Initial commit

target/linux/apm821xx/dts/netgear-wndap6x0.dtsi

@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for Netgear WNDAP620 and WNDAP660
+ */
+
+#include <dt-bindings/leds/common.h>
+#include "apm82181.dtsi"
+
+/ {
+	aliases {
+		serial0 = &UART0;
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
+
+&CRYPTO {
+	status = "okay";
+};
+
+&PKA {
+	status = "okay";
+};
+
+&TRNG {
+	status = "okay";
+};
+
+&ndfc {
+	status = "okay";
+	/* 32 MiB SLC NAND Flash */
+
+	nand {
+		nand-is-boot-medium;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				compatible = "u-boot,env";
+				label = "u-boot-env";
+				reg = <0x00100000 0x0004000>;
+				read-only;
+
+				ethaddr {
+				};
+
+				bootcmd {
+				};
+
+				serno {
+				};
+
+				ProductID {
+				};
+
+				HardwareVer {
+				};
+			};
+
+			/* 0x104000 - 0x10ffff free */
+
+			partition@110000 {
+				label = "firmware";
+				reg = <0x00110000 0x01ac0000>;
+
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					/*
+					 * The u-boot bootloader will look at this
+					 * offset (0x110000) for an uImage binary.
+					 */
+					label = "kernel";
+					reg = <0x00000000 0x005f0000>;
+				};
+
+				partition@5f0000 {
+					label = "ubi";
+					reg = <0x005f0000 0x014d0000>;
+				};
+			};
+
+			partition@1bd0000 {
+				/*
+				 * original vendor device-tree - do not use or
+				 * overwrite. The original u-boot also supports
+				 * the gzipped legacy monolithic/Multi-File Image
+				 * format, which is a better choice.
+				 */
+				label = "device-tree";
+				reg = <0x01bd0000 0x0010000>;
+				read-only;
+			};
+
+			partition@1be0000 {
+				label = "var";
+				reg = <0x01be0000 0x00400000>;
+				read-only;
+			};
+
+			partition@1fe0000 {
+				label = "manudata";
+				reg = <0x01fe0000 0x00020000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&UART0 {
+	status = "okay";
+};
+
+&GPIO0 {
+	status = "okay";
+};
+
+&EMAC0 {
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+		asym-pause;
+	};
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&POB0 {
+	keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset Button";
+			gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
+			debounce-interval = <60>;
+		};
+	};
+
+	LEDS: leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_FAULT;
+			gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <0>;
+			gpios = <&GPIO0 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			function-enumerator = <0>;
+			gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			function-enumerator = <1>;
+			gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		internal-antenna {
+			gpio-export,name = "wndap6x0:internal-antenna";
+			gpio-export,output = <1>;
+			gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		external-antenna {
+			gpio-export,name = "wndap6x0:external-antenna";
+			gpio-export,output = <0>;
+			gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		mains-powered {
+			/*
+			 * Input pin describing what powers the AP
+			 * 0/Low = PoE
+			 * 1/High = 12v mains powered
+			 */
+			gpio-export,name = "wndap620:mains-powered";
+			gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	rtl8367b {
+		compatible = "realtek,rtl8367b";
+		realtek,extif0 = <1 2 1 1 1 1 1 1 2>;
+		mii-bus = <&mdio0>;
+	};
+};
+
+&PCIE0 {
+	status = "okay";
+};
+
+&IIC0 {
+	status = "okay";
+
+	at24@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+		pagesize = <16>;
+		read-only;
+	};
+};