Files
openwrt-R7800-nss/target/linux
INAGAKI Hiroshi 5c11258297 ramips: add support for I-O DATA WN-AC733GR3
I-O DATA WN-AC733GR3 is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7620A.

Specification

- SoC		: MediaTek MT7620A
- RAM		: DDR2 64 MiB
- Flash		: SPI-NOR 8 MiB
- WLAN		: 2.4/5 GHz
  - 2.4 GHz : MT7620A (SoC), 2T2R
  - 5 GHz   : MT7610E, 1T1R
- Ethernet	: 10/100/1000 Mbps (RTL8367RB)
- LED/key	: 4x/4x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J1: Vcc, RX, GND, TX from LED side
  - 57600n8

Flash instruction using factory image:

1. Boot WN-AC733GR3 normaly
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt factory image and click update ("更新") button
to perform firmware update
4. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2019-03-21 00:57:20 +01:00
..
2019-01-28 18:17:32 +01:00
2019-01-28 18:17:32 +01:00
2019-01-28 18:17:32 +01:00
2019-03-18 10:02:51 +01:00
2019-01-27 00:16:13 +01:00
2018-11-05 16:00:00 +01:00
2019-02-14 16:45:01 +01:00
2019-02-25 17:33:16 +01:00
2019-02-22 10:53:42 +01:00
2019-03-18 10:02:51 +01:00
2019-01-13 16:31:40 +01:00
2018-08-20 13:03:23 +02:00
2019-02-14 16:45:01 +01:00
2019-03-18 10:02:51 +01:00
2019-03-11 19:35:43 +01:00
2019-01-12 19:40:13 +01:00
2018-10-09 14:29:55 +02:00
2018-10-19 10:01:57 +02:00
2019-03-18 10:02:51 +01:00
2019-01-07 17:09:06 +01:00
2018-12-10 11:48:44 +01:00
2018-08-20 13:03:23 +02:00
2018-12-26 17:32:48 +01:00
2010-08-06 21:36:35 +00:00