An additional bit is needed to enable 256-QAM support. Feature that is
already supported in ath10k-ct driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Permit to configure vht_capab also for 2.4GHz 802.11n mode to support
non-standard QAM-256 on 802.11n.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for QAM-256 in 2.4GHz 802.11n. This is non-standard and
comunicate vht capabilities in 2.4GHz 802.11n permittin, for supported
clients, to benefits for additional data rate.
Many driver supports this, for a start enable this for ath10k and
ath11k.
Before I can get to work a feed repository that work i have included
qca-nss source needed on this commit
Source author: SqTER-PL <r.napierala@asta-net.pl>
6953f19 wireless-regdb: Update regulatory info for Indonesia (ID) for 2025
2e8214e wireless-regdb: Permit 320 MHz bandwidth in 6 GHz band for GB
a94f685 wireless-regdb: Update regulatory info for Egypt (EG) for 2024
7628ce2 wireless-regdb: Update regulatory rules for Brazil (BR) on 6GHz
4411b39 wireless-regdb: Update regulatory info for Vietnam (VN) for 2025
490f136 wireless-regdb: Update regulatory info for Estonia (EE) for 2024
c56c663 wireless-regdb: update regulatory rules for Paraguay (PY) on 6 GHz for 2025
5a8ced5 wireless-regdb: Update regulatory info for CEPT countries for 6GHz listed by WiFi Alliance
5fd8ee3 wireless-regdb: update regulatory rules for Bosnia and Herzegovina (BA) for 6 GHz
e05260a wireless-regdb: update regulatory database based on preceding changes
Link: https://github.com/openwrt/openwrt/pull/19474
(cherry picked from commit 7fe06b7f56)
Link: https://github.com/openwrt/openwrt/pull/19538
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Correctly load the list of basic_rates from UCI. basic-rates shall be
stored as a option-list. The current code did not retrieve this list
correctly.
wpa_supplicant uses a different config option to set basic-rates
when operating in mesh-mode.
Use the correct config key and calculation for mesh-interfaces.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit a854d833ea)
5d10084ea885 lib-ucode.c: add #define _GNU_SOURCE
a95364b41d52 udebug-cli: fix terminating uloop
c00eb9b685a8 ucode: use FILE handle for pcap output
4265167cb6e8 ucode: add error reporting to pcap_write
4a908ee731a6 udebug-cli: stop event loop on write failure
6e04f4187231 ucode: use ucv_resource_create_ex for remote rings
c297f04e1852 ucode: drop use ucv_resource_create
f207d37a1055 ucode: add support for specifying ring format
98683a94bcdd ucode: support appending array data, similar to socket.send()
a7ecd483ed38 ucode: allow calling udebug.init() multiple times
d4a4c788c416 ucode: fix allocation size of local ring meta
184706abaf50 ucode: add timestamp argument to foreach()
8442c948c193 ucode: add function for getting ring information
f4958a4c591a ucode: add const entries for enum udebug_format
14d4fec36993 udebug-cli: add logstream command
6ed8536142bb ucode: fix entries/size confusion
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 7b0ce213e9)
27839f854a58 ubusd: make txq_len field signed
b35b2bc63e8e ubusd: treat EACCES on write like EAGAIN
713e9d19b2b6 ubusd: retry write on EINTR
8bb523ab20e0 ubusd: fix txq_len accounting
b1b783c74742 ubusd: add another tx attempt on enqueueing the first message for a client
5952b48e251c ubusd: do not call socket callback from ubus_msg_send
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 90cd8640bd)
(cherry picked from commit d9cd67b542)
This allows us to use the full size of nand, which increases ubi size
from 64M to 122.25M.
If you are at factory firmware, please refer commit 63b8d98dd0 ("mediatek: add support for Cudy TR3000 v1")
to boot into OpenWrt initramfs (stock layout).
Flash instructions:
1. Login into the device and backup everything, especially 'Factory' part.
1. Unlock mtd partitions:
opkg update && opkg install kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
3. Write new BL2 and FIP
mtd write openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-preloader.bin BL2
mtd write openwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Tested-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 6f8c58bfd8)
[sync uboot defconfigs with 24.10 branch, change apk to opkg]
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/18945
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
hostapd_neighbor_set_own_report is normally called from interface setup only.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 9850052190)
Ensure that hapd->own_addr is set properly, since hostapd_setup_bss
only handles it for secondary BSS interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 3ebf110711)
61ae5732adea iprule: amend ipproto netlink nla_put_u32 to nla_put_u8
d610d68c71b8 device: add support for configuring vrf
a1b6386a20a6 device: fix bonding primary port selection
e8bbf246ce2e system-linux: fix sysfs name for all_ports_active flag
723c699e84f4 Restore disable_ipv6 sysctl after removing a device from bridge or bond
d476e18e8d43 iprule: resolve ipproto by name
7901e66c5f27 netifd: iprule add sport and dport
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 15c2ca0a83)
Link: https://github.com/openwrt/openwrt/pull/19125
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
A previous commit backported the ipq-wifi update to fix support for the
TP-Link Archer C6 v2 by adding the device to the package. However, it
missed adding the required TARGET_ath79 dependency, causing the
ipq-tplink_archer-c6-v2 build to fail.
The dependency was previously added in commit 4990ce613b ("ipq-wifi:
update to 2024-02-17") when several ath79 devices were introduced.
However, since this backport only fixes support for the Archer C6 v2, it
is not feasible to backport all related changes. Therefore, this commit
adds only the missing dependency to resolve the build issue without
pulling in unrelated updates.
Fixes: 0c43acc349 ("ipq-wifi: update to Git HEAD (2025-05-30)")
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://github.com/openwrt/openwrt/pull/19120
Signed-off-by: Robert Marko <robimarko@gmail.com>
Hold a reference to the defer resource as long as it is still needed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 87bfde67f2)
567207a9bf16 fs: implement fileno() on directory handles
eb1d93235509 fs: support passing directory handle or fd in chdir()
38a2254337f1 build: detect whether toolchain employs default source fortification
6eddfc9dff17 resolv: fix fd leak in send_queries
3d36856b2dc5 uci: fix memory leak on cursor() error
aafde95f1ecf uci: add cursor() flags argument
d8cebc5a6bfd Revert "WIP: lib: support map() over objects"
2599cf80736b zlib: incorporate latest PR changes
830f316a7e49 socker: let sock.peercred() clear error on success
4cbac141406e types: rename u64_to_constant flag to ext_flag
d802fe5da5cd types: add support for resources with embedded data/values
71b4fdc6f60b types: add support for setting resource persistent flag
141f799eba08 uloop: use container_of instead of direct pointer casts
1396f8f2988d uloop: use uc_fn_thisval
9a121fc7440c uloop: drop object_registry
11b804d97086 socket: do not clear last_error in socket.error()
d5b3a9dc1091 socket: add strerror() method
Fixes: https://github.com/jow-/ucode/issues/285
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 2a9316fbfb)
Add kernel package for DesignWare I2C platform controller.
This controller is used on the RP1 SoC found on RPi 5 devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 84922a1e34)
The ENC28J60 is a 10 Mbps half-duplex Ethernet controller interfaced via SPI.
It achieves real-world bandwidth up to 5Mbit/s on devices like the RPi Zero due
to SPI limits.
Commonly used with Raspberry Pi Zero boards for wired network connectivity.
Signed-off-by: Albrecht Lohofener <albrechtloh@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19048
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 4987239913)
Add kernel packages for DesignWare SPI core and MMIO controllers.
This is needed for the RP1 SoC found on RPi 5 devices.
Tested with a Microchip ENC28J60 Ethernet controller on a RPi 5.
Signed-off-by: Albrecht Lohofener <albrechtloh@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19049
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 82d20a0fbd)
Rework the generation of the index.json version of the package
indexes to match the original intent (i.e., for use by the ASU
server and other downstream projects). The current file contains
package names that have ABI versioning, making them unusable by ASU,
so we now remove the ABI suffixes.
Also adds a 'version' field to the json, so downstream utilities
can detect the new semantics of the package name fields.
Links: 218ce40cd7
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19051
(cherry picked from commit 2b0b16f1d1)
Link: https://github.com/openwrt/openwrt/pull/19097
Signed-off-by: Robert Marko <robimarko@gmail.com>
