14 @@ static int safexcel_hw_init(struct safex
val |= EIP197_MST_CTRL_TX_MAX_CMD(5);
writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
}

38
target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch
View File

@@ -78,23 +78,21 @@ Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
drivers/net/dsa/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index c7667645f04a..467f80157acf 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -33,12 +33,12 @@ config NET_DSA_LANTIQ_GSWIP
the xrx200 / VR9 SoC.
config NET_DSA_MT7530
- tristate "Mediatek MT7530 Ethernet switch support"
+ tristate "MediaTek MT7530 and MT7621 Ethernet switch support"
depends on NET_DSA
select NET_DSA_TAG_MTK
---help---
- This enables support for the Mediatek MT7530 Ethernet switch
- chip.
+ This enables support for the MediaTek MT7530 and MT7621 Ethernet
+ switch chip.
config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -33,12 +33,12 @@ config NET_DSA_LANTIQ_GSWIP
the xrx200 / VR9 SoC.
config NET_DSA_MT7530
- tristate "Mediatek MT7530 Ethernet switch support"
+ tristate "MediaTek MT7530 and MT7621 Ethernet switch support"
depends on NET_DSA
select NET_DSA_TAG_MTK
---help---
- This enables support for the Mediatek MT7530 Ethernet switch
- chip.
+ This enables support for the MediaTek MT7530 and MT7621 Ethernet
+ switch chip.
config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"

12
target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch
View File

@@ -84,10 +84,8 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
drivers/net/dsa/mt7530.h | 29 ++++-
2 files changed, 203 insertions(+), 57 deletions(-)
Index: linux-5.4.43/drivers/net/dsa/mt7530.c
===================================================================
--- linux-5.4.43.orig/drivers/net/dsa/mt7530.c
+++ linux-5.4.43/drivers/net/dsa/mt7530.c
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -373,7 +373,7 @@ mt7530_fdb_write(struct mt7530_priv *pri
}
@@ -389,10 +387,8 @@ Index: linux-5.4.43/drivers/net/dsa/mt7530.c
if (priv->id == ID_MT7530) {
priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
Index: linux-5.4.43/drivers/net/dsa/mt7530.h
===================================================================
--- linux-5.4.43.orig/drivers/net/dsa/mt7530.h
+++ linux-5.4.43/drivers/net/dsa/mt7530.h
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -11,7 +11,7 @@
#define MT7530_NUM_FDB_RECORDS 2048
#define MT7530_ALL_MEMBERS 0xff

198
target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch
View File

@@ -79,103 +79,101 @@ Signed-off-by: Landen Chao <landen.chao@mediatek.com>
.../devicetree/bindings/net/dsa/mt7530.txt | 77 ++++++++++++++++++-
1 file changed, 74 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index c5ed5d25f642..dc226a4e402a 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible: may be compatible = "mediatek,mt7530"
or compatible = "mediatek,mt7621"
+ or compatible = "mediatek,mt7531"
- #address-cells: Must be 1.
- #size-cells: Must be 0.
- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
@@ -32,10 +33,13 @@ Required properties for the child nodes within ports container:
- reg: Port address described must be 6 for CPU port and from 0 to 5 for
user ports.
-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
- "cpu".
+- phy-mode: String, the follow value would be acceptable for port labeled "cpu"
+ If compatible mediatek,mt7530 or mediatek,mt7621 is set,
+ must be either "trgmii" or "rgmii"
+ If compatible mediatek,mt7531 is set,
+ must be either "sgmii", "1000base-x" or "2500base-x"
-Port 5 of the switch is muxed between:
+Port 5 of mt7530 and mt7621 switch is muxed between:
1. GMAC5: GMAC5 can interface with another external MAC or PHY.
2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
of the SOC. Used in many setups where port 0/4 becomes the WAN port.
@@ -308,3 +312,70 @@ Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
};
};
};
+
+Example 4:
+
+&eth {
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ &mdio0 {
+ switch@0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+ reset-gpios = <&pio 54 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible: may be compatible = "mediatek,mt7530"
or compatible = "mediatek,mt7621"
+ or compatible = "mediatek,mt7531"
- #address-cells: Must be 1.
- #size-cells: Must be 0.
- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
@@ -32,10 +33,13 @@ Required properties for the child nodes
- reg: Port address described must be 6 for CPU port and from 0 to 5 for
user ports.
-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
- "cpu".
+- phy-mode: String, the follow value would be acceptable for port labeled "cpu"
+ If compatible mediatek,mt7530 or mediatek,mt7621 is set,
+ must be either "trgmii" or "rgmii"
+ If compatible mediatek,mt7531 is set,
+ must be either "sgmii", "1000base-x" or "2500base-x"
-Port 5 of the switch is muxed between:
+Port 5 of mt7530 and mt7621 switch is muxed between:
1. GMAC5: GMAC5 can interface with another external MAC or PHY.
2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
of the SOC. Used in many setups where port 0/4 becomes the WAN port.
@@ -308,3 +312,70 @@ Example 3: MT7621: Port 5 is connected t
};
};
};
+
+Example 4:
+
+&eth {
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ &mdio0 {
+ switch@0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+ reset-gpios = <&pio 54 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };

18
target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
View File

@@ -87,10 +87,8 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com>
drivers/net/dsa/mt7530.h | 144 +++++++++
3 files changed, 784 insertions(+), 9 deletions(-)
Index: linux-5.4.43/drivers/net/dsa/Kconfig
===================================================================
--- linux-5.4.43.orig/drivers/net/dsa/Kconfig
+++ linux-5.4.43/drivers/net/dsa/Kconfig
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -33,12 +33,12 @@ config NET_DSA_LANTIQ_GSWIP
the xrx200 / VR9 SoC.
@@ -107,10 +105,8 @@ Index: linux-5.4.43/drivers/net/dsa/Kconfig
config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"
Index: linux-5.4.43/drivers/net/dsa/mt7530.c
===================================================================
--- linux-5.4.43.orig/drivers/net/dsa/mt7530.c
+++ linux-5.4.43/drivers/net/dsa/mt7530.c
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -234,6 +234,12 @@ mt7530_write(struct mt7530_priv *priv, u
}
@@ -882,10 +878,8 @@ Index: linux-5.4.43/drivers/net/dsa/mt7530.c
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, mt7530_of_match);
Index: linux-5.4.43/drivers/net/dsa/mt7530.h
===================================================================
--- linux-5.4.43.orig/drivers/net/dsa/mt7530.h
+++ linux-5.4.43/drivers/net/dsa/mt7530.h
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -14,6 +14,7 @@
enum mt753x_id {
ID_MT7530 = 0,

120
target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch
View File

@@ -77,64 +77,62 @@ Signed-off-by: Landen Chao <landen.chao@mediatek.com>
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 83e10591e0e5..ffacefee8e2a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -143,6 +143,56 @@
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+ reset-gpios = <&pio 54 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan0";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+
};
};
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -150,6 +150,56 @@
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
+
+ switch@0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+ reset-gpios = <&pio 54 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "wan";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan0";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan2";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+
};
};