JinGen Lim
b38d446ecd
ipq806x: add support for Fortinet FAP-421E
Hardware
--------
SoC: Qualcomm IPQ8064
RAM: 235MB
Flash: 128MB NAND (Micron MT29F1G08ABBDAH4)
32MB SPI-NOR (Spansion FL256SAIFRO)
WLAN2: Qualcomm Atheros QCA9980
WLAN5: Qualcomm Atheros QCA9980
ETH: LAN1 - Atheros AR8035
LAN2 - Atheros AR8033
USB: USB-A, 2.0
LED: Power (yellow/amber)
LAN1 (yellow/amber)
LAN2 (yellow/amber)
WLAN2G (yellow)
WLAN5G (yellow)
BTN: Reset
Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage
MAC Address: LAN1 (label) at APPSBL partition
LAN2: label + 1
WLAN2: label + 8
WLAN5: label + 16
Installation
------------
Connect to the RJ45 console (TTL)
Connect LAN1 to host, set host ip as 192.168.1.10
Start a tftp server to serve the initramfs image
Open console connection (9600n8)
Connect power through the DC jack
`Hit any key to stop autoboot: 5`: press any key
`Enter G,Q,or H:`: press `K` to access the hidden option
`Enter password:`: `fap22b1!$` to access a limited u-boot console
`(FAP) #`: `tftpboot your_initramfs_image_name.itb`
`(FAP) #`: `bootm`
Once OpenWrt has booted, install the firmware through sysupgrade
Signed-off-by: JinGen Lim <openwrt@sn.sg>
2024-01-15 16:57:50 +01:00
..
2023-12-21 11:26:35 +01:00
2024-01-11 01:40:50 +01:00
2024-01-06 12:52:49 +01:00
2024-01-06 10:53:39 +01:00
2023-12-18 08:33:04 +01:00
2024-01-06 12:52:49 +01:00
2024-01-08 08:30:09 +01:00
2023-12-12 19:35:03 +01:00
2024-01-05 16:12:49 +01:00
2024-01-15 16:57:50 +01:00
2023-12-09 14:45:50 +01:00
2023-12-15 17:59:35 +01:00
2023-12-19 14:18:55 +01:00
2023-12-11 17:39:57 +01:00
2024-01-14 23:11:57 +00:00
2023-12-28 23:37:51 +01:00
2023-12-18 22:17:09 +00:00
2023-12-19 14:12:25 +01:00
2024-01-01 02:34:48 +01:00
2024-01-15 16:52:08 +01:00
2024-01-10 20:56:06 +01:00
2024-01-13 16:45:05 +01:00
2024-01-04 22:07:01 +01:00
2023-12-19 16:02:05 +01:00
2023-12-23 07:52:05 +00:00