c2f52e42b1
Change the RGB indicator LED color for the running state from green to blue. There are various reasons for this change: - In stock firmware, green means internet connection is up, red means it is down, and blue means indeterminate. To track stock behavior as closely as possible, OpenWrt should indicate blue by default. - In the current 23.x OpenWrt releases for this router, the led glows blue all the time -not green- because the bootloader sets it blue and there is an OpenWrt bug that makes it unable to control the LED. The bug is fixed in master, so without this commit there would be an unexpected change of behavior for this device in the next release. - The ports other closely related Linksys devices (such as EA8300 and MR8300) get this right and use blue for the running state. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
516 lines
8.1 KiB
Plaintext
516 lines
8.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "Linksys WHW03 V2 (Velop)";
|
|
compatible = "linksys,whw03v2", "qcom,ipq4019";
|
|
|
|
aliases {
|
|
led-boot = &led_blue;
|
|
led-failsafe = &led_red;
|
|
led-running = &led_blue;
|
|
led-upgrade = &led_red;
|
|
};
|
|
|
|
// The arguments rootfstype and ro are needed
|
|
// to override the default bootargs
|
|
chosen {
|
|
bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
|
|
stdout-path = &blsp1_uart1;
|
|
};
|
|
|
|
soc {
|
|
ess-tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
};
|
|
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
&tlmm {
|
|
mdio_pins: mdio-pinmux {
|
|
mux-1 {
|
|
pins = "gpio6";
|
|
function = "mdio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux-2 {
|
|
pins = "gpio7";
|
|
function = "mdc";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
i2c_0_pins: i2c-0-pinmux {
|
|
mux {
|
|
function = "blsp_i2c0";
|
|
pins = "gpio20", "gpio21";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
serial_0_pins: serial0-pinmux {
|
|
mux {
|
|
pins = "gpio16", "gpio17";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
serial_1_pins: serial1-pinmux {
|
|
mux {
|
|
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
|
function = "blsp_uart1";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_0_pins: spi-0-pinmux {
|
|
mux {
|
|
function = "blsp_spi0";
|
|
pins = "gpio13", "gpio14", "gpio15";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
|
|
mux-cs {
|
|
pins = "gpio12";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
spi_1_pins: spi-1-pinmux {
|
|
mux-1 {
|
|
function = "blsp_spi1";
|
|
pins = "gpio44", "gpio46","gpio47";
|
|
bias-disable;
|
|
};
|
|
|
|
mux-2 {
|
|
pins = "gpio31", "gpio45", "gpio49";
|
|
function = "gpio";
|
|
bias-pull-up;
|
|
output-high;
|
|
};
|
|
|
|
host-interrupt {
|
|
pins = "gpio42";
|
|
function = "gpio";
|
|
input;
|
|
};
|
|
};
|
|
|
|
wifi_0_pins: wifi0-pinmux {
|
|
btcoexist {
|
|
bias-pull-up;
|
|
drive-strength = <6>;
|
|
function = "gpio";
|
|
output-high;
|
|
pins = "gpio52";
|
|
};
|
|
};
|
|
|
|
zigbee-0 {
|
|
gpio-hog;
|
|
gpios = <29 GPIO_ACTIVE_HIGH>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
|
|
zigbee-1 {
|
|
gpio-hog;
|
|
gpios = <50 GPIO_ACTIVE_HIGH>;
|
|
bias-disable;
|
|
input;
|
|
};
|
|
|
|
bluetooth-enable {
|
|
gpio-hog;
|
|
gpios = <32 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
phy-reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
ðphy0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ðphy1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ðphy2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
ðphy3 {
|
|
reg = <0x1b>;
|
|
};
|
|
|
|
ðphy4 {
|
|
reg = <0x1c>;
|
|
};
|
|
|
|
&psgmiiphy {
|
|
reg = <0x1d>;
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&prng {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
num-channels = <4>;
|
|
qcom,num-ees = <2>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
status = "okay";
|
|
pinctrl-0 = <&serial_0_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&blsp1_uart2 {
|
|
status = "okay";
|
|
pinctrl-0 = <&serial_1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
bluetooth {
|
|
compatible = "csr,8811";
|
|
|
|
enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&blsp1_spi2 {
|
|
pinctrl-0 = <&spi_1_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
|
|
|
|
zigbee@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
compatible = "silabs,em3581";
|
|
reg = <0>;
|
|
spi-max-frequency = <12000000>;
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c3 {
|
|
pinctrl-0 = <&i2c_0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
// RGB LEDs
|
|
pca9633: led-controller@62 {
|
|
compatible = "nxp,pca9633";
|
|
nxp,hw-blink;
|
|
reg = <0x62>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led_red: red@0 {
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
reg = <0>;
|
|
};
|
|
|
|
led_green: green@1 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
reg = <1>;
|
|
};
|
|
|
|
led_blue: blue@2 {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
reg = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb3_ss_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "SBL1";
|
|
reg = <0x0 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "MIBIB";
|
|
reg = <0x100000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "QSEE";
|
|
reg = <0x200000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "CDT";
|
|
reg = <0x300000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@380000 {
|
|
label = "APPSBL";
|
|
reg = <0x380000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@580000 {
|
|
label = "ART";
|
|
reg = <0x580000 0x80000>;
|
|
read-only;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_gmac0: macaddr@0 {
|
|
compatible = "mac-base";
|
|
reg = <0x0 0x6>;
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
|
|
macaddr_gmac1: macaddr@6 {
|
|
reg = <0x6 0x6>;
|
|
};
|
|
|
|
precal_art_1000: precal@1000 {
|
|
reg = <0x1000 0x2f20>;
|
|
};
|
|
|
|
precal_art_5000: precal@5000 {
|
|
reg = <0x5000 0x2f20>;
|
|
};
|
|
|
|
precal_art_9000: precal@9000 {
|
|
reg = <0x9000 0x2f20>;
|
|
};
|
|
};
|
|
};
|
|
|
|
partition@600000 {
|
|
label = "u_env";
|
|
reg = <0x600000 0x80000>;
|
|
};
|
|
|
|
partition@680000 {
|
|
label = "s_env";
|
|
reg = <0x680000 0x40000>;
|
|
};
|
|
|
|
partition@6c0000 {
|
|
label = "devinfo";
|
|
reg = <0x6c0000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@700000 {
|
|
label = "kernel";
|
|
reg = <0x700000 0xa100000>;
|
|
};
|
|
|
|
partition@d00000 {
|
|
label = "rootfs";
|
|
reg = <0xd00000 0x9b00000>;
|
|
};
|
|
|
|
partition@a800000 {
|
|
label = "alt_kernel";
|
|
reg = <0xa800000 0xa100000>;
|
|
};
|
|
|
|
partition@ae00000 {
|
|
label = "alt_rootfs";
|
|
reg = <0xae00000 0x9b00000>;
|
|
};
|
|
|
|
partition@14900000 {
|
|
label = "sysdiag";
|
|
reg = <0x14900000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@14b00000 {
|
|
label = "syscfg";
|
|
reg = <0x14b00000 0xb500000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
|
|
perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
|
wake-gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
|
|
clkreq-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
|
|
|
|
bridge@0,0 {
|
|
reg = <0x00000000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi2: wifi@1,0 {
|
|
compatible = "qcom,ath10k";
|
|
reg = <0x00010000 0 0 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qpic_bam {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
status = "okay";
|
|
};
|
|
|
|
&switch {
|
|
status = "okay";
|
|
};
|
|
|
|
&swport4 {
|
|
status = "okay";
|
|
label = "lan";
|
|
|
|
nvmem-cell-names = "mac-address";
|
|
nvmem-cells = <&macaddr_gmac1>;
|
|
};
|
|
|
|
&swport5 {
|
|
status = "okay";
|
|
label = "wan";
|
|
|
|
nvmem-cell-names = "mac-address";
|
|
nvmem-cells = <&macaddr_gmac0 0>;
|
|
};
|
|
|
|
&wifi0 {
|
|
pinctrl-0 = <&wifi_0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
|
|
qcom,coexist-support = <1>;
|
|
qcom,coexist-gpio-pin = <0x34>;
|
|
|
|
ieee80211-freq-limit = <2401000 2473000>;
|
|
qcom,ath10k-calibration-variant = "linksys-whw03v2";
|
|
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
nvmem-cells = <&precal_art_1000>, <&macaddr_gmac0 1>;
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "okay";
|
|
|
|
ieee80211-freq-limit = <5170000 5250000>;
|
|
qcom,ath10k-calibration-variant = "linksys-whw03v2";
|
|
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
nvmem-cells = <&precal_art_5000>, <&macaddr_gmac0 2>;
|
|
};
|
|
|
|
&wifi2 {
|
|
status = "okay";
|
|
|
|
ieee80211-freq-limit = <5735000 5835000>;
|
|
qcom,ath10k-calibration-variant = "linksys-whw03v2";
|
|
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
nvmem-cells = <&precal_art_9000>, <&macaddr_gmac0 3>;
|
|
};
|