Initial commit

target/linux/bcm47xx/base-files/etc/board.d/01_network

@@ -0,0 +1,212 @@
+# Copyright (C) 2006-2015 OpenWrt.org
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+configure_by_vlanports() {
+	local vlan0ports="$(nvram get vlan0ports)"
+	local vlan1ports="$(nvram get vlan1ports)"
+	local vlan2ports="$(nvram get vlan2ports)"
+	local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")"
+
+	if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+	   [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
+	   [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ];
+	then
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
+
+	elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
+	     [ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
+	     [ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ];
+	then
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0"
+
+	elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+		 [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
+		 [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
+	then
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+
+	elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
+	     [ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
+	     [ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ];
+	then
+		ucidef_add_switch "switch0" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+
+	else
+		logger -t "01_network" "Unable to determine network configuration"
+		ucidef_set_interface_lan "eth0"
+	fi
+}
+
+configure_by_boardnum() {
+	local boardnum="$1"
+
+	case "$boardnum" in
+	# WAP54G, Sitecom WL-105b
+	"2" | \
+	"1024")
+		ucidef_set_interface_lan "eth0"
+		;;
+
+	# Generic detection fallback
+	*)
+		configure_by_vlanports
+		;;
+	esac
+}
+
+configure_by_boardtype() {
+	local boardtype="$1"
+	local boardnum="$2"
+
+	case "$boardtype" in
+	"bcm94710r4")
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+
+	"0x0467")
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		;;
+
+	"0x042f" | \
+	"0x0472")
+		# WL-500gP
+		if [ "$boardnum" = "45" ]; then
+			ucidef_add_switch "switch0" \
+				"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+		# Generic BCM94704
+		else
+			ucidef_set_interface_wan "eth1"
+			ucidef_add_switch "switch0" \
+				"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+
+			# MAC addresses on 4704 tend to be screwed up. Add a workaround here
+			local mac="$(nvram get et0macaddr)"
+			local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+				  pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+				  pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
+
+			case "$mac" in
+			$pat)
+				ucidef_set_interface_macaddr "lan" "$mac"
+				ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)"
+				;;
+			esac
+		fi
+		;;
+
+	# Buffalo WBR-B11 and Buffalo WBR-G54
+	"bcm94710ap")
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+		;;
+
+	*)
+		configure_by_boardnum "$boardnum"
+		;;
+	esac
+}
+
+configure_by_model() {
+	local model="$1"
+	local boardtype="$2"
+	local boardnum="$3"
+
+	# Netgear WGT634U exception
+	if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		return
+	fi
+
+	case "$model" in
+	"Asus WLHDD" | \
+	"Asus WL300G")
+		ucidef_set_interface_lan "eth1"
+		;;
+
+	"Asus WL330GE")
+		ucidef_add_switch "switch0" "4:lan" "5t@eth0"
+		;;
+
+	"Asus WL500G" | \
+	"Microsoft MN-700")
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		;;
+
+	"Asus WL500GP V2")
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "5@eth0"
+		;;
+
+	"Asus RT-N12"* | \
+	"Buffalo WHR-G125" | \
+	"D-Link DIR-330" | \
+	"Motorola WR850G" | \
+	"Siemens SE505 V2")
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
+		;;
+
+	"Asus WL700")
+		ucidef_add_switch "switch0" \
+			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
+		;;
+
+	"Asus WL500W" | \
+	"Dell TrueMobile 2300")
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+		;;
+
+	"Asus RT-N16"* | \
+	"Linksys E3000 V1" | \
+	"Linksys WRT610N V2" | \
+	"Netgear WNR3500 V2" | \
+	"Netgear WNR3500L" | \
+	"Netgear WNR3500L V2")
+		ucidef_add_switch "switch0" \
+			"0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0"
+		;;
+
+	"Netgear R6200 V1")
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "8@eth0"
+		;;
+
+	"Netgear WN2500RP V1")
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"
+		;;
+
+	*)
+		configure_by_boardtype "$boardtype" "$boardnum"
+		;;
+	esac
+}
+
+
+model="$(cat /tmp/sysinfo/model)"
+boardtype="$(board_name)"
+
+case "$boardtype" in
+	*:*)
+		boardnum="${boardtype##*:}"
+		boardtype="${boardtype%:*}"
+	;;
+esac
+
+board_config_update
+
+configure_by_model "$model" "$boardtype" "$boardnum"
+
+board_config_flush

target/linux/bcm47xx/base-files/etc/diag.sh

@@ -0,0 +1,33 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+. /lib/functions/leds.sh
+
+get_status_led() {
+	for led in dmz power diag wps; do
+		status_led_file=$(find /sys/class/leds/ -name "*${led}*" | head -n1)
+		if [ ! -f $status_led_file ]; then
+			status_led=$(basename $status_led_file)
+			return
+		fi;
+	done
+}
+
+set_state() {
+	get_status_led
+
+	case "$1" in
+	preinit)
+		status_led_blink_preinit
+		;;
+	failsafe)
+		status_led_blink_failsafe
+		;;
+	preinit_regular)
+		status_led_blink_preinit_regular
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}

target/linux/bcm47xx/base-files/etc/init.d/wmacfixup

@@ -0,0 +1,33 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2010 OpenWrt.org
+
+START=41
+
+boot() {
+	[ -d /sys/class/ieee80211 ] || exit
+
+	commit=0
+
+	fixup_wmac() {
+		local cfg="$1"
+		local cfmac
+
+		config_get cfmac "$cfg" macaddr
+
+		[ "$cfmac" != "00:90:4c:5f:00:2a" ] || {
+			local nvmac="$(nvram get il0macaddr 2>/dev/null)"
+			[ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && {
+				uci set wireless.$cfg.macaddr="$nvmac"
+				commit=1
+			}
+		}
+	}
+
+	config_load wireless
+	config_foreach fixup_wmac wifi-device
+
+	[ "$commit" = 1 ] && uci commit wireless
+}
+
+start() { :; }
+stop()  { :; }

target/linux/bcm47xx/base-files/etc/uci-defaults/03_network_migration

@@ -0,0 +1,28 @@
+#
+# Copyright (C) 2014-2015 OpenWrt.org
+#
+
+uci show network | grep "\.vlan=0"
+[ $? -ne 0 ] && exit 0
+
+logger -t network "network config is invalid, creating new one"
+
+lan_proto="$(uci -q get network.lan.proto)"
+lan_ipaddr="$(uci -q get network.lan.ipaddr)"
+lan_netmask="$(uci -q get network.lan.netmask)"
+wan_proto="$(uci -q get network.wan.proto)"
+wan_ipaddr="$(uci -q get network.wan.ipaddr)"
+wan_netmask="$(uci -q get network.wan.netmask)"
+
+echo "" > /etc/config/network
+config_generate
+
+uci set network.lan.proto=$lan_proto
+uci set network.lan.ipaddr=$lan_ipaddr
+uci set network.lan.netmask=$lan_netmask
+uci set network.wan.proto=$wan_proto
+uci set network.wan.ipaddr=$wan_ipaddr
+uci set network.wan.netmask=$wan_netmask
+uci commit network
+
+exit 0

target/linux/bcm47xx/base-files/etc/uci-defaults/09_fix_crc

@@ -0,0 +1,5 @@
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+
+mtd fixtrx firmware

target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo

@@ -0,0 +1,14 @@
+do_sysinfo_bcm47xx() {
+	local boardtype="$(nvram get boardtype)"
+	local boardnum="$(nvram get boardnum)"
+	local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)"
+
+	[ -z "$model" ] && model="unknown"
+	[ -z "$boardtype" ] && boardtype="unknown"
+
+	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
+	echo "$boardtype${boardnum:+:$boardnum}" > /tmp/sysinfo/board_name
+	echo "$model" > /tmp/sysinfo/model
+}
+
+boot_hook_add preinit_main do_sysinfo_bcm47xx

target/linux/bcm47xx/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,248 @@
+PART_NAME=firmware
+
+LXL_FLAGS_VENDOR_LUXUL=0x00000001
+
+# $(1): file to read magic from
+# $(2): offset in bytes
+get_magic_long_at() {
+	dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
+}
+
+# $(1): file to read LE long number from
+# $(2): offset in bytes
+get_le_long_at() {
+	echo $((0x$(dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -e '1/4 "%02x"')))
+}
+
+platform_expected_image() {
+	local model="$(cat /tmp/sysinfo/model)"
+
+	case "$model" in
+		"Netgear R6200 V1")	echo "chk U12H192T00_NETGEAR"; return;;
+		"Netgear WGR614 V8")	echo "chk U12H072T00_NETGEAR"; return;;
+		"Netgear WGR614 V9")	echo "chk U12H094T00_NETGEAR"; return;;
+		"Netgear WGR614 V10")	echo "chk U12H139T01_NETGEAR"; return;;
+		"Netgear WN2500RP V1")	echo "chk U12H197T00_NETGEAR"; return;;
+		"Netgear WN2500RP V2")	echo "chk U12H294T00_NETGEAR"; return;;
+		"Netgear WNDR3300")	echo "chk U12H093T00_NETGEAR"; return;;
+		"Netgear WNDR3400 V1")	echo "chk U12H155T00_NETGEAR"; return;;
+		"Netgear WNDR3400 V2")	echo "chk U12H187T00_NETGEAR"; return;;
+		"Netgear WNDR3400 V3")	echo "chk U12H208T00_NETGEAR"; return;;
+		"Netgear WNDR3400 Vcna")	echo "chk U12H155T01_NETGEAR"; return;;
+		"Netgear WNDR3700 V3")	echo "chk U12H194T00_NETGEAR"; return;;
+		"Netgear WNDR4000")	echo "chk U12H181T00_NETGEAR"; return;;
+		"Netgear WNDR4500 V1")	echo "chk U12H189T00_NETGEAR"; return;;
+		"Netgear WNDR4500 V2")	echo "chk U12H224T00_NETGEAR"; return;;
+		"Netgear WNR2000 V2")	echo "chk U12H114T00_NETGEAR"; return;;
+		"Netgear WNR3500L")	echo "chk U12H136T99_NETGEAR"; return;;
+		"Netgear WNR3500U")	echo "chk U12H136T00_NETGEAR"; return;;
+		"Netgear WNR3500 V2")	echo "chk U12H127T00_NETGEAR"; return;;
+		"Netgear WNR3500 V2vc")	echo "chk U12H127T70_NETGEAR"; return;;
+		"Netgear WNR834B V2")	echo "chk U12H081T00_NETGEAR"; return;;
+		"Linksys E900 V1")	echo "cybertan E900"; return;;
+		"Linksys E1000 V1")	echo "cybertan E100"; return;;
+		"Linksys E1000 V2")	echo "cybertan E100"; return;;
+		"Linksys E1000 V2.1")	echo "cybertan E100"; return;;
+		"Linksys E1200 V2")	echo "cybertan E122"; return;;
+		"Linksys E2000 V1")	echo "cybertan 32XN"; return;;
+		"Linksys E3000 V1")	echo "cybertan 61XN"; return;;
+		"Linksys E3200 V1")	echo "cybertan 3200"; return;;
+		"Linksys E4200 V1")	echo "cybertan 4200"; return;;
+		"Linksys WRT150N V1.1")	echo "cybertan N150"; return;;
+		"Linksys WRT150N V1")	echo "cybertan N150"; return;;
+		"Linksys WRT160N V1")	echo "cybertan N150"; return;;
+		"Linksys WRT160N V3")	echo "cybertan N150"; return;;
+		"Linksys WRT300N V1")	echo "cybertan EWCB"; return;;
+		"Linksys WRT300N V1.1")	echo "cybertan EWC2"; return;;
+		"Linksys WRT310N V1")	echo "cybertan 310N"; return;;
+		"Linksys WRT310N V2")	echo "cybertan 310N"; return;;
+		"Linksys WRT610N V1")	echo "cybertan 610N"; return;;
+		"Linksys WRT610N V2")	echo "cybertan 610N"; return;;
+		"Luxul XAP-310 V1")	echo "lxl XAP-310"; return;;
+		"Luxul XAP-1210 V1")	echo "lxl XAP-1210"; return;;
+		"Luxul XAP-1230 V1")	echo "lxl XAP-1230"; return;;
+		"Luxul XAP-1240 V1")	echo "lxl XAP-1240"; return;;
+		"Luxul XAP-1500 V1")	echo "lxl XAP-1500"; return;;
+		"Luxul ABR-4400 V1")	echo "lxl ABR-4400"; return;;
+		"Luxul XBR-4400 V1")	echo "lxl XBR-4400"; return;;
+		"Luxul XVW-P30 V1")	echo "lxl XVW-P30"; return;;
+		"Luxul XWR-600 V1")	echo "lxl XWR-600"; return;;
+		"Luxul XWR-1750 V1")	echo "lxl XWR-1750"; return;;
+	esac
+}
+
+bcm47xx_identify() {
+	local magic
+
+	magic=$(get_magic_long "$1")
+	case "$magic" in
+		"48445230")
+			echo "trx"
+			return
+			;;
+		"2a23245e")
+			echo "chk"
+			return
+			;;
+		"4c584c23")
+			echo "lxl"
+			return
+			;;
+	esac
+
+	magic=$(get_magic_long_at "$1" 14)
+	[ "$magic" = "55324e44" ] && {
+		echo "cybertan"
+		return
+	}
+
+	magic=$(get_magic_long_at "$1" 60)
+	[ "$magic" = "4c584c23" ] && {
+		echo "lxlold"
+		return
+	}
+
+	echo "unknown"
+}
+
+platform_check_image() {
+	[ "$#" -gt 1 ] && return 1
+
+	local file_type=$(bcm47xx_identify "$1")
+	local magic
+	local error=0
+
+	case "$file_type" in
+		"chk")
+			local header_len=$((0x$(get_magic_long_at "$1" 4)))
+			local board_id_len=$(($header_len - 40))
+			local board_id=$(dd if="$1" skip=40 bs=1 count=$board_id_len 2>/dev/null | hexdump -v -e '1/1 "%c"')
+			local dev_board_id=$(platform_expected_image)
+			echo "Found CHK image with device board_id $board_id"
+
+			[ -n "$dev_board_id" -a "chk $board_id" != "$dev_board_id" ] && {
+				echo "Firmware board_id doesn't match device board_id ($dev_board_id)"
+				error=1
+			}
+
+			if ! otrx check "$1" -o "$header_len"; then
+				echo "No valid TRX firmware in the CHK image"
+				notify_firmware_test_result "trx_valid" 0
+				error=1
+			else
+				notify_firmware_test_result "trx_valid" 1
+			fi
+		;;
+		"cybertan")
+			local pattern=$(dd if="$1" bs=1 count=4 2>/dev/null | hexdump -v -e '1/1 "%c"')
+			local dev_pattern=$(platform_expected_image)
+			echo "Found CyberTAN image with device pattern: $pattern"
+
+			[ -n "$dev_pattern" -a "cybertan $pattern" != "$dev_pattern" ] && {
+				echo "Firmware pattern doesn't match device pattern ($dev_pattern)"
+				error=1
+			}
+
+			if ! otrx check "$1" -o 32; then
+				echo "No valid TRX firmware in the CyberTAN image"
+				notify_firmware_test_result "trx_valid" 0
+				error=1
+			else
+				notify_firmware_test_result "trx_valid" 1
+			fi
+		;;
+		"lxl")
+			local hdr_len=$(get_le_long_at "$1" 8)
+			local flags=$(get_le_long_at "$1" 12)
+			local board=$(dd if="$1" skip=16 bs=1 count=16 2>/dev/null | hexdump -v -e '1/1 "%c"')
+			local dev_board=$(platform_expected_image)
+			echo "Found Luxul image for board $board"
+
+			[ -n "$dev_board" -a "lxl $board" != "$dev_board" ] && {
+				echo "Firmware ($board) doesn't match device ($dev_board)"
+				error=1
+			}
+
+			[ $((flags & LXL_FLAGS_VENDOR_LUXUL)) -gt 0 ] && notify_firmware_no_backup
+
+			if ! otrx check "$1" -o "$hdr_len"; then
+				echo "No valid TRX firmware in the Luxul image"
+				notify_firmware_test_result "trx_valid" 0
+				error=1
+			else
+				notify_firmware_test_result "trx_valid" 1
+			fi
+		;;
+		"lxlold")
+			local board_id=$(dd if="$1" skip=48 bs=1 count=12 2>/dev/null | hexdump -v -e '1/1 "%c"')
+			local dev_board_id=$(platform_expected_image)
+			echo "Found Luxul image with device board_id $board_id"
+
+			[ -n "$dev_board_id" -a "lxl $board_id" != "$dev_board_id" ] && {
+				echo "Firmware board_id doesn't match device board_id ($dev_board_id)"
+				error=1
+			}
+
+			notify_firmware_no_backup
+
+			if ! otrx check "$1" -o 64; then
+				echo "No valid TRX firmware in the Luxul image"
+				notify_firmware_test_result "trx_valid" 0
+				error=1
+			else
+				notify_firmware_test_result "trx_valid" 1
+			fi
+		;;
+		"trx")
+			if ! otrx check "$1"; then
+				echo "Invalid (corrupted?) TRX firmware"
+				notify_firmware_test_result "trx_valid" 0
+				error=1
+			else
+				notify_firmware_test_result "trx_valid" 1
+			fi
+		;;
+		*)
+			echo "Invalid image type. Please use firmware specific for this device."
+			notify_firmware_broken
+			error=1
+		;;
+	esac
+
+	return $error
+}
+
+platform_trx_from_chk_cmd() {
+	local header_len=$((0x$(get_magic_long_at "$1" 4)))
+
+	echo -n dd bs=$header_len skip=1
+}
+
+platform_trx_from_cybertan_cmd() {
+	echo -n dd bs=32 skip=1
+}
+
+platform_trx_from_lxl_cmd() {
+	local hdr_len=$(get_le_long_at "$1" 8)
+
+	echo -n dd skip=$hdr_len iflag=skip_bytes
+}
+
+platform_trx_from_lxlold_cmd() {
+	echo -n dd bs=64 skip=1
+}
+
+platform_do_upgrade() {
+	local file_type=$(bcm47xx_identify "$1")
+	local trx="$1"
+	local cmd=""
+
+	case "$file_type" in
+		"chk")		cmd=$(platform_trx_from_chk_cmd "$trx");;
+		"cybertan")	cmd=$(platform_trx_from_cybertan_cmd "$trx");;
+		"lxl")		cmd=$(platform_trx_from_lxl_cmd "$trx");;
+		"lxlold")	cmd=$(platform_trx_from_lxlold_cmd "$trx");;
+	esac
+
+	default_do_upgrade "$trx" "$cmd"
+}