Initial commit

package/network/config/ltq-vdsl-vr9-app/Makefile

@@ -0,0 +1,83 @@
+# Copyright (C) 2010 OpenWrt.org
+# Copyright (C) 2015-2016 Lantiq Beteiligungs GmbH & Co KG.
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ltq-vdsl-vr9-app
+PKG_VERSION:=4.17.18.6
+PKG_RELEASE:=5
+PKG_BASE_NAME:=dsl_cpe_control
+PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=@OPENWRT
+PKG_HASH:=da8bb929526a61aea0e153ef524331fcd472a1ebbc6d88ca017735a4f82ece02
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BASE_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=BSD-2-Clause
+
+PKG_BUILD_DEPENDS:=ltq-vdsl-vr9
+
+PKG_FLAGS:=nonshared
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ltq-vdsl-vr9-app
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Lantiq VDSL userland tool
+  URL:=http://www.lantiq.com/
+  DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base +libubox +libubus
+  PROVIDES:=ltq-dsl-app
+endef
+
+define Package/ltq-vdsl-vr9-app/description
+  Userland tool needed to control Lantiq VDSL CPE
+endef
+
+# ltq-vdsl-vr9-app uses a header provided by the MEI driver which has some
+# conditionals.
+#
+# Define them here with the default values they would get in the MEI driver,
+# have the same view on both sides.
+#
+# If you change them, you need to change them for the ltq-vdsl-vr9-app as well
+VDSL_APP_CFLAGS = \
+	-DMAX_CLI_PIPES=1 \
+	-DMEI_SUPPORT_DEBUG_STREAMS=1 \
+	-DMEI_SUPPORT_OPTIMIZED_FW_DL=1
+
+CONFIGURE_ARGS += \
+	--enable-vrx \
+	--enable-vrx-device=vr9 \
+	--enable-driver-include="-I$(STAGING_DIR)/usr/include/drv_vdsl_cpe_api" \
+	--enable-device-driver-include="-I$(STAGING_DIR)/usr/include/vdsl/" \
+	--enable-ifxos \
+	--enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
+	--enable-ifxos-library="-I$(STAGING_DIR)/usr/lib" \
+	--enable-add-appl-cflags="$(VDSL_APP_CFLAGS)"  \
+	--enable-debug \
+	--disable-dti \
+	--with-channels-per-line="1"
+
+CONFIGURE_ARGS += \
+	--enable-model=full \
+	--enable-dsl-ceoc=no
+#CONFIGURE_ARGS += --enable-model=lite
+#CONFIGURE_ARGS += --enable-model=footprint
+#CONFIGURE_ARGS += --enable-model=typical
+#CONFIGURE_ARGS += --enable-model=debug
+
+define Package/ltq-vdsl-vr9-app/install
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/sbin $(1)/etc/hotplug.d/dsl
+	$(INSTALL_BIN) ./files/dsl_control $(1)/etc/init.d/
+	$(INSTALL_BIN) ./files/10_atm.sh $(1)/etc/hotplug.d/dsl
+	$(INSTALL_BIN) ./files/10_ptm.sh $(1)/etc/hotplug.d/dsl
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin/vdsl_cpe_control
+	$(INSTALL_BIN) ./files/dsl_cpe_pipe.sh $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ltq-vdsl-vr9-app))

package/network/config/ltq-vdsl-vr9-app/files/10_atm.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_STATUS" ] && \
+[ "$DSL_TC_LAYER_STATUS" = "ATM" ] && \
+! grep -q "ltq_atm_vr9" /proc/modules || exit 0
+
+logger -p daemon.notice -t "dsl-notify" "Switching to TC-Layer ATM"
+
+if grep -q "ltq_ptm_vr9" /proc/modules ; then
+	logger -p daemon.notice -t "dsl-notify" "Loading ATM driver while EFM/PTM driver is loaded is not possible. Reboot is needed."
+	exit
+fi
+
+modprobe ltq_atm_vr9

package/network/config/ltq-vdsl-vr9-app/files/10_ptm.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+[ "$DSL_NOTIFICATION_TYPE" = "DSL_STATUS" ] && \
+[ "$DSL_TC_LAYER_STATUS" = "EFM" ] && \
+! grep -q "ltq_ptm_vr9" /proc/modules || exit 0
+
+logger -p daemon.notice -t "dsl-notify" "Switching to TC-Layer EFM/PTM"
+
+if grep -q "ltq_atm_vr9" /proc/modules ; then
+	logger -p daemon.notice -t "dsl-notify" "Loading EFM/PTM driver while ATM driver is loaded is not possible. Reboot is needed."
+	exit
+fi
+
+modprobe ltq_ptm_vr9

package/network/config/ltq-vdsl-vr9-app/files/dsl_control

@@ -0,0 +1,322 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2012 OpenWrt.org
+
+START=97
+USE_PROCD=1
+
+dslstat() {
+	ubus call dsl metrics
+}
+
+extra_command "dslstat" "Get DSL status information"
+
+#
+# ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
+# ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable (VECTORMODE_ENABLE))
+#
+# G.992.1 Annex A
+# G.992.2 Annex A
+# G.992.3 Annex A / L-US1 / L_US-2 / M
+# G.992.5 Annex A / M
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_a="05_01_04_00_4C_01_04_07"
+
+# G.992.1 Annex B
+# G.992.3 Annex B
+# G.992.5 Annex B
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_b="10_00_10_00_00_04_00_07"
+
+# G.992.1 Annex B
+# G.992.3 Annex B
+# G.992.3 Annex J
+# G.992.5 Annex B
+# G.992.5 Annex J
+# G.993.2 Annex A/B/C
+# G.993.5 Annex A/B/C
+xtse_xdsl_j="10_00_10_40_00_04_01_07"
+
+# G.992.1 Annex B
+xtse_xdsl_bdmt="10_00_00_00_00_00_00_00"
+
+# G.992.3 Annex B
+xtse_xdsl_b2="00_00_10_00_00_00_00_00"
+
+# G.992.5 Annex B
+xtse_xdsl_b2p="00_00_00_00_00_04_00_00"
+
+# ANSI T1.413
+xtse_xdsl_at1="01_00_00_00_00_00_00_00"
+
+# G.992.2 Annex A
+xtse_xdsl_alite="00_01_00_00_00_00_00_00"
+
+# G.992.1 Annex A
+xtse_xdsl_admt="04_00_00_00_00_00_00_00"
+
+# G.992.3 Annex A
+xtse_xdsl_a2="00_00_04_00_00_00_00_00"
+
+# G.992.5 Annex A
+xtse_xdsl_a2p="00_00_00_00_00_01_00_00"
+
+# G.992.3 Annex L
+xtse_xdsl_l="00_00_00_00_0C_00_00_00"
+
+# G.992.3 Annex M
+# G.992.5 Annex M
+xtse_xdsl_m="00_00_00_00_40_00_04_00"
+
+# G.992.3 Annex M
+xtse_xdsl_m2="00_00_00_00_40_00_00_00"
+
+# G.992.5 Annex M
+xtse_xdsl_m2p="00_00_00_00_00_00_04_00"
+
+#
+# ITU-T G.994.1 (06/2012) - Table 2 (Mandatory carrier sets)
+#
+
+# A43
+tone_adsl_a="0x142" # A43C + J43 + A43
+tone_vdsl_a="0x142" # A43C + J43 + A43
+
+# A43 + V43
+tone_adsl_av="0x142" # A43C + J43 + A43
+tone_vdsl_av="0x146" # A43C + J43 + A43 + V43
+
+# B43
+tone_adsl_b="0x81" # B43 + B43c
+tone_vdsl_b="0x1" # B43
+
+# B43 + V43
+tone_adsl_bv="0x81" # B43 + B43c
+tone_vdsl_bv="0x5" # B43 + V43
+
+# create DSL autoboot script. Used for SNR margin tweak and to set MAC address for vectoring error reports
+autoboot_script() {
+    echo "[WaitForConfiguration]={
+locs 0 $1
+dsmmcs $2
+}
+
+[WaitForLinkActivate]={
+}
+
+[WaitForRestart]={
+}
+
+[Common]={
+}" > /tmp/dsl.scr
+}
+
+lowlevel_cfg() {
+	echo "# VRX Low Level Configuration File
+#
+# Parameters must be separated by tabs or spaces.
+# Empty lines and comments will be ignored.
+#
+
+# nFilter
+#
+# NA     = -1
+# OFF    = 0
+# ISDN   = 1
+# POTS   = 2
+# POTS_2 = 3
+# POTS_3 = 4
+#
+#  (dec)
+    -1
+
+# nHsToneGroupMode nHsToneGroup_A       nHsToneGroup_V    nHsToneGroup_AV
+#
+# NA     = -1      NA         = -1      see               see
+# AUTO   = 0       VDSL2_B43  = 0x0001  nHsToneGroup_A    nHsToneGroup_A
+# MANUAL = 1       VDSL2_A43  = 0x0002
+#                  VDSL2_V43  = 0x0004
+#                  VDSL1_V43P = 0x0008
+#                  VDSL1_V43I = 0x0010
+#                  ADSL1_C43  = 0x0020
+#                  ADSL2_J43  = 0x0040
+#                  ADSL2_B43C = 0x0080
+#                  ADSL2_A43C = 0x0100
+#
+#  (dec)           (hex)                (hex)             (hex)
+     1             $1			$2		 0x0
+
+#   nBaseAddr     nIrqNum
+#
+#     (hex)        (dec)
+    0x1e116000      63
+
+# nUtopiaPhyAdr   nUtopiaBusWidth      nPosPhyParity
+#                 default(16b) = 0     NA   = -1
+#                 8-bit        = 1     ODD  = 0
+#                 16-bit       = 2
+#
+#
+#    (hex)            (dec)                (dec)
+      0xFF              0                    0
+
+# bNtrEnable
+#
+#  (dec)
+    0" > /tmp/lowlevel.cfg
+}
+
+get_macaddr() {
+	local name
+	config_get name $1 name
+	[ "$name" = "dsl0" ] && config_get $2 $1 macaddr
+}
+
+service_triggers() {
+	procd_add_reload_trigger network
+}
+
+start_service() {
+	local annex
+	local firmware
+	local tone
+	local tone_adsl
+	local tone_vdsl
+	local xtse
+	local xfer_mode
+	local line_mode
+	local tc_layer
+	local mode
+	local lowlevel
+	local snr
+	local macaddr
+
+	config_load network
+	config_get tone dsl tone
+	config_get annex dsl annex
+	config_get firmware dsl firmware
+	config_get xfer_mode dsl xfer_mode
+	config_get line_mode dsl line_mode
+	config_get snr dsl ds_snr_offset
+	config_foreach get_macaddr device macaddr
+
+	eval "xtse=\"\${xtse_xdsl_$annex}\""
+
+	case "${xfer_mode}" in
+	atm)
+		tc_layer="-T1:0x1:0x1_1:0x1:0x1"
+		;;
+	ptm)
+		tc_layer="-T2:0x1:0x1_2:0x1:0x1"
+		;;
+	esac
+
+	case "${line_mode}" in
+	adsl)
+		mode="-M1"
+
+		# mask out VDSL bits when ADSL is requested
+		xtse="${xtse%_*}_00"
+		;;
+	vdsl)
+		mode="-M2"
+
+		# mask out ADSL bits when VDSL is requested
+		xtse="00_00_00_00_00_00_00_${xtse##*_}"
+		;;
+	esac
+
+	local annexgpio="/sys/class/gpio/annex"
+	if [ -d "${annexgpio}a" ] && [ -d "${annexgpio}b" ]; then
+		case "${annex}" in
+			a*|l*|m*)
+				echo 1 > "${annexgpio}a/value"
+				echo 0 > "${annexgpio}b/value"
+				;;
+			b*|j*)
+				echo 0 > "${annexgpio}a/value"
+				echo 1 > "${annexgpio}b/value"
+				;;
+		esac
+	fi
+
+	if [ -z "${firmware}" ]; then
+		# search for the firmware provided by dsl-vrx200-firmware-xdsl-*
+		if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
+			case "${annex}" in
+			a*|l*|m*)
+				if [ -f "/lib/firmware/lantiq-vrx200-a.bin" ]; then
+					firmware="/lib/firmware/lantiq-vrx200-a.bin"
+				elif [ -f "/tmp/lantiq-vrx200-a.bin" ]; then
+					firmware="/tmp/lantiq-vrx200-a.bin"
+				elif [ -f "/lib/firmware/lantiq-vrx200-b.bin" ] && [ -f "/lib/firmware/lantiq-vrx200-b-to-a.bspatch" ]; then
+					bspatch /lib/firmware/lantiq-vrx200-b.bin \
+						/tmp/lantiq-vrx200-a.bin \
+						/lib/firmware/lantiq-vrx200-b-to-a.bspatch
+					firmware="/tmp/lantiq-vrx200-a.bin"
+				else
+					echo "firmware for annex a not found"
+					return 1
+				fi
+				;;
+			b*|j*)
+				if [ -f "/lib/firmware/vr9_dsl_fw_annex_b.bin" ]; then
+					firmware="/lib/firmware/vr9_dsl_fw_annex_b.bin"
+				elif [ -f "/lib/firmware/lantiq-vrx200-b.bin" ]; then
+					firmware="/lib/firmware/lantiq-vrx200-b.bin"
+				elif [ -f "/tmp/lantiq-vrx200-b.bin" ]; then
+					firmware="/tmp/lantiq-vrx200-b.bin"
+				elif [ -f "/lib/firmware/lantiq-vrx200-a.bin" ] && [ -f "/lib/firmware/lantiq-vrx200-a-to-b.bspatch" ]; then
+					bspatch /lib/firmware/lantiq-vrx200-a.bin \
+						/tmp/lantiq-vrx200-b.bin \
+						/lib/firmware/lantiq-vrx200-a-to-b.bspatch
+					firmware="/tmp/lantiq-vrx200-b.bin"
+				else
+					echo "firmware for annex b not found"
+					return 1
+				fi
+				;;
+			*)
+				echo "annex type not supported use a or b"
+				return 1
+				;;
+			esac
+		fi
+	fi
+
+	[ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
+	[ -f "${firmware}" ] || {
+		echo failed to find $firmware
+		return 1
+	}
+
+	eval "tone_adsl=\"\${tone_adsl_$tone}\""
+	eval "tone_vdsl=\"\${tone_vdsl_$tone}\""
+	[ -n "${tone_adsl}" ] && [ -n "${tone_vdsl}" ] && {
+		lowlevel_cfg "${tone_adsl}" "${tone_vdsl}"
+		lowlevel="-l /tmp/lowlevel.cfg"
+	}
+
+	[ -z "${snr}" ] && snr=0
+	[ -z "${macaddr}" ] && macaddr="00:00:00:00:00:00"
+	autoboot_script "$snr" "$macaddr"
+	autoboot="-a /tmp/dsl.scr -A /tmp/dsl.scr"
+
+	procd_open_instance
+	procd_set_param command /sbin/vdsl_cpe_control \
+			-i$xtse \
+			-n /sbin/dsl_notify.sh \
+			-f ${firmware} \
+			$lowlevel \
+			${mode} \
+			${tc_layer} \
+			$autoboot
+	procd_close_instance
+}
+
+stop_service() {
+	DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
+	DSL_INTERFACE_STATUS="DOWN" \
+		/sbin/dsl_notify.sh
+}

package/network/config/ltq-vdsl-vr9-app/files/dsl_cpe_pipe.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+pipe_no=0
+
+# use specified pipe no
+case "$1" in
+0|1|2)
+pipe_no=$1; shift; ;;
+esac
+
+
+#echo "Call dsl_pipe with $*"
+lock /var/lock/dsl_pipe
+echo $* > /tmp/pipe/dsl_cpe${pipe_no}_cmd
+result=$(cat /tmp/pipe/dsl_cpe${pipe_no}_ack)
+lock -u /var/lock/dsl_pipe
+
+echo "$result"

package/network/config/ltq-vdsl-vr9-app/patches/100-compat.patch

@@ -0,0 +1,11 @@
+--- a/src/dsl_cpe_init_cfg.c
++++ b/src/dsl_cpe_init_cfg.c
+@@ -38,7 +38,7 @@ DSL_InitData_t gInitCfgData =
+       DSL_DEV_HS_TONE_GROUP_CLEANED, \
+       DSL_DEV_HS_TONE_GROUP_CLEANED, \
+       DSL_DEV_HS_TONE_GROUP_CLEANED, \
+-      0x1E116000, 0x37, -1),
++      0x1E116000, 0x3f, -1),
+    DSL_CPE_SIC_SET(DSL_TC_ATM, DSL_EMF_TC_CLEANED, DSL_EMF_TC_CLEANED, DSL_SYSTEMIF_MII, \
+                    DSL_TC_EFM, DSL_EMF_TC_CLEANED, DSL_EMF_TC_CLEANED, DSL_SYSTEMIF_MII),
+    DSL_CPE_MAC_CFG_SET(DSL_EFM_SPEED_100, DSL_EFM_DUPLEX_FULL, DSL_EFM_FLOWCTRL_ON, DSL_EFM_AUTONEG_OFF, \

package/network/config/ltq-vdsl-vr9-app/patches/101-musl.patch

@@ -0,0 +1,10 @@
+--- a/src/dsl_cpe_control.c
++++ b/src/dsl_cpe_control.c
+@@ -11,6 +11,7 @@
+ /*
+ Includes
+ */
++#include <limits.h>
+ #include "dsl_cpe_control.h"
+ #include "dsl_cpe_cli.h"
+ #include "dsl_cpe_cli_console.h"

package/network/config/ltq-vdsl-vr9-app/patches/200-autoboot.patch

@@ -0,0 +1,86 @@
+This enables automatic connection after the control daemon is started,
+and also stops the connection on termination.
+
+Using the autoboot restart command is necessary because the stop command
+doesn't actually stop the connection, and would also leave the driver in
+a state where an explicit start command is necessary to connect again.
+
+--- a/src/dsl_cpe_init_cfg.c
++++ b/src/dsl_cpe_init_cfg.c
+@@ -27,7 +27,7 @@ DSL_InitData_t gInitCfgData =
+    DSL_CPE_FW2_SET(DSL_NULL, 0x0),
+    DSL_CPE_XTU_SET(0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x7),
+    DSL_CPE_LINE_INV_NE_SET(DSL_NULL),
+-   DSL_CPE_AUTOBOOT_CTRL_SET(DSL_AUTOBOOT_CTRL_STOP),
++   DSL_CPE_AUTOBOOT_CTRL_SET(DSL_AUTOBOOT_CTRL_START),
+    DSL_CPE_AUTOBOOT_CFG_SET(DSL_FALSE, DSL_FALSE, DSL_FALSE),
+    DSL_CPE_TEST_MODE_CTRL_SET(DSL_TESTMODE_DISABLE),
+    DSL_CPE_LINE_ACTIVATE_CTRL_SET(DSL_G997_INHIBIT_LDSF, DSL_G997_INHIBIT_ACSF, DSL_G997_NORMAL_STARTUP),
+--- a/src/dsl_cpe_control.c
++++ b/src/dsl_cpe_control.c
+@@ -6515,10 +6515,13 @@ DSL_CPE_STATIC  void DSL_CPE_Termination
+ DSL_CPE_STATIC  DSL_void_t DSL_CPE_Termination (void)
+ {
+ #ifdef INCLUDE_DSL_CPE_CLI_SUPPORT
+-   DSL_int_t nDevice = 0;
+    DSL_char_t buf[32] = "quit";
+ #endif
+ 
++   DSL_Error_t nRet = DSL_SUCCESS;
++   DSL_int_t nDevice = 0;
++   DSL_AutobootConfig_t sAutobootCfg;
++   DSL_AutobootControl_t sAutobootCtl;
+    DSL_CPE_Control_Context_t *pCtrlCtx;
+ 
+    pCtrlCtx = DSL_CPE_GetGlobalContext();
+@@ -6527,6 +6530,50 @@ DSL_CPE_STATIC  DSL_void_t DSL_CPE_Termi
+       pCtrlCtx->bRun = DSL_FALSE;
+    }
+ 
++   for (nDevice = 0; nDevice < DSL_CPE_MAX_DSL_ENTITIES; ++nDevice)
++   {
++      g_bWaitBeforeConfigWrite[nDevice]    = DSL_TRUE;
++      g_bWaitBeforeLinkActivation[nDevice] = DSL_TRUE;
++      g_bWaitBeforeRestart[nDevice]        = DSL_TRUE;
++
++      g_bAutoContinueWaitBeforeConfigWrite[nDevice]    = DSL_FALSE;
++      g_bAutoContinueWaitBeforeLinkActivation[nDevice] = DSL_FALSE;
++      g_bAutoContinueWaitBeforeRestart[nDevice]        = DSL_FALSE;
++
++      memset(&sAutobootCfg, 0x0, sizeof(DSL_AutobootConfig_t));
++      sAutobootCfg.data.nStateMachineOptions.bWaitBeforeConfigWrite    = DSL_TRUE;
++      sAutobootCfg.data.nStateMachineOptions.bWaitBeforeLinkActivation = DSL_TRUE;
++      sAutobootCfg.data.nStateMachineOptions.bWaitBeforeRestart        = DSL_TRUE;
++
++      nRet = (DSL_Error_t)DSL_CPE_Ioctl(
++         DSL_CPE_GetGlobalContext()->fd[nDevice],
++         DSL_FIO_AUTOBOOT_CONFIG_SET, (DSL_int_t)&sAutobootCfg);
++
++      if (nRet < DSL_SUCCESS)
++      {
++         DSL_CCA_DEBUG(DSL_CCA_DBG_ERR, (DSL_CPE_PREFIX
++            "Autoboot configuration for device (%d) failed!, nRet = %d!"
++            DSL_CPE_CRLF, nDevice, sAutobootCtl.accessCtl.nReturn));
++      }
++
++      memset(&sAutobootCtl, 0, sizeof(DSL_AutobootControl_t));
++      sAutobootCtl.data.nCommand = DSL_AUTOBOOT_CTRL_RESTART;
++
++      nRet = (DSL_Error_t)DSL_CPE_Ioctl(
++         DSL_CPE_GetGlobalContext()->fd[nDevice],
++         DSL_FIO_AUTOBOOT_CONTROL_SET, (DSL_int_t)&sAutobootCtl);
++
++      if (nRet < DSL_SUCCESS)
++      {
++         DSL_CCA_DEBUG(DSL_CCA_DBG_ERR, (DSL_CPE_PREFIX
++            "Autoboot restart for device (%d) failed!, nRet = %d!"
++            DSL_CPE_CRLF, nDevice, sAutobootCtl.accessCtl.nReturn));
++      }
++   }
++
++   DSL_CCA_DEBUG(DSL_CCA_DBG_MSG, (DSL_CPE_PREFIX
++      "Autoboot restart executed" DSL_CPE_CRLF));
++
+ #ifdef INCLUDE_DSL_CPE_CLI_SUPPORT
+    for (nDevice = 0; nDevice < DSL_CPE_MAX_DSL_ENTITIES; nDevice++)
+    {

package/network/config/ltq-vdsl-vr9-app/patches/201-sigterm.patch

@@ -0,0 +1,19 @@
+--- a/src/dsl_cpe_control.c
++++ b/src/dsl_cpe_control.c
+@@ -6504,7 +6504,7 @@ DSL_CPE_STATIC  void DSL_CPE_Termination
+    /* ignore the signal, we'll handle by ourself */
+    signal (sig, SIG_IGN);
+ 
+-   if (sig == SIGINT)
++   if (sig == SIGINT || sig == SIGTERM)
+    {
+       DSL_CCA_DEBUG(DSL_CCA_DBG_MSG, (DSL_CPE_PREFIX "terminated" DSL_CPE_CRLF));
+       DSL_CPE_Termination ();
+@@ -6803,6 +6803,7 @@ DSL_int_t dsl_cpe_daemon (
+ 
+ #ifndef RTEMS
+    signal (SIGINT, DSL_CPE_TerminationHandler);
++   signal (SIGTERM, DSL_CPE_TerminationHandler);
+ #endif /* RTEMS*/
+ 
+    /* Open DSL_CPE_MAX_DSL_ENTITIES devices*/

package/network/config/ltq-vdsl-vr9-app/patches/300-ubus.patch

@@ -0,0 +1,50 @@
+--- a/src/dsl_cpe_control.c
++++ b/src/dsl_cpe_control.c
+@@ -177,6 +177,9 @@ extern DSL_Error_t DSL_CPE_Pipe_StaticRe
+ #endif /* INCLUDE_DSL_RESOURCE_STATISTICS*/
+ #endif
+ 
++extern void ubus_init();
++extern void ubus_deinit();
++
+ DSL_char_t *g_sFirmwareName1 = DSL_NULL;
+ DSL_FirmwareFeatures_t g_nFwFeatures1 = {DSL_FW_XDSLMODE_CLEANED, DSL_FW_XDSLFEATURE_CLEANED,
+    DSL_FW_XDSLFEATURE_CLEANED};
+@@ -6806,6 +6809,8 @@ DSL_int_t dsl_cpe_daemon (
+    signal (SIGTERM, DSL_CPE_TerminationHandler);
+ #endif /* RTEMS*/
+ 
++   ubus_init();
++
+    /* Open DSL_CPE_MAX_DSL_ENTITIES devices*/
+    for (nDevice = 0; nDevice < DSL_CPE_MAX_DSL_ENTITIES; nDevice++)
+    {
+@@ -7260,6 +7265,7 @@ DSL_int_t dsl_cpe_daemon (
+ #endif /* INCLUDE_DSL_CPE_CLI_SUPPORT */
+ 
+ DSL_CPE_CONTROL_EXIT:
++   ubus_deinit();
+ 
+ #ifdef INCLUDE_DSL_BONDING
+    DSL_CPE_BND_Stop((DSL_CPE_BND_Context_t*)pCtrlCtx->pBnd);
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -11,7 +11,7 @@ else
+ dsl_cpe_control_common_ldflags =
+ endif
+ 
+-dsl_cpe_control_LDADD = -lpthread -lrt
++dsl_cpe_control_LDADD = -lpthread -lrt -lubox -lubus
+ 
+ if INCLUDE_DSL_CPE_DTI_SUPPORT
+     dsl_cpe_control_LDADD += -ldti_agent
+@@ -66,7 +66,8 @@ dsl_cpe_control_SOURCES = \
+ 	dsl_cpe_control.c \
+ 	dsl_cpe_init_cfg.c \
+ 	dsl_cpe_linux.c \
+-	dsl_cpe_debug.c
++	dsl_cpe_debug.c \
++	dsl_cpe_ubus.c
+ 
+ dsl_cpe_control_SOURCES += \
+ 	$(dsl_cpe_control_dti_sources)