--- a/nl80211.h +++ b/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2019 Intel Corporation + * Copyright (C) 2018-2020 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -249,6 +249,45 @@ */ /** + * DOC: VLAN offload support for setting group keys and binding STAs to VLANs + * + * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they + * support offloading VLAN functionality in a manner where the driver exposes a + * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs + * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet + * case. Frames received from stations that are not assigned to any VLAN are + * delivered on the main netdev and frames to such stations can be sent through + * that main netdev. + * + * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and + * %NL80211_CMD_SET_STATION will optionally specify vlan_id using + * %NL80211_ATTR_VLAN_ID. + */ + +/** + * DOC: TID configuration + * + * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG + * attribute given in wiphy capabilities. + * + * The necessary configuration parameters are mentioned in + * &enum nl80211_tid_config_attr and it will be passed to the + * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. + * + * If the configuration needs to be applied for specific peer then the MAC + * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the + * configuration will be applied for all the connected peers in the vif except + * any peers that have peer specific configuration for the TID by default; if + * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values + * will be overwritten. + * + * All this configuration is valid only for STA's current connection + * i.e. the configuration will be reset to default when the STA connects back + * after disconnection/roaming, and this configuration will be cleared when + * the interface goes down. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -257,13 +296,14 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the - * attributes determining the channel width; this is used for setting - * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, - * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. - * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL - * instead, the support here is for backward compatibility only. + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the + * channel width; this is used for setting monitor mode channel), + * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, + * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or + * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, + * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward + * compatibility only. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -312,7 +352,8 @@ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * The channel to use can be set on the interface or be given using the - * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the + * attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -497,11 +538,12 @@ * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify * the SSID (mainly for association, but is included in authentication - * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used - * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE - * is used to specify the authentication type. %NL80211_ATTR_IE is used to - * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) - * to be added to the frame. + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + + * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the + * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the + * authentication type. %NL80211_ATTR_IE is used to define IEs + * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added + * to the frame. * When used as an event, this reports reception of an Authentication * frame in station and IBSS modes when the local MLME processed the * frame, i.e., it was for the local STA and was received in correct @@ -556,8 +598,9 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, - * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, + * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and @@ -571,6 +614,14 @@ * set of BSSID,frequency parameters is used (i.e., either the enforcing * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). + * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if + * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is + * included, these IEs through %NL80211_ATTR_IE are specified by the user + * space based on the best possible BSS selected. Thus, if the driver ends + * up selecting a different BSS, it can modify these IEs accordingly (e.g. + * userspace asks the driver to perform PMKSA caching with BSS1 and the + * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE + * has to get updated with the apt PMKID). * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within * the ESS in case the device is already associated and an association with * a different BSS is desired. @@ -640,6 +691,10 @@ * four bytes for vendor frames including the OUI. The registration * cannot be dropped, but is removed automatically when the netlink * socket is closed. Multiple registrations can be made. + * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if + * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which + * case the registration can also be modified to include/exclude the + * flag, rather than requiring unregistration to change it. * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for * backward compatibility * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This @@ -739,7 +794,7 @@ * various triggers. These triggers can be configured through this * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For * more background information, see - * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification * from the driver reporting the wakeup reason. In this case, the * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason @@ -1101,6 +1156,20 @@ * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame * content. The frame is ethernet data. * + * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration + * is passed using %NL80211_ATTR_TID_CONFIG attribute. + * + * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon + * frame. This event is used to indicate that a received Beacon frame was + * dropped because it did not include a valid MME MIC while beacon + * protection was enabled (BIGTK configured in station mode). + * + * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control + * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. + * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME + * includes the contents of the frame. %NL80211_ATTR_ACK flag is included + * if the recipient acknowledged the frame. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1325,6 +1394,12 @@ enum nl80211_commands { NL80211_CMD_PROBE_MESH_LINK, + NL80211_CMD_SET_TID_CONFIG, + + NL80211_CMD_UNPROT_BEACON, + + NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1370,7 +1445,8 @@ enum nl80211_commands { * of &enum nl80211_chan_width, describing the channel width. See the * documentation of the enum for more information. * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the - * channel, used for anything but 20 MHz bandwidth + * channel, used for anything but 20 MHz bandwidth. In S1G this is the + * operating channel center frequency. * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the * channel, used only for 80+80 MHz bandwidth * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ @@ -1580,7 +1656,8 @@ enum nl80211_commands { * flag is included, then control port frames are sent over NL80211 instead * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER - * flag. + * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth + * frames are not forwared over the control port. * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. @@ -2373,6 +2450,64 @@ enum nl80211_commands { * the allowed channel bandwidth configurations. (u8 attribute) * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. * + * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key + * (u16). + * + * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. + * + * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry + * using attributes from &enum nl80211_iftype_akm_attributes. This + * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating + * supported AKM suites capability per interface. AKMs advertised in + * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not + * advertised for a specific interface type. + * + * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a + * nested attribute with &enum nl80211_tid_config_attr sub-attributes; + * on output (in wiphy attributes) it contains only the feature sub- + * attributes. + * + * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control + * port in order to forward/receive them as ordinary data frames. + * + * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, + * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). + * An optional parameter configured through %NL80211_CMD_SET_PMKSA. + * Drivers that trigger roaming need to know the lifetime of the + * configured PMKSA for triggering the full vs. PMKSA caching based + * authentication. This timeout helps authentication methods like SAE, + * where PMK gets updated only by going through a full (new SAE) + * authentication instead of getting updated during an association for EAP + * authentication. No new full authentication within the PMK expiry shall + * result in a disassociation at the end of the lifetime. + * + * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in + * terms of percentage of %NL80211_ATTR_PMK_LIFETIME + * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional + * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the + * driver to trigger a full authentication roam (without PMKSA caching) + * after the reauthentication threshold time, but before the PMK lifetime + * has expired. + * + * Authentication methods like SAE need to be able to generate a new PMKSA + * entry without having to force a disconnection after the PMK timeout. If + * no roaming occurs between the reauth threshold and PMK expiration, + * disassociation is still forced. + * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the + * %NL80211_CMD_REGISTER_FRAME command, see the description there. + * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated + * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with + * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. + * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the + * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. + * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies + * + * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from + * association request when used with NL80211_CMD_NEW_STATION). + * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2835,6 +2970,28 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_EDMG_CHANNELS, NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, + NL80211_ATTR_VLAN_ID, + + NL80211_ATTR_HE_BSS_COLOR, + + NL80211_ATTR_IFTYPE_AKM_SUITES, + + NL80211_ATTR_TID_CONFIG, + + NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, + + NL80211_ATTR_PMK_LIFETIME, + NL80211_ATTR_PMK_REAUTH_THRESHOLD, + + NL80211_ATTR_RECEIVE_MULTICAST, + NL80211_ATTR_WIPHY_FREQ_OFFSET, + NL80211_ATTR_CENTER_FREQ1_OFFSET, + NL80211_ATTR_SCAN_FREQ_KHZ, + + NL80211_ATTR_HE_6GHZ_CAPABILITY, + + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3413,6 +3570,8 @@ enum nl80211_mpath_info { * defined in HE capabilities IE * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently * defined + * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), + * given for all 6 GHz band channels * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use */ enum nl80211_band_iftype_attr { @@ -3423,6 +3582,7 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, + NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -3554,6 +3714,9 @@ enum nl80211_wmm_rule { * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. * This is a nested attribute that contains the wmm limitation per AC. * (see &enum nl80211_wmm_rule) + * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel + * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3583,6 +3746,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, NL80211_FREQUENCY_ATTR_WMM, + NL80211_FREQUENCY_ATTR_NO_HE, + NL80211_FREQUENCY_ATTR_OFFSET, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3780,6 +3945,7 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed + * @NL80211_RRF_NO_HE: HE operation not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -3797,6 +3963,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_HT40PLUS = 1<<14, NL80211_RRF_NO_80MHZ = 1<<15, NL80211_RRF_NO_160MHZ = 1<<16, + NL80211_RRF_NO_HE = 1<<17, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4351,6 +4518,7 @@ enum nl80211_bss_scan_width { * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. * Contains a nested array of signal strength attributes (u8, dBm), * using the nesting index as the antenna number. + * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4375,6 +4543,7 @@ enum nl80211_bss { NL80211_BSS_PARENT_TSF, NL80211_BSS_PARENT_BSSID, NL80211_BSS_CHAIN_SIGNAL, + NL80211_BSS_FREQUENCY_OFFSET, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4503,6 +4672,7 @@ enum nl80211_key_default_types { * See &enum nl80211_key_default_types. * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. * Defaults to @NL80211_KEY_RX_TX. + * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute @@ -4518,6 +4688,7 @@ enum nl80211_key_attributes { NL80211_KEY_TYPE, NL80211_KEY_DEFAULT_TYPES, NL80211_KEY_MODE, + NL80211_KEY_DEFAULT_BEACON, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -4674,6 +4845,92 @@ enum nl80211_tx_power_setting { }; /** + * enum nl80211_tid_config - TID config state + * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID + * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID + */ +enum nl80211_tid_config { + NL80211_TID_CONFIG_ENABLE, + NL80211_TID_CONFIG_DISABLE, +}; + +/* enum nl80211_tx_rate_setting - TX rate configuration type + * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate + * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter + * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter + */ +enum nl80211_tx_rate_setting { + NL80211_TX_RATE_AUTOMATIC, + NL80211_TX_RATE_LIMITED, + NL80211_TX_RATE_FIXED, +}; + +/* enum nl80211_tid_config_attr - TID specific configuration. + * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values + * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported + * for per-vif configuration; doesn't list the ones that are generic + * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). + * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but + * per peer instead. + * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates + * that the new configuration overrides all previous peer + * configurations, otherwise previous peer specific configurations + * should be left untouched. + * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) + * Its type is u16. + * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. + * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. + * Its type is u8. + * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame + * transmission, user-space sets this configuration in + * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. + * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame + * transmission, user-space sets this configuration in + * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. + * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. + * Its type is u8, using the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs + * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using + * the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. + * Its type is u8, using the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful + * to notfiy the driver that what type of txrate should be used + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using + * the values form &nl80211_tx_rate_setting. + * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied + * with the parameters passed through %NL80211_ATTR_TX_RATES. + * configuration is applied to the data frame for the tid to that connected + * station. + */ +enum nl80211_tid_config_attr { + __NL80211_TID_CONFIG_ATTR_INVALID, + NL80211_TID_CONFIG_ATTR_PAD, + NL80211_TID_CONFIG_ATTR_VIF_SUPP, + NL80211_TID_CONFIG_ATTR_PEER_SUPP, + NL80211_TID_CONFIG_ATTR_OVERRIDE, + NL80211_TID_CONFIG_ATTR_TIDS, + NL80211_TID_CONFIG_ATTR_NOACK, + NL80211_TID_CONFIG_ATTR_RETRY_SHORT, + NL80211_TID_CONFIG_ATTR_RETRY_LONG, + NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, + NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, + NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, + NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, + NL80211_TID_CONFIG_ATTR_TX_RATE, + + /* keep last */ + __NL80211_TID_CONFIG_ATTR_AFTER_LAST, + NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 +}; + +/** * enum nl80211_packet_pattern_attr - packet pattern attribute * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has @@ -5144,6 +5401,8 @@ enum plink_actions { #define NL80211_KCK_LEN 16 #define NL80211_KEK_LEN 16 +#define NL80211_KCK_EXT_LEN 24 +#define NL80211_KEK_EXT_LEN 32 #define NL80211_REPLAY_CTR_LEN 8 /** @@ -5152,6 +5411,7 @@ enum plink_actions { * @NL80211_REKEY_DATA_KEK: key encryption key (binary) * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) + * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) */ @@ -5160,6 +5420,7 @@ enum nl80211_rekey_data { NL80211_REKEY_DATA_KEK, NL80211_REKEY_DATA_KCK, NL80211_REKEY_DATA_REPLAY_CTR, + NL80211_REKEY_DATA_AKM, /* keep last */ NUM_NL80211_REKEY_DATA, @@ -5484,6 +5745,39 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in * station mode (SAE password is passed as part of the connect command). * + * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev + * with VLAN tagged frames and separate VLAN-specific netdevs added using + * vconfig similarly to the Ethernet case. + * + * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) + * feature, which prevents bufferbloat by using the expected transmission + * time to limit the amount of data buffered in the hardware. + * + * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection + * and can receive key configuration for BIGTK using key indexes 6 and 7. + * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon + * protection as a client only and cannot transmit protected beacons. + * + * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the + * forwarding of preauth frames over the control port. They are then + * handled as ordinary data frames. + * + * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames + * + * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations + * in IBSS mode, essentially by dropping their state. + * + * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations + * are possible for multicast frames and those will be reported properly. + * + * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and + * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to + * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be + * included in the scan request. + * + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver + * can report tx status for control port over nl80211 tx operations. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5529,6 +5823,16 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_EXT_KEY_ID, NL80211_EXT_FEATURE_STA_TX_PWR, NL80211_EXT_FEATURE_SAE_OFFLOAD, + NL80211_EXT_FEATURE_VLAN_OFFLOAD, + NL80211_EXT_FEATURE_AQL, + NL80211_EXT_FEATURE_BEACON_PROTECTION, + NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, + NL80211_EXT_FEATURE_PROTECTED_TWT, + NL80211_EXT_FEATURE_DEL_IBSS_STA, + NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, + NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, + NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -5640,6 +5944,9 @@ enum nl80211_timeout_reason { * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to * only have supported rates and no additional capabilities (unless * added by userspace explicitly.) + * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with + * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means + * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -5655,6 +5962,7 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, + NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, }; /** @@ -6151,12 +6459,14 @@ enum nl80211_ftm_responder_stats { * @NL80211_PREAMBLE_HT: HT preamble * @NL80211_PREAMBLE_VHT: VHT preamble * @NL80211_PREAMBLE_DMG: DMG preamble + * @NL80211_PREAMBLE_HE: HE preamble */ enum nl80211_preamble { NL80211_PREAMBLE_LEGACY, NL80211_PREAMBLE_HT, NL80211_PREAMBLE_VHT, NL80211_PREAMBLE_DMG, + NL80211_PREAMBLE_HE, }; /** @@ -6349,6 +6659,10 @@ enum nl80211_peer_measurement_attrs { * is valid) * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating * the maximum FTMs per burst (if not present anything is valid) + * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if + * trigger based ranging measurement is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating + * if non trigger based ranging measurement is supported * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -6364,6 +6678,8 @@ enum nl80211_peer_measurement_ftm_capa { NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, + NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, + NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, /* keep last */ NUM_NL80211_PMSR_FTM_CAPA_ATTR, @@ -6393,6 +6709,20 @@ enum nl80211_peer_measurement_ftm_capa { * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data * (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging + * measurement (flag). + * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are + * mutually exclusive. + * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based + * ranging will be used. + * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based + * ranging measurement (flag) + * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are + * mutually exclusive. + * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based + * ranging will be used. * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -6409,6 +6739,8 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, + NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, + NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, @@ -6548,5 +6880,51 @@ enum nl80211_obss_pd_attributes { NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, }; +/** + * enum nl80211_bss_color_attributes - BSS Color attributes + * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid + * + * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. + * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. + * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. + * + * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal + * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. + */ +enum nl80211_bss_color_attributes { + __NL80211_HE_BSS_COLOR_ATTR_INVALID, + + NL80211_HE_BSS_COLOR_ATTR_COLOR, + NL80211_HE_BSS_COLOR_ATTR_DISABLED, + NL80211_HE_BSS_COLOR_ATTR_PARTIAL, + + /* keep last */ + __NL80211_HE_BSS_COLOR_ATTR_LAST, + NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_iftype_akm_attributes - interface type AKM attributes + * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid + * + * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag + * attribute for each interface type that supports AKM suites specified in + * %NL80211_IFTYPE_AKM_ATTR_SUITES + * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported + * AKM suites for the specified interface types. + * + * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal + * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. + */ +enum nl80211_iftype_akm_attributes { + __NL80211_IFTYPE_AKM_ATTR_INVALID, + + NL80211_IFTYPE_AKM_ATTR_IFTYPES, + NL80211_IFTYPE_AKM_ATTR_SUITES, + + /* keep last */ + __NL80211_IFTYPE_AKM_ATTR_LAST, + NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, +}; #endif /* __LINUX_NL80211_H */