Initial commit

target/linux/gemini/base-files/etc/board.d/02_network

@@ -0,0 +1,41 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+dlink,dir-685)
+	# These are all connected to eth0 thru RTL8366RB
+	ucidef_set_interface "eth" device "eth0" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
+	;;
+dlink,dns-313|\
+edimax,ns-2502|\
+raidsonic,ib-4220-b|\
+wiliboard,wbd111|\
+wiliboard,wbd222)
+	# NAS machines with a single ethernet port
+	ucidef_set_interface_lan "eth0" "dhcp"
+	;;
+itian,sq201)
+	# These are all connected to eth1 thru VSC7395
+	ucidef_set_interface "eth" device "eth1" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
+	;;
+ssi,1328)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	;;
+storlink,gemini324)
+	# These are all connected to eth1 thru VSC7385
+	ucidef_set_interface "eth" device "eth1" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
+	;;
+teltonika,rut1xx)
+	# One ethernet LAN which is offering DHCP
+	ucidef_set_interface_lan "eth0"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/gemini/base-files/etc/board.d/03_hdparm

@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Spin down drives after one minute if inactive
+
+if [ ! -n "$(command -v hdparm)" ]; then
+	exit 0
+fi
+
+DISKS=$(find /dev/sd[a-z] 2>/dev/null)
+for DISK in $DISKS
+do
+	if [ -b $DISK ] ; then
+		hdparm -S 12 $DISK > /dev/null
+	fi
+done

target/linux/gemini/base-files/etc/board.d/03_splash

@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# OpenWRT splash screen if using framebuffer console
+
+if [ ! -d /sys/class/graphics/fbcon ] ; then
+	exit 0
+fi
+
+echo 0 > /sys/class/graphics/fbcon/cursor_blink
+cat /etc/banner > /dev/tty0

target/linux/gemini/base-files/etc/uci-defaults/09_fix-checksum

@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2019 OpenWrt.org
+#
+
+. /lib/functions.sh
+
+board=$(board_name)
+
+fixwrgg() {
+	local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
+
+	[ "$kernel_size" ] && mtd -c 0x$kernel_size fixwrgg firmware
+}
+
+case "$board" in
+dlink,dir-685)
+	fixwrgg
+	;;
+esac