David Bauer f828be4d10 ramips: use i2c-gpio driver for EX400 ...

Configure the i2c pins as GPIO outputs and use the i2c-gpio driver to
control the Semtech SX9512 touch controller.

This fixes spurious errors in i2c transactions even at 1kHz with the
native i2c driver.

leds green:wan: Setting an LED's brightness failed (-6)

Signed-off-by: David Bauer <mail@david-bauer.net>

2025-05-10 21:26:08 +02:00

..

base-files/etc

ramips: remove model name from LED labels

2020-10-02 14:51:57 +02:00

dts

ramips: use i2c-gpio driver for EX400

2025-05-10 21:26:08 +02:00

files/drivers

ramips: update drivers to be compatible with kernel 6.12

2025-05-07 00:40:05 +02:00

image

ramips: support Genexis EX400 touch controller

2025-05-10 21:26:08 +02:00

mt76x8

ramips: Add support for Xiaomi MiWiFi 3A

2025-04-20 21:50:22 +02:00

mt7620

ramips: mt7620: Add support for the devolo WiFi Repeater ac (MT 2767, 2779)

2025-04-22 22:06:28 +02:00

mt7621

ramips: support Genexis EX400 touch controller

2025-05-10 21:26:08 +02:00

patches-6.6

ramips: add Semtech SX9512 touch input driver

2025-05-10 21:26:08 +02:00

rt288x

ramips: rt288x: mark subtarget as source-only

2025-05-09 11:31:20 +02:00

rt305x

kernel: Activate CONFIG_NET_SWITCHDEV in generic config

2025-03-15 13:54:59 +01:00

rt3883

kernel: Activate CONFIG_NET_SWITCHDEV in generic config

2025-03-15 13:54:59 +01:00

Makefile

ramips: switch to Linux 6.6

2024-05-03 21:36:42 +01:00

modules.mk

ramips: add Semtech SX9512 touch input driver

2025-05-10 21:26:08 +02:00