Initial commit

target/linux/armsr/base-files/etc/board.d/01_led

@@ -0,0 +1,19 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+	ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
+	ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/armsr/base-files/etc/board.d/02_network

@@ -0,0 +1,18 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	traverse,ten64)
+		ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
+		ucidef_set_interface_wan "eth6"
+		;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/armsr/base-files/etc/board.d/03_gpio_switches

@@ -0,0 +1,31 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+KERNEL_MAJOR=$(uname -r | awk -F '.' '{print $1}')
+KERNEL_MINOR=$(uname -r | awk -F '.' '{print $2}')
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+	if [ "${KERNEL_MAJOR}" -ge "6" ] && [ "${KERNEL_MINOR}" -ge "6" ]; then
+		I2C_GPIO_BASE=640
+	else
+		I2C_GPIO_BASE=368
+	fi
+	ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "$(($I2C_GPIO_BASE + 8))"
+	ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "$(($I2C_GPIO_BASE + 9))"
+	ucidef_add_gpio_switch "lte_disable" "Cell Modem Airplane mode" "$((I2C_GPIO_BASE + 10))"
+	ucidef_add_gpio_switch "gnss_disable" "Cell Modem Disable GNSS receiver" "$(($I2C_GPIO_BASE + 11))"
+	ucidef_add_gpio_switch "lower_sfp_txidsable" "Lower SFP+ TX Disable" "$(($I2C_GPIO_BASE + 1))"
+	ucidef_add_gpio_switch "upper_sfp_txdisable" "Upper SFP+ TX Disable" "$(($I2C_GPIO_BASE + 5))"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/armsr/base-files/etc/inittab

@@ -0,0 +1,10 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyAMA0::askfirst:/usr/libexec/login.sh
+@GRUB_SERIAL@::askfirst:/usr/libexec/login.sh
+tty0::askfirst:/usr/libexec/login.sh
+hvc0::askfirst:/usr/libexec/login.sh
+ttymxc0::askfirst:/usr/libexec/login.sh
+ttymxc1::askfirst:/usr/libexec/login.sh
+ttymxc2::askfirst:/usr/libexec/login.sh
+ttySC0::askfirst:/usr/libexec/login.sh

target/linux/armsr/base-files/etc/uci-defaults/05-migrate-ten64-gpio

@@ -0,0 +1,37 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# This script migrates GPIO switch pin numbers
+# from kernel versions prior to 6.6
+# See https://lists.openwrt.org/pipermail/openwrt-devel/2024-March/042448.html
+
+. /lib/functions.sh
+
+ten64_update_gpioswitch_num() {
+	local section="$1"
+	config_get gpio_pin  "${section}" gpio_pin
+	config_get gpio_name "${section}" name
+	if [ -z "${gpio_pin}" ]; then
+		return
+	fi
+	local this_pin_name=$(uci get "system.${section}.name")
+	if [ "${gpio_pin}" -lt 640 ]; then
+		new_pin_value=$(( $gpio_pin + 272 ))
+		uci set "system.${section}.gpio_pin=${new_pin_value}"
+	fi
+}
+
+board=$(board_name)
+if [ "${board}" != "traverse,ten64" ]; then
+	exit 0
+fi
+
+KERNEL_MINOR=$(uname -r | awk -F '.' '{print $2}')
+if [ "${KERNEL_MINOR}" -lt "6" ]; then
+	exit 0
+fi
+
+config_load system
+config_foreach ten64_update_gpioswitch_num gpio_switch
+
+exit 0

target/linux/armsr/base-files/lib/preinit/01_sysinfo_acpi

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+sanitize_name_arm64() {
+	sed -e '
+		y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/;
+		s/[^a-z0-9_-]\+/-/g;
+		s/^-//;
+		s/-$//;
+	' "$@"
+}
+
+do_sysinfo_arm64() {
+	local vendor product file
+
+	for file in sys_vendor board_vendor; do
+		vendor="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
+		case "$vendor" in
+		empty | \
+		System\ manufacturer | \
+		To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
+			continue
+			;;
+		esac
+		[ -n "$vendor" ] && break
+	done
+
+	for file in product_name board_name; do
+		product="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
+		case "$vendor:$product" in
+		?*:empty | \
+		?*:System\ Product\ Name | \
+		?*:To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
+			continue
+			;;
+		?*:?*)
+			break
+			;;
+		esac
+	done
+
+	[ -d "/sys/firmware/devicetree/base" ] && return
+
+	[ -n "$vendor" -a -n "$product" ] || return
+
+	mkdir -p /tmp/sysinfo
+
+	echo "$vendor $product" > /tmp/sysinfo/model
+
+	sanitize_name_arm64 /tmp/sysinfo/model > /tmp/sysinfo/board_name
+}
+
+boot_hook_add preinit_main do_sysinfo_arm64

target/linux/armsr/base-files/lib/preinit/79_move_config

@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+move_config() {
+	local partdev parttype=ext4
+
+	. /lib/upgrade/common.sh
+
+	if export_bootdevice && export_partdevice partdev 1; then
+		part_magic_fat "/dev/$partdev" && parttype=vfat
+		if mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt; then
+			if [ -f "/mnt/$BACKUP_FILE" ]; then
+				mv -f "/mnt/$BACKUP_FILE" /
+			fi
+			umount /mnt
+		fi
+	fi
+}
+
+boot_hook_add preinit_mount_root move_config

target/linux/armsr/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+RAMFS_COPY_BIN="/usr/sbin/blkid"
+
+platform_check_image() {
+	local board=$(board_name)
+	local diskdev partdev diff
+	[ "$#" -gt 1 ] && return 1
+
+	v "Board is ${board}"
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		v "platform_check_image: Unable to determine upgrade device"
+		return 1
+	}
+
+	get_partitions "/dev/$diskdev" bootdisk
+
+	v "Extract boot sector from the image"
+	get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
+
+	get_partitions /tmp/image.bs image
+
+	#compare tables
+	diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+
+	rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
+
+	if [ -n "$diff" ]; then
+		v "Partition layout has changed. Full image will be written."
+		ask_bool 0 "Abort" && exit 1
+		return 0
+	fi
+}
+
+platform_copy_config() {
+	local partdev parttype=ext4
+
+	if export_partdevice partdev 1; then
+		part_magic_fat "/dev/$partdev" && parttype=vfat
+		mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
+		cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+		umount /mnt
+	else
+		v "ERROR: Unable to find partition to copy config data to"
+	fi
+
+	sleep 5
+}
+
+# To avoid writing over any firmware
+# files (e.g ubootefi.var or firmware/X/ aka EBBR)
+# Copy efi/openwrt and efi/boot from the new image
+# to the existing ESP
+platform_do_upgrade_efi_system_partition() {
+	local image_file=$1
+	local target_partdev=$2
+	local image_efisp_start=$3
+	local image_efisp_size=$4
+
+	v "Updating ESP on ${target_partdev}"
+	NEW_ESP_DIR="/mnt/new_esp_loop"
+	CUR_ESP_DIR="/mnt/cur_esp"
+	mkdir "${NEW_ESP_DIR}"
+	mkdir "${CUR_ESP_DIR}"
+
+	get_image_dd "$image_file" of="/tmp/new_efi_sys_part.img" \
+		skip="$image_efisp_start" count="$image_efisp_size"
+
+	mount -t vfat -o loop -o ro /tmp/new_efi_sys_part.img "${NEW_ESP_DIR}"
+	if [ ! -d "${NEW_ESP_DIR}/efi/boot" ]; then
+		v "ERROR: Image does not contain EFI boot files (/efi/boot)"
+		return 1
+	fi
+
+	mount -t vfat "/dev/$partdev" "${CUR_ESP_DIR}"
+
+	for d in $(find "${NEW_ESP_DIR}/efi/" -mindepth 1 -maxdepth 1 -type d); do
+		v "Copying ${d}"
+		newdir_bname=$(basename "${d}")
+		rm -rf "${CUR_ESP_DIR}/efi/${newdir_bname}"
+		cp -r "${d}" "${CUR_ESP_DIR}/efi"
+	done
+
+	umount "${NEW_ESP_DIR}"
+	umount "${CUR_ESP_DIR}"
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+	local diskdev partdev diff
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		v "platform_do_upgrade: Unable to determine upgrade device"
+		return 1
+	}
+
+	sync
+
+	if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
+		get_partitions "/dev/$diskdev" bootdisk
+
+		v "Extract boot sector from the image"
+		get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
+
+		get_partitions /tmp/image.bs image
+
+		#compare tables
+		diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+	else
+		diff=1
+	fi
+
+	# Only change the partition table if sysupgrade -p is set,
+	# otherwise doing so could interfere with embedded "single storage"
+	# (e.g SoC boot from SD card) setups, as well as other user
+	# created storage (like uvol)
+	if [ -n "$diff" ] && [ "${UPGRADE_OPT_SAVE_PARTITIONS}" = "0" ]; then
+		# Need to remove partitions before dd, otherwise the partitions
+		# that are added after will have minor numbers offset
+		partx -d - "/dev/$diskdev"
+
+		get_image_dd "$1" of="/dev/$diskdev" bs=4096 conv=fsync
+
+		# Separate removal and addtion is necessary; otherwise, partition 1
+		# will be missing if it overlaps with the old partition 2
+		partx -a - "/dev/$diskdev"
+
+		return 0
+	fi
+
+	#iterate over each partition from the image and write it to the boot disk
+	while read part start size; do
+		if export_partdevice partdev $part; then
+			v "Writing image to /dev/$partdev..."
+			if [ "$part" = "1" ]; then
+				platform_do_upgrade_efi_system_partition \
+					$1 $partdev $start $size || return 1
+			else
+				v "Normal partition, doing DD"
+				get_image_dd "$1" of="/dev/$partdev" ibs=512 obs=1M skip="$start" \
+					count="$size" conv=fsync
+			fi
+		else
+			v "Unable to find partition $part device, skipped."
+		fi
+	done < /tmp/partmap.image
+
+	local parttype=ext4
+
+	if (blkid > /dev/null) && export_partdevice partdev 1; then
+		part_magic_fat "/dev/$partdev" && parttype=vfat
+		mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
+		if export_partdevice partdev 2; then
+			THIS_PART_BLKID=$(blkid -o value -s PARTUUID "/dev/${partdev}")
+			v "Setting rootfs PARTUUID=${THIS_PART_BLKID}"
+			sed -i "s/\(PARTUUID=\)[a-f0-9-]\+/\1${THIS_PART_BLKID}/ig" \
+				/mnt/efi/openwrt/grub.cfg
+		fi
+		umount /mnt
+	fi
+	# Provide time for the storage medium to flush before system reset
+	# (despite the sync/umount it appears NVMe etc. do it in the background)
+	sleep 5
+}