domenico/openwrt-R7800-nss
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
62,729 Commits 7 Branches 2 Tags
efebdf077cb21b76124f492d048b84c4e63c1e2c
Commit Graph

4844 Commits

Author SHA1 Message Date
Álvaro Fernández Rojas
35e02b31c0 generic: add missing CONFIG_LEDS_KTD202X symbol 
Commit 56d97fff55 backported leds-ktd202x from upstream but didn't add the
generic config symbol.

Fixes: 56d97fff55 ("generic: backport support for KTD2026/7 rgb(w) led controller")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17396
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit c846f48f6a)
 2025-01-01 23:14:31 +01:00
George Oldfort
a9ddc7432a generic: backport support for KTD2026/7 rgb(w) led controller 
This commit adds the Linux kernel mainline driver "leds-ktd202x" for the
KinetIC KTD2026 and KTD2027 RGB/RBGW controller with I2C interface that was
introduced in kernel version 6.7, last changed in mainline on 2024-05-31.

At least the Acer Connect Vero W6m (a variant of the Acer Predator Connect
W6 without 2.5G eth1 port, usb3 port, and the 6 on-board gpio RGB LEDs) is
equipped with a KTD2026 (and a single RGB LED attached to it used by the
stock firmware as status LED), and maybe other router devices also are.

Signed-off-by: George Oldfort <openwrt@10099.de>
Link: https://github.com/openwrt/openwrt/pull/16860
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 56d97fff55)
 2025-01-01 23:14:31 +01:00
John Audia
67e070c11b kernel: bump 6.6 to 6.6.68 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.68

All patches automatically rebased.

Build system: x86/64
Build-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64
Run-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/17394
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 1aae1dfaf2)
 2024-12-30 20:21:40 +01:00
Antonio Pastor
76a546a83a kernel: generic: patch: 802.2+LLC - set transport_header offset 
Conversion to DSA broke 802.2+LLC+SNAP packet processing. Frames
received by napi_complete_done with GRO and DSA have transport_header
set two bytes short, or pointing 2 bytes before network_header &
skb->data. As snap_rcv expects transport_header to point to SNAP
header (OID:PID) after LLC processing advances offset over LLC header
(llc_rcv & llc_fixup_skb), code doesn't find a match and packet is
dropped.

Image built at this commit operates properly:
  86dadeba48 - generic: add patch for GPON-ONU-34-20BI quirk
Image built at following commit exhibits the issue:
  337e36e0ef - ipq806x: convert each device to DSA implementation

As issue is LLC specific, to avoid impacting non-LLC traffic, and to
follow up on original assumption made on kernel commit fda55eca5a33
("net: introduce skb_transport_header_was_set()") stating "network
stacks usually reset the transport header anyway", llc_fixup_skb to
reset and advance the offset. llc_fixup_skb already assumes the LLC
header is at skb->data, and by definition SNAP header immediately
follows.

Signed-off-by: Antonio Pastor <antonio.pastor@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17220
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit da7ab64f1f)
 2024-12-28 11:18:36 +01:00
Hauke Mehrtens
f94c3af814 kernel: generic: netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext 
Fix kernel panic on some 64 bit architectures.

This patch is pending upstream.
https://patchwork.ozlabs.org/project/netfilter-devel/patch/20241222100239.336289-1-pablo@netfilter.org/

Fixes: https://github.com/openwrt/openwrt/issues/17336
Link: https://github.com/openwrt/openwrt/pull/17340
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 4585d5abd9)
 2024-12-22 18:48:34 +01:00
John Audia
4111210b27 kernel: bump 6.6 to 6.6.67 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.67

All patches automatically rebased.

Build system: x86/64
Build-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64
Run-tested: flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/17309
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit efe9fb0846)
 2024-12-22 18:01:51 +01:00
Marco von Rosenberg
8667ca841b generic: fix BCM54612E suspend/resume backport patch 
This backport patch inserted suspend/resume callbacks
for the wrong PHY driver.
The fixed patch is needed for Huawei AP5030DN
to initialize its second PHY.

Refresh all affected patch with make target/linux/refresh.

Fixes: 06cdc07f8c ("ath79: add support for Huawei AP5030DN")
Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
Link: https://github.com/openwrt/openwrt/pull/17312
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit d7f638bc69)
 2024-12-20 19:36:33 +01:00
John Audia
21549dbf7b kernel: bump 6.6 to 6.6.66 
Update patch set for new release and add required kernel option
CONFIG_ZRAM_TRACK_ENTRY_ACTIME to generic config

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.66

Manually rebased:
	bcm27xx/patches-6.6/950-0092-MMC-added-alternative-MMC-driver.patch
	bcm53xx/patches-6.6/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
	starfive/patches-6.6/1000-serial-8250_dw-Add-starfive-jh7100-hsuart-compatible.patch

Removed upstreamed:
	bcm27xx/patches-6.6/950-0029-vc4_hdmi-Avoid-log-spam-for-audio-start-failure.patch[1]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.66&id=e0388a95736abd1f5f5a94221dd1ac24eacbd4d7

Build system: x86/64
Build-tested: bcm27xx/bcm2712, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64
Run-tested: bcm27xx/bcm2712, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3, x86/64

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/17271
(cherry picked from commit 28f534d953)
Link: https://github.com/openwrt/openwrt/pull/17302
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-12-19 11:22:12 +01:00
John Audia
6d0d4ce72f kernel: generic: tg3: Fix DMA allocations on 57766 devices 
At the request of rsalvaterra, add this patch to fix an issue
affecting tg3 ethernet interfaces[1].

1. https://github.com/openwrt/openwrt/pull/17271#issuecomment-2543836518

Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/17282
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit a3c484c3b9)
 2024-12-16 01:10:42 +01:00
John Audia
9af0e94fa6 kernel: bump 6.6 to 6.6.64 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.64

Manually rebased:
	generic/hack-6.6/780-usb-net-MeigLink_modem_support.patch
	bcm27xx/patches-6.6/950-0585-drm-vc4-Introduce-generation-number-enum.patch
	bcm27xx/patches-6.6/950-0610-drm-vc4-hvs-Support-BCM2712-HVS.patch
	bcm27xx/patches-6.6/950-0829-vc4-hvs-Add-support-for-D0-register-changes.patch

Removed upstreamed:
	bcm27xx/patches-6.6/950-0597-drm-vc4-hdmi-Avoid-hang-with-debug-registers-when-su.patch[1]
	bcm27xx/patches-6.6/950-0599-drm-vc4-Fix-dlist-debug-not-resetting-the-next-entry.patch[2]
	bcm27xx/patches-6.6/950-0600-drm-vc4-Remove-incorrect-limit-from-hvs_dlist-debugf.patch[3]
	bcm27xx/patches-6.6/950-0708-drm-vc4-Correct-logic-on-stopping-an-HVS-channel.patch[4]
	ramips/patches-6.6/002-01-v6.13-clk-ralink-mtmips-fix-clock-plan-for-Ralink-SoC-RT38.patch[5]
	ramips/patches-6.6/002-02-v6.13-clk-ralink-mtmips-fix-clocks-probe-order-in-oldest-r.patch[6]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=223ee2567a55e4f80315c768d2969e6a3b9fb23d
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=8182b5ca19c6f173b6498d1c6d3e4b034b76bbde
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=52c1716f65a558174e381360bd88f18dae4be85c
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=9728b508b01a5eeeac79ceb676364c674dd951ac
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=f85a1d06afbcc57ac44176db8f9d7a934979952c
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.64&id=fbb13732c6ffa9d58cedafabcd5ce8fd7ef8ae5a

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Co-authored-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/17217
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 5158e28769)
 2024-12-15 01:43:39 +01:00
Bohdan Chubuk
45f9f15512 generic: mtd: spinand: add support for FORESEE F35SQA001G 
Add support for FORESEE F35SQA001G SPI NAND.

Similar to F35SQA002G, but differs in capacity.
Datasheet:
  -  https://cdn.ozdisan.com/ETicaret_Dosya/704795_871495.pdf

Tested on Xiaomi AX3000T flashed with OpenWRT.

Signed-off-by: Bohdan Chubuk <chbgdn@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/16915
(cherry picked from commit 1269a836ed)
Link: https://github.com/openwrt/openwrt/pull/17188
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 2024-12-06 15:12:46 +01:00
Bohdan Chubuk
f483de4767 generic: mtd: spinand: add support for FORESEE F35SQA002G 
Add support for FORESEE F35SQA002G SPI NAND.
Datasheet:
  https://www.longsys.com/uploads/LM-00006FORESEEF35SQA002GDatasheet_1650183701.pdf

Refresh all affected patch with make target/linux/refresh.

Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Bohdan Chubuk <chbgdn@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16915
(cherry picked from commit 5348e2e81a)
Link: https://github.com/openwrt/openwrt/pull/17188
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 2024-12-06 15:12:42 +01:00
John Audia
9e73f794ad kernel: enable pressure interface 
PSI provides a canonical way to see resource pressure increases as
they develop, with pressure metrics for three major resources:
memory, CPU, and IO. PSI stats are like barometers that provide
fair warning of impending resource shortages, enabling users to
take more proactive, granular, and nuanced steps when resources
start becoming scarce.

References:
* https://www.kernel.org/doc/html/latest/accounting/psi.html
* https://lwn.net/Articles/759781/

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/13819
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit eed39d45c2)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 2024-11-28 18:49:35 +00:00
Robert Marko
69eecbef91 generic: add CONFIG_FB_INTEL 
CONFIG_FB_INTEL is now visible on x86 since i915 driver is packaged as kmod
now and it stops compilation, so add it to the generic config.

Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 57daea682e)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 2024-11-28 18:47:58 +00:00
Rosen Penev
7142e35777 kernel: filter out compiler opts from config 
These get dynamically set based on compiler version. Not relevant for
targets.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16770
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit cd92cbddf8)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 2024-11-28 18:47:54 +00:00
Mieczyslaw Nalewaj
2884aded40 kernel: move CONFIG_INTEL_MEI settings to target generic 
Move settings CONFIG_INTEL_MEI_GSC_PROXY, CONFIG_INTEL_MEI_HDCP
and CONFIG_INTEL_MEI_PXP to target generic.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16971
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 84665993d6)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 2024-11-28 18:47:50 +00:00
Rosen Penev
2af51fbdab treewide: remove THIS_MODULE assignment 
Matches upstream coccinelle check: api/platform_no_drv_owner.cocci.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16846
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit cc98cfafd7)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 2024-11-28 18:46:45 +00:00
John Audia
b506c964a2 kernel: bump 6.6 to 6.6.61 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.61

Manually rebased:
	bcm27xx/patches-6.6/950-0998-i2c-designware-Add-support-for-bus-clear-feature.patch

All other patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16959
(cherry picked from commit 487ca61f91)
Link: https://github.com/openwrt/openwrt/pull/17055
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-11-24 22:46:21 +01:00
David Bauer
112adbee68 net: phy: broadcom: update dependency condition 
The broadcom PHY driver only has to depend upon PTP_1588_CLOCK_OPTIONAL
if NETWORK_PHY_TIMESTAMPING is enabled. The PTP functionality is stubbed
in this case.

Reflect this circumstance in the dependence condition. This allows to
build the driver as a built-in module even if PTP is built as a module.

This is required to include the broadcom PHY module regardless of the
built-setting of the PTP subsystem. On ath79 (and probably more)
targets with Broadcom PHY, Gigabit operation is currently broken as the
PHY driver is only built as a module in case all kernel-packages are
built. Due to this circumstance, affected devices fall back to using the
generic PHY driver.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit cbce32e30c29dc69907c6f4c0ab79dd5d9a8fb28)
 2024-11-18 23:02:09 +01:00
John Audia
92eb867873 kernel: bump 6.6 to 6.6.60 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.60

Removed upstreamed:
	generic/backport-6.6/409-mtd-spi-nor-winbond-fix-w25q128-regression.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.60&id=27a58a19bd20a7afe369da2ce6d4ebea70768acd

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16892
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 85844cfc5c)
 2024-11-10 17:09:14 +01:00
Mieczyslaw Nalewaj
7a1815f64d kernel: bump 6.6 to 6.6.59 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.59

Removed upstreamed:
 - generic/backport-6.6/777-netfilter-xtables-fix-typo-causing-some-targets-to-not-load-on-IPv6.patch[1]
 - generic/backport-6.6/780-24-v6.12-r8169-avoid-unsolicited-interrupts.patch[2]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.59&id=433742ba96baf30c21e654ce3e698ad87100593b
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.59&id=7d6d46b429804b1a182106e27e2f8c0e84689e1a

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16835
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 4fc47c6000)
 2024-11-09 17:35:58 +01:00
Linus Walleij
d92306d020 mtd: Add backported Winbond fix 
Upstream stable is slow at picking this up and several systems
are regressing. Add the patch locally in OpenWrt.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2024-11-04 10:49:49 +01:00
John Thomson
36834ea340 kernel: mtdsplit_minor: accept bootimage filename 
RouterBOOT v7 on NOR devices no longer accepts the YAFFS kernel ELF
method of booting. It will accept an NPK image named bootimage.
Adjust mtdsplit_minor to accept this second possible boot file name.
Use the conservative value of 127 for YAFFS max name length (used when
YAFFS compiled with unicode support) vs 255.

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Acked-by: Thibaut VARENE <hacks@slashdirt.org>
Link: https://github.com/openwrt/openwrt/pull/16780
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-10-30 11:15:34 +01:00
John Thomson
ade045084b kernel: mtdsplit_minor: return 0 if not fatal 
Introduced with Linux 6.7, in commit:
5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result"),
when a parser returns an error, this will be passed up, and
consequently, all parent mtd partitions get torn down.

Adjust the MiNOR mtdsplit driver to only return an error if there is a
critical problem in reading from the mtd device or allocating memory.
Otherwise return 0 to indicate that no partitions were found.
Also add logging to indicate what went wrong.

This mtdsplit parser makes a very limited check of the first YAFFS
header. For example, this will not match expectations when initially booting
an initramfs image with OEM on MTD.

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Acked-by: Thibaut VARENE <hacks@slashdirt.org>
Link: https://github.com/openwrt/openwrt/pull/16780
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-10-30 11:15:34 +01:00
Álvaro Fernández Rojas
57572de43a generic: backport upstream r8169 irq patch 
This commit backports an additional patch from linux v6.12 release.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2024-10-29 12:00:53 +01:00
Marius Dinu
63ea5710d9 kernel: add missing CONFIG_DM_AUDIT 
The option shows up when kmod-dm and CONFIG_KERNEL_AUDIT are selected.

Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
Link: https://github.com/openwrt/openwrt/pull/16793
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-10-27 12:45:16 +01:00
Daniel Golle
b6c2422448 generic: mtk_wed: fix path of MT7988 WO firmware 
commit eee3c695f3 ("linux-firmware: add offloading firmware for MT7988")
added mt7988_wo_{0,1}.bin in the 'mediatek/mt7988' directory while driver
currently expects the files in the 'mediatek' directory.

Import pending patch which changes the path in the driver header now
that the firmware has been added.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-26 15:21:03 +01:00
John Audia
8e294af41b kernel: bump 6.6 to 6.6.58 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.58

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16758
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-10-24 00:23:24 +02:00
Hauke Mehrtens
1306885968 kernel: Reorder config files 
Reorder the kernel configuration files.

This was done uisng:
./scripts/kconfig-reorder.sh

Link: https://github.com/openwrt/openwrt/pull/16743
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-10-22 21:13:26 +02:00
Rosen Penev
8f1332d275 kernel: move CONFIG_DRM_OFDRM to generic 
Multiple platforms are affected by this, including mpc85xx's p1020.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16746
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-10-22 00:50:55 +02:00
Rosen Penev
9bc0517b78 kernel: gpio-cascade: use gpiochip_get_data 
Instead of passing NULL to gpiochip_add_data, we can populate the
parameter and use gpiochip_get_data instead of a custom function.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16739
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-10-22 00:49:18 +02:00
Christian Marangi
c5f38c1fd0 generic: backport alloc_netdev_dummy patch from upstream 
Backport alloc_netdev_dummy patch from upstream needed for new Airoha
EN7581 SoC.

Refresh all affected patch with make target/linux/refresh.

Link: https://github.com/openwrt/openwrt/pull/16730
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 2024-10-20 23:24:08 +02:00
Felix Fietkau
2a1daeaabd kernel: fix forwarding broadcast packets between vlan-on-dsa and non-dsa netdevs 
Fix conditions for handling offloaded packets

Fixes: #13430
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2024-10-20 18:46:33 +02:00
John Audia
51bbc8114b kernel: bump 6.6 to 6.6.57 
1. Update target/linux/generic/config-6.6 for new ksym
2. Refresh patches

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.57

Added:
	generic/backport-6.6/777-netfilter-xtables-fix-typo-causing-some-targets-to-not-load-on-IPv6.patch[1]

Manually rebased:
	generic/hack-6.6/645-netfilter-connmark-introduce-set-dscpmark.patch

Removed upstreamed:
	gemini/patches-6.6/0001-net-ethernet-cortina-Drop-TSO-support.patch[2]
	gemini/patches-6.6/0004-net-ethernet-cortina-Restore-TSO-support.patch[3]

All other patches automatically rebased.

1. https://lore.kernel.org/all/20241019-xtables-typos-v2-1-6b8b1735dc8e@0upti.me/
2 https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.57&id=452c0740d72c6a77a41f6ddc318a48f18c3d2346
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.57&id=611f74b0e7fb93ee2366d9d7edca546806b220e9

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16726
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 2024-10-19 16:21:32 +02:00
Daniel Golle
abda39d86d generic: import and move accepted RealTek PHY patches 
Import commits from upstream Linux and move/rename existing patches
which have been acceped.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-17 13:33:18 +01:00
Daniel Golle
4d81f40d63 generic: fix kernel version and ordering of Aquantia backports 
Two patches declared as accepted in v6.13 were already accepted for
v6.12. Fix filenames and order of patches applied.

Reported-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Fixes: 8cc049cec2 ("generic: phy: aquantia: move accepted patches to backport-6.6")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-15 21:20:19 +01:00
Daniel Golle
3f3c27e22c generic: net: phy: intel-way: add support for PHY LEDs 
Add driver support for PHY LEDs for MaxLinear/Intel/Lantiq XWAY
Ethernet PHYs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-15 17:54:30 +01:00
Daniel Golle
5fd518b6e3 generic: net: phy: mxl-gpy: add support for PHY LEDs 
Add driver support for PHY LEDs for MaxLinear/Intel GPY Ethernet PHYs.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-15 17:47:31 +01:00
Daniel Golle
45bad8ba98 generic: phy: aquantia: correctly describe LED polarity 
Backport newly introduced support for 'active-high' property and use
it to correctly implement polarity assignment for Aquantia PHY LEDs.
Previously the 'active-low' property was used to switch a LED PIN to
active-high ("drive VDD" in Aquantia-speak) mode.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-15 17:46:14 +01:00
Daniel Golle
8cc049cec2 generic: phy: aquantia: move accepted patches to backport-6.6 
Move patches accepted upstream from pending-6.6 to backport-6.6.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-15 17:45:18 +01:00
Daniel Golle
ee03a2742b generic: net: phy: be more conservative about MAC interface selection 
Only add SerDes interface modes at lower speeds to host_interfaces.

Fixes: 5281033831 ("generic: net: phy: use all SerDes MAC interface modes")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-15 14:21:37 +01:00
Felix Fietkau
506d0c421b kernel: fix mtk_eth_soc memory corruption issue on fq dma init 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2024-10-15 10:22:02 +02:00
Linus Walleij
14f79ad139 linux: generic: dsa: mv88e6xx: Drop obsolete patch 
As described by Tobias Waldekranz this patch is obsolete
and the issue is already fixed in the upstream kernels we
are using.

Link: http://lists.openwrt.org/pipermail/openwrt-devel/2024-October/043238.html
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2024-10-12 22:07:46 +02:00
Linus Walleij
c990f6e156 linux: generic: net: dsa: mv88e6xxx LED support 
This solution that is needed for some routers to provide proper
LED activity when controlled directly by the MV88E6xxx switch,
has just been merged in upstream Linux.

Make this patch 901 as other backports from earlier kernels
are in patch 896 and this is the first free number after
that.

Patch offsets in pending patches are augmented as part of
the refresh.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2024-10-12 22:07:35 +02:00
John Audia
12f12df569 kernel: bump 6.6 to 6.6.55 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.55

Added the following default ksym to target/linux/generic/config-6.6:
	CONFIG_PROC_MEM_ALWAYS_FORCE=y
	# CONFIG_PROC_MEM_FORCE_PTRACE is not set
	# CONFIG_PROC_MEM_NO_FORCE is not set

Removed upstreamed:
	generic/backport-6.6/780-23-v6.12-r8169-Fix-spelling-mistake-tx_underun-tx_underrun.patch[1]
	generic/backport-6.6/780-25-v6.12-r8169-add-tally-counter-fields-added-with-RTL8125.patch[2]
	generic/pending-6.6/684-gso-fix-gso-fraglist-segmentation-after-pull-from-fr.patch[3]
	lantiq/patches-6.6/0025-v6.12-net-ethernet-lantiq_etop-fix-memory-disclosure.patch[4]

Manually rebased:
	bcm27xx/patches-6.6/950-0086-Main-bcm2708-bcm2709-linux-port.patch
	bcm27xx/patches-6.6/950-0998-i2c-designware-Add-support-for-bus-clear-feature.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=f02fcb7283b1c25f7e3ae07d7a2c830e06eb1a62
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=1c723d785adb711496bc64c24240f952f4faaabf
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=af3122f5fdc0d00581d6e598a668df6bf54c9daa
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.56&id=e66e38d07b31e177ca430758ed97fbc79f27d966

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16655
Signed-off-by: Nick Hainke <vincent@systemli.org>
 2024-10-11 19:21:41 +02:00
Christian Marangi
f9a70a20c5 generic: backport BLOCK OF support patch 
Backport BLOCK OF support patch merged upstream and refresh pending
BLOCK patches.

This is a new way to declare partition table for BLOCK device (eMMC
currently supported) with the use of DTS.

Current pending patch are adapted to not cause regression with current
downstream implementation of a similar functionality.

Also enable the new OF_PARTITION config by default.

Link: https://github.com/openwrt/openwrt/pull/16663
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
 2024-10-11 17:18:40 +02:00
Felix Fietkau
fa6bd065dd kernel: backport upstream commit that allows leaving out .ndo_get_stats64 
Fixes mac80211 backport device statistics.

Fixes: #16642
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2024-10-09 10:44:44 +02:00
Daniel Golle
5281033831 generic: net: phy: use all SerDes MAC interface modes 
Instead of forcing 2.5G PHYs into rate-adapter mode which results higher
energy consumption, lack of support for half-duplex modes and typically
worse performance when linked at speeds less than 2.5G, use SGMII mode
which allows the MAC to follow the PHY speed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-09 02:38:25 +01:00
Daniel Golle
69906789e0 generic: net: phy: realtek: various improvements 
Follow the advise of Russell King allows to greatly improve the driver
for RealTek's 1G and 2.5G Ethernet PHYs. The results are full/half
duplex as well as Gbit master/slave property being read from PHY
Specific Status Register (PHYSR), and fixes regarding link-partner
advertisement.

Fixes: #14504
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2024-10-09 02:36:22 +01:00
John Thomson
7d33aedd10 generic: platform/mikrotik: add wlan lz77 decompress 
A number of new (or with recently updated caldata)
Mikrotik devices are using LZ77 magic for wlan tag hard_config data.
New devices include the Chateau LTE12 [1], and ax devices [2]
Newly factory flashed devices may include the hap ac3 [3]

This can be seen in decoded OEM supout [4] dmesg:
"radio data lz77 decompressed from"…

Investigating an arm RouterOS flash.ko module, and supplied example
hard_config dumps, the format was guessed via decompilation and live
debugging [5]. This decoder was then built from the guessed format
specification.

debug prints can be enabled in a DYNAMIC_DEBUG kernel build via the
kernel cmdline:

        chosen {
-               bootargs = "console=ttyS0,115200";
+               bootargs = "console=ttyS0,115200 dyndbg=\"file drivers/platform/mikrotik/* +p\"";
        };

[1]: https://forum.openwrt.org/t/no-wireless-mikrotik-rbd53ig-5hacd2hnd/157763/4
[2]: https://forum.openwrt.org/t/mikrotik-routeros-v7-x-and-openwrt-sysupgrade/148072/17
[3]: https://forum.openwrt.org/t/adding-support-for-mikrotik-hap-ax2/133715/47
[4]: https://github.com/farseeker/go-mikrotik-rif
[5]: https://github.com/john-tho/routeros-wlan-lz77-decode

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Link: https://github.com/openwrt/openwrt/pull/15774
Signed-off-by: Robert Marko <robimarko@gmail.com>
 2024-10-08 10:45:58 +02:00