INAGAKI Hiroshi
3198ec5b9d
ipq806x: fix and cleanup dts for NEC WG2600HP
This commit fixes and cleanups qcom-ipq8064-wg2600hp.dts to improve the
support for WG2600HP.
- Use dt label in qcom-ipq8064.dtsi:
- gmac1
- gmac2
- gsbi4
- gsbi4_serial
- gsbi5
- hs_phy_0
- ss_phy_0
- usb3_0
- usb3_1
- pcie0
- pcie1
- qcom_pinmux
- Fix wrong pcie reset (perst) gpios
- drop reset-gpio and use perst-gpios in qcom-ipq8064.dtsi
- Remove unnecessary dt label from device dts
- flash
- phy0, phy4
- Rename spi-nor node to "flash" from "m25p80"
- Fix qca,ar8327-initvals
- use oem settings
- fix: PAD0_MODE, PAD6_MODE
- drop: PAD5_MODE (unnecessary)
- Move mtd partitions under partitions (fixed-partitions) node
- Specify "firmware" partition format
- WG2600HP uses uImage format (denx,uimage)
- Change failsafe status LED to power_red
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-12-12 18:59:01 +01:00
..
2018-12-10 11:48:44 +01:00
2018-12-07 21:46:45 +01:00
2018-12-10 11:48:44 +01:00
2018-12-12 12:28:26 +01:00
2018-12-10 11:48:44 +01:00
2018-12-11 13:36:52 +01:00
2018-12-11 11:34:45 +01:00
2018-12-10 16:32:22 +01:00
2018-11-25 19:23:03 +01:00
2018-12-06 08:42:40 +01:00
2018-12-12 18:59:01 +01:00
2018-12-06 08:42:40 +01:00
2018-12-11 11:34:45 +01:00
2018-12-10 11:48:44 +01:00
2018-11-28 23:37:29 +01:00
2018-12-06 08:42:22 +01:00
2018-12-12 11:01:59 +01:00
2018-12-10 11:48:44 +01:00
2018-12-03 07:38:20 +01:00