ath79: add support for 8Devices Carambola3 board
Carambola3 is a WiFi module based on Qualcomm/Atheros QCA4531 http://wiki.8devices.com/carambola3 Specification: - 650/600/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 32 MB of FLASH - 2T2R 2.4 GHz - 2x 10/100 Mbps Ethernet - 1x USB 2.0 Host socket - UART for serial console - 12x GPIO Flash instructions: Upgrading from ar71xx target: - Upload image into the board: scp openwrt-ath79-generic-8dev_carambola3-squashfs-sysupgrade.bin \ root@192.168.1.1/tmp/ - Run sysupgrade sysupgrade -F /tmp/openwrt-ath79-generic-8dev_carambola3-squashfs-sysupgrade.bin Upgrading from u-boot: - Set up tftp server with openwrt-ath79-generic-8dev_carambola3-initramfs-kernel.bin - Go to u-boot (reboot and press ESC when prompted) - Set TFTP server IP setenv serverip 192.168.1.254 - Set device ip from the same subnet setenv ipaddr 192.168.1.1 - Copy new firmware to board tftpboot 0x82000000 initramfs.bin - Boot OpenWRT bootm 0x82000000 - Upload image openwrt-ath79-generic-8dev_carambola3-squashfs-sysupgrade.bin into the board - Run sysupgrade. Signed-off-by: Andrey Bondar <a.bondar@8devices.com> Link: https://github.com/openwrt/openwrt/pull/15514 Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
committed by
Robert Marko
parent
3e024022c3
commit
febcfadc80
@@ -204,6 +204,16 @@ define Device/8dev_carambola2
|
||||
endef
|
||||
TARGET_DEVICES += 8dev_carambola2
|
||||
|
||||
define Device/8dev_carambola3
|
||||
SOC := qca9531
|
||||
DEVICE_VENDOR := 8devices
|
||||
DEVICE_MODEL := Carambola3
|
||||
DEVICE_PACKAGES := kmod-usb2
|
||||
IMAGE_SIZE := 32768k
|
||||
SUPPORTED_DEVICES += carambola3
|
||||
endef
|
||||
TARGET_DEVICES += 8dev_carambola3
|
||||
|
||||
define Device/8dev_lima
|
||||
SOC := qca9531
|
||||
DEVICE_VENDOR := 8devices
|
||||
|
||||
Reference in New Issue
Block a user