Initial commit

target/linux/apm821xx/base-files/etc/board.d/01_leds

@@ -0,0 +1,50 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+meraki,mr24)
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
+	ucidef_set_led_wlan "wlan5g_1" "WIFI 5GHz-1" "green:wlan-0" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g_0" "WIFI 5GHz-0" "green:wlan-1" "phy1radio"
+	ucidef_set_led_wlan "wlan2g_1" "WIFI 2.4GHz-1" "green:wlan-2" "phy0tpt"
+	ucidef_set_led_wlan "wlan2g_0" "WIFI 2.4GHz-0" "green:wlan-3" "phy0radio"
+	;;
+
+meraki,mx60)
+	ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x20"
+	ucidef_set_led_switch "lan1" "LAN1" "green:lan-0" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "green:lan-1" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "green:lan-2" "switch0" "0x04"
+	ucidef_set_led_switch "lan4" "LAN4" "green:lan-3" "switch0" "0x02"
+	;;
+
+netgear,wndap620)
+	ucidef_set_led_switch "lan_act" "LAN (Activity)" "green:activity" "switch0" "0x04" "0x0f" "rx tx"
+	ucidef_set_led_switch "lan_100" "LAN 100Mbps" "amber:lan" "switch0" "0x04" "0x04" "link"
+	ucidef_set_led_switch "lan_1000" "LAN 1000Mbps" "green:lan" "switch0" "0x04" "0x08" "link"
+	;;
+
+netgear,wndap660)
+	ucidef_set_led_netdev "lan_act" "LAN (Activity)" "green:activity" "eth0"
+	ucidef_set_led_switch "lan1_100" "LAN 100Mbps" "amber:lan-1" "switch0" "0x02" "0x04" "link"
+	ucidef_set_led_switch "lan1_1000" "LAN 1000Mbps" "green:lan-1" "switch0" "0x02" "0x08" "link"
+	ucidef_set_led_switch "lan2_100" "LAN 100Mbps" "amber:lan-2" "switch0" "0x04" "0x04" "link"
+	ucidef_set_led_switch "lan2_1000" "LAN 1000Mbps" "green:lan-2" "switch0" "0x04" "0x08" "link"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan-0" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan-1" "phy1tpt"
+	;;
+
+netgear,wndr4700)
+	ucidef_set_led_switch "wan_green" "WAN (green)" "green:wan" "switch0" "0x20"
+	ucidef_set_led_netdev "wan_yellow" "WAN (yellow)" "yellow:wan" "eth0.2" "tx rx"
+	;;
+
+esac
+
+board_config_flush
+
+exit 0

target/linux/apm821xx/base-files/etc/board.d/02_network

@@ -0,0 +1,34 @@
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+meraki,mr24|\
+wd,mybooklive|\
+wd,mybooklive-duo)
+	ucidef_set_interface_lan "eth0" "dhcp"
+	;;
+netgear,wndap620)
+	ucidef_add_switch "switch0" "2:lan" "5@eth0"
+	;;
+netgear,wndap660)
+	ucidef_add_switch "switch0" "1:lan" "2:lan" "5@eth0"
+	;;
+meraki,mx60|\
+netgear,wndr4700)
+	ucidef_add_switch "switch0" \
+		"0@eth0" "4:lan" "3:lan" "2:lan" "1:lan" "5:wan"
+	;;
+
+*)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/apm821xx/base-files/etc/diag.sh

@@ -0,0 +1,50 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+. /lib/functions/leds.sh
+
+get_status_led() {
+	local status_led_file
+
+	status_led_file=$(find /sys/class/leds/ -name "*:power" | head -n1)
+	if [ -d "$status_led_file" ]; then
+		basename $status_led_file
+		return
+	fi;
+}
+
+get_failsafe_led() {
+	local status_led_file
+
+	status_led_file=$(find /sys/class/leds/ -name "*:fault" | head -n1)
+	if [ -d "$status_led_file" ]; then
+		basename $status_led_file
+		return
+	fi;
+}
+
+set_state() {
+	status_led=$(get_status_led)
+
+	[ -z "$status_led" ] && return
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_off
+		status_led=$(get_failsafe_led)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+        upgrade)
+                status_led_blink_preinit_regular
+                ;;
+	done)
+		status_led_on
+		;;
+	esac
+}

target/linux/apm821xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

@@ -0,0 +1,19 @@
+#!/bin/ash
+
+[ "$ACTION" = "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n "$PHYNBR" ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$board" in
+netgear,wndap620|\
+netgear,wndap660)
+	macaddr_add $(mtd_get_mac_ascii u-boot-env baseMAC) $(($PHYNBR + 1)) > /sys${DEVPATH}/macaddress
+	;;
+esac

target/linux/apm821xx/base-files/etc/init.d/hwmon_fancontrol

@@ -0,0 +1,15 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+
+boot() {
+	# configuring onboard temp/fan controller to run the fan on its own
+	# for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
+
+	case $(board_name) in
+	netgear,wndr4700)
+		path_to_hwmon='/sys/devices/platform/plb/plb:opb/4ef600700.i2c/i2c-0/0-001b/hwmon/hwmon1'
+		echo 1 > "$path_to_hwmon/pwm1_mode"
+		;;
+	esac
+}

target/linux/apm821xx/base-files/etc/inittab

@@ -0,0 +1,4 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+::askconsole:/usr/libexec/login.sh
+ttyS0::askfirst:/usr/libexec/login.sh

target/linux/apm821xx/base-files/etc/uci-defaults/04_led_migration

@@ -0,0 +1,56 @@
+. /lib/functions.sh
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+
+case "$board" in
+meraki,mr24)
+	migrate_leds "orange:power=amber:fault" \
+		":wifi1=:wlan-0" \
+		":wifi2=:wlan-1" \
+		":wifi3=:wlan-2" \
+		":wifi4=:wlan-3"
+	;;
+meraki,mx60)
+	migrate_leds ":lan1=:lan-0" \
+		":lan2=:lan-1" \
+		":lan3=:lan-2" \
+		":lan4=:lan-3" \
+		"orange:power=amber:power" \
+		"orange:wan=amber:wan"
+	;;
+netgear,wndap620)
+	migrate_leds ":activity=:lan-0" \
+		":test=:fault" \
+		":wlan2g=:wlan-0" \
+		":wlan5g=:wlan-1" \
+		":link100=:lan" \
+		":link1000=:lan-1"
+	;;
+netgear,wndap660)
+	migrate_leds ":activity=:lan-0" \
+		":test=:fault" \
+		":wlan2g=:wlan-0" \
+		":wlan5g=:wlan-1" \
+		":lan1-link100=:lan-1" \
+		":lan1-link1000=:lan-1" \
+		":lan2-link100=:lan-2" \
+		":lan2-link1000=:lan-2"
+	;;
+netgear,wndr4700)
+	migrate_leds "orange:power=amber:fault" \
+		"white:logo=white:indicator" \
+		"green:hd=green:disk" \
+		"red:hd=red:disk-err"
+	;;
+wd,mybooklive)
+	migrate_leds "red:power=red:fault" \
+		"blue:power=blue:disk"
+	;;
+esac
+
+remove_devicename_leds
+
+migrations_apply system
+
+exit 0

target/linux/apm821xx/base-files/etc/uci-defaults/05_fix-compat-version

@@ -0,0 +1,13 @@
+. /lib/functions.sh
+
+case "$(board_name)" in
+meraki,mx60|\
+netgear,wndap620|\
+netgear,wndap660|\
+netgear,wndr4700)
+	uci set system.@system[0].compat_version="2.0"
+	uci commit system
+	;;
+esac
+
+exit 0

target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx

@@ -0,0 +1,13 @@
+preinit_set_mac_address() {
+	. /lib/functions.sh
+
+	case $(board_name) in
+		meraki,mr24|\
+		meraki,mx60)
+			mac_lan=$(mtd_get_mac_binary_ubi board-config 0x66)
+			[ -n "$mac_lan" ] && ip link set eth0 address "$mac_lan"
+			;;
+	esac
+}
+
+boot_hook_add preinit_main preinit_set_mac_address

target/linux/apm821xx/base-files/lib/preinit/05_set_preinit_iface_apm821xx

@@ -0,0 +1,5 @@
+apm821xx_set_preinit_iface() {
+	ifname=eth0
+}
+
+boot_hook_add preinit_main apm821xx_set_preinit_iface

target/linux/apm821xx/base-files/lib/preinit/79_move_config

@@ -0,0 +1,18 @@
+BOOTPART=/dev/sda1
+
+move_config() {
+	. /lib/functions.sh
+	. /lib/upgrade/common.sh
+
+	case "$(board_name)" in
+	wd,mybooklive)
+		if [ -b $BOOTPART ]; then
+			mkdir -p /boot
+			mount -t ext4 -o rw,noatime $BOOTPART /boot
+			[ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" /
+		fi
+		;;
+	esac
+}
+
+boot_hook_add preinit_mount_root move_config

target/linux/apm821xx/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,47 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	local board=$(board_name)
+
+	case "$board" in
+	wd,mybooklive)
+		mbl_do_platform_check "$1"
+		return $?;
+		;;
+	*)
+		return 0
+		;;
+	esac
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	wd,mybooklive)
+		mbl_do_upgrade "$1"
+		;;
+	meraki,mr24|\
+	meraki,mx60|\
+	netgear,wndap620|\
+	netgear,wndap660|\
+	netgear,wndr4700)
+		nand_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}
+
+platform_copy_config() {
+	local board=$(board_name)
+
+	case "$board" in
+	wd,mybooklive|\
+	wd,mybooklive-duo)
+		mbl_copy_config
+		;;
+	esac
+}

target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh

@@ -0,0 +1,94 @@
+. /lib/functions.sh
+
+# copied from x86's platform.sh
+
+mbl_do_platform_check() {
+	local diskdev partdev diff
+
+	[ "$#" -gt 1 ] && return 1
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	get_partitions "/dev/$diskdev" bootdisk
+
+	#extract the boot sector from the image
+	get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b 2>/dev/null
+
+	get_partitions /tmp/image.bs image
+
+	#compare tables
+	diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+
+	rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
+
+	if [ -n "$diff" ]; then
+		echo "Partition layout has changed. Full image will be written."
+		ask_bool 0 "Abort" && exit 1
+		return 0
+	fi
+
+	return 0;
+}
+
+mbl_do_upgrade() {
+	local diskdev partdev diff
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	sync
+
+	if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
+		get_partitions "/dev/$diskdev" bootdisk
+
+		#extract the boot sector from the image
+		get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b
+
+		get_partitions /tmp/image.bs image
+
+		#compare tables
+		diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+	else
+		diff=1
+	fi
+
+	if [ -n "$diff" ]; then
+		get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync
+
+		# Separate removal and addtion is necessary; otherwise, partition 1
+		# will be missing if it overlaps with the old partition 2
+		partx -d - "/dev/$diskdev"
+		partx -a - "/dev/$diskdev"
+
+		return 0
+	fi
+
+	#iterate over each partition from the image and write it to the boot disk
+	while read part start size; do
+		if export_partdevice partdev $part; then
+			echo "Writing image to /dev/$partdev..."
+			get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
+		else
+			echo "Unable to find partition $part device, skipped."
+	fi
+	done < /tmp/partmap.image
+
+	#copy partition uuid
+	echo "Writing new UUID to /dev/$diskdev..."
+	get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
+}
+
+mbl_copy_config() {
+	local partdev
+
+	if export_partdevice partdev 1; then
+		mount -t ext4 -o rw,noatime "/dev/$partdev" /mnt
+		cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+		umount /mnt
+	fi
+}