mediatek: add ABT ASR3000 support
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, Mesh
Power: DC 12V 1A
Gain telnet access:
1. Login into web interface, and download the configuration.
2. Decode and uncompress the configuration:
* Enter fakeroot if you are not login as root.
base64 -d e-xxxxxxxxxxxx-cfg.tar.gz | tar -zx
3. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'.
4. Edit 'etc/rc.local', insert telnetd command before 'exit 0':
( sleep 3s; /usr/sbin/telnetd; ) &
5. Repack the configuration:
tar -zc etc/ | base64 > e-xxxxxxxxxxxx-cfg.tar.gz
6. Upload new configuration via web interface, now you can connect to
ASR3000 via telnet.
Flash instructions:
1. Connect to ASR3000, backup everything, especially 'Factory' part.
2. Write new BL2:
mtd write openwrt-mediatek-filogic-abt_asr3000-preloader.bin BL2
3. Write new FIP:
mtd write openwrt-mediatek-filogic-abt_asr3000-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/15887
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Tianling Shen
committed by
Hauke Mehrtens
Hauke Mehrtens
parent
93ead910dc
commit
f2f428c699
275
target/linux/mediatek/dts/mt7981b-abt-asr3000.dts
Normal file
275
target/linux/mediatek/dts/mt7981b-abt-asr3000.dts
Normal file
@@ -0,0 +1,275 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "mt7981.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ABT ASR3000";
|
||||
compatible = "abt,asr3000", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
led-boot = &mesh_led;
|
||||
led-failsafe = &mesh_led;
|
||||
led-upgrade = &mesh_led;
|
||||
label-mac-device = &gmac1;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
rootdisk = <&ubi_rootdisk>;
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0 0x40000000 0 0x10000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-mesh {
|
||||
label = "mesh";
|
||||
linux,code = <BTN_9>;
|
||||
linux,input-type = <EV_SW>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
mesh_led: led-2 {
|
||||
label = "green:mesh";
|
||||
gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
function = LED_FUNCTION_WLAN_2GHZ;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
function = LED_FUNCTION_WLAN_5GHZ;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
nvmem-cells = <&macaddr_art_0 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
switch: switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>; /* bias-disable */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bl2";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "art";
|
||||
reg = <0x180000 0x100000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x0 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@280000 {
|
||||
label = "factory";
|
||||
reg = <0x280000 0x100000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "fip";
|
||||
reg = <0x380000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
compatible = "linux,ubi";
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x7a80000>;
|
||||
|
||||
volumes {
|
||||
ubi_rootdisk: ubi-volume-fit {
|
||||
volname = "fit";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
status = "okay";
|
||||
};
|
||||
@@ -6,6 +6,11 @@ board=$(board_name)
|
||||
board_config_update
|
||||
|
||||
case $board in
|
||||
abt,asr3000)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan-2ghz" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan-5ghz" "phy1-ap0"
|
||||
;;
|
||||
confiabits,mt7981)
|
||||
ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" "link tx rx"
|
||||
ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" "link tx rx"
|
||||
|
||||
@@ -11,6 +11,13 @@ mediatek_setup_interfaces()
|
||||
acelink,ew-7886cax)
|
||||
ucidef_set_interface_lan "eth0" "dhcp"
|
||||
;;
|
||||
abt,asr3000|\
|
||||
cmcc,rax3000m|\
|
||||
h3c,magic-nx30-pro|\
|
||||
nokia,ea0326gmp|\
|
||||
zbtlink,zbt-z8103ax)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
|
||||
;;
|
||||
acer,predator-w6)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
|
||||
;;
|
||||
@@ -46,12 +53,6 @@ mediatek_setup_interfaces()
|
||||
bananapi,bpi-r4-poe)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 eth1" "wan eth2"
|
||||
;;
|
||||
cmcc,rax3000m|\
|
||||
h3c,magic-nx30-pro|\
|
||||
nokia,ea0326gmp|\
|
||||
zbtlink,zbt-z8103ax)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
|
||||
;;
|
||||
comfast,cf-e393ax)
|
||||
ucidef_set_interfaces_lan_wan "lan1" eth1
|
||||
;;
|
||||
|
||||
@@ -10,6 +10,13 @@ PHYNBR=${DEVPATH##*/phy}
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
abt,asr3000)
|
||||
# Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
|
||||
# addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
|
||||
addr=$(cat /sys/class/net/eth1/address)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $addr > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
acer,predator-w6)
|
||||
key_path="/var/qcidata/data"
|
||||
[ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress
|
||||
|
||||
@@ -64,6 +64,22 @@ platform_do_upgrade() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
abt,asr3000|\
|
||||
bananapi,bpi-r3|\
|
||||
bananapi,bpi-r3-mini|\
|
||||
bananapi,bpi-r4|\
|
||||
bananapi,bpi-r4-poe|\
|
||||
cmcc,rax3000m|\
|
||||
jdcloud,re-cp-03|\
|
||||
mediatek,mt7988a-rfb|\
|
||||
nokia,ea0326gmp|\
|
||||
openwrt,one|\
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088|\
|
||||
xiaomi,redmi-router-ax6000-ubootmod)
|
||||
fit_do_upgrade "$1"
|
||||
;;
|
||||
acer,predator-w6|\
|
||||
smartrg,sdg-8612|\
|
||||
smartrg,sdg-8614|\
|
||||
@@ -82,21 +98,6 @@ platform_do_upgrade() {
|
||||
CI_KERNPART="linux"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
bananapi,bpi-r3|\
|
||||
bananapi,bpi-r3-mini|\
|
||||
bananapi,bpi-r4|\
|
||||
bananapi,bpi-r4-poe|\
|
||||
cmcc,rax3000m|\
|
||||
jdcloud,re-cp-03|\
|
||||
mediatek,mt7988a-rfb|\
|
||||
nokia,ea0326gmp|\
|
||||
openwrt,one|\
|
||||
tplink,tl-xdr4288|\
|
||||
tplink,tl-xdr6086|\
|
||||
tplink,tl-xdr6088|\
|
||||
xiaomi,redmi-router-ax6000-ubootmod)
|
||||
fit_do_upgrade "$1"
|
||||
;;
|
||||
cudy,re3000-v1|\
|
||||
cudy,wr3000-v1|\
|
||||
yuncore,ax835)
|
||||
|
||||
@@ -105,6 +105,30 @@ define Build/cetron-header
|
||||
rm $@.tmp
|
||||
endef
|
||||
|
||||
define Device/abt_asr3000
|
||||
DEVICE_VENDOR := ABT
|
||||
DEVICE_MODEL := ASR3000
|
||||
DEVICE_DTS := mt7981b-abt-asr3000
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_IN_UBI := 1
|
||||
UBOOTENV_IN_UBI := 1
|
||||
IMAGES := sysupgrade.itb
|
||||
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
||||
KERNEL := kernel-bin | gzip
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
IMAGE/sysupgrade.itb := append-kernel | \
|
||||
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
||||
ARTIFACTS := preloader.bin bl31-uboot.fip
|
||||
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
||||
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot abt_asr3000
|
||||
endef
|
||||
TARGET_DEVICES += abt_asr3000
|
||||
|
||||
define Device/acelink_ew-7886cax
|
||||
DEVICE_VENDOR := Acelink
|
||||
DEVICE_MODEL := EW-7886CAX
|
||||
|
||||
Reference in New Issue
Block a user