Initial commit

target/linux/ath79/dts/qca9561_nec_wf1200cr.dts

@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "NEC Aterm WF1200CR";
+	compatible = "nec,wf1200cr", "qca,qca9561";
+
+	aliases {
+		led-boot = &led_power_green;
+		led-failsafe = &led_power_red;
+		led-running = &led_power_green;
+		led-upgrade = &led_power_green;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/* other LEDs are connected to ath10k (QCA9888) gpiochip */
+
+		led_power_green: power_green {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power_red: power_red {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		router {
+			label = "rt";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "devdata";
+				reg = <0x040000 0x010000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "devconf";
+				reg = <0x050000 0x010000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "misc";
+				reg = <0x060000 0x010000>;
+				read-only;
+			};
+
+			partition@70000 {
+				compatible = "seama";
+				label = "firmware";
+				reg = <0x070000 0x780000>;
+			};
+
+			partition@7f0000 {
+				label = "art";
+				reg = <0x7f0000 0x010000>;
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					precal_art_5000: pre-calibration@5000 {
+						reg = <0x5000 0x2f20>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	pll-data = <0x03000101 0x00000101 0x00001919>;
+
+	phy-handle = <&swphy0>;
+
+	gmac-config {
+		device = <&gmac>;
+
+		switch-phy-swap = <1>;
+		switch-phy-addr-swap = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_swled_enable_pins>;
+};
+
+&gpio {
+	switch_leds {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>,	/* WAN */
+			<19 GPIO_ACTIVE_HIGH>;	/* LAN */
+		output-high;
+		line-name = "led:wan-lan";
+	};
+};
+
+&pinmux {
+	pinmux_swled_enable_pins: swled_enable_pins {
+		pinctrl-single,bits =
+			<0xc 0x240000 0xff0000>,	/* WAN */
+			<0x10 0x10000000 0xff000000>;	/* LAN */
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&precal_art_5000>;
+		nvmem-cell-names = "pre-calibration";
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	qca,no-eeprom;
+};