Initial commit

target/linux/ipq40xx/base-files/etc/board.d/01_leds

@@ -0,0 +1,123 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+alfa-network,ap120c-ac)
+	ucidef_set_led_netdev "wan" "WAN" "amber:wan" "wan"
+	;;
+asus,rt-ac42u)
+	ucidef_set_led_netdev "lan1" "LAN1" "blue:lan-1" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN2" "blue:lan-2" "lan2"
+	ucidef_set_led_netdev "lan3" "LAN3" "blue:lan-3" "lan3"
+	ucidef_set_led_netdev "lan4" "LAN4" "blue:lan-4" "lan4"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "wan"
+	;;
+asus,rt-ac58u)
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "wan"
+	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "br-lan"
+	;;
+avm,fritzbox-4040)
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
+	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
+	;;
+avm,fritzbox-7530)
+	ucidef_set_led_netdev "dsl" "DSL" "green:info" "dsl0"
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
+	;;
+edgecore,oap100)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
+	;;
+engenius,eap1300)
+	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
+	ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
+	;;
+engenius,eap2200)
+	ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
+	;;
+engenius,ens620ext)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
+	;;
+glinet,gl-ap1300)
+	ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
+	;;
+glinet,gl-b1300 |\
+mikrotik,lhgg-60ad)
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
+	;;
+mikrotik,cap-ac)
+	ucidef_set_led_default "power" "POWER" "blue:power" "1"
+	ucidef_set_led_default "user" "USER" "green:user" "0"
+	ucidef_set_led_netdev "eth1" "ETH1" "green:eth1" "wan"
+	ucidef_set_led_netdev "eth2" "ETH2" "green:eth2" "lan"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+	;;
+mikrotik,hap-ac3)
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
+	ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
+	ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
+	ucidef_set_led_gpio "poe" "POE" "red:poe" "452" "0"
+	;;
+mikrotik,hap-ac3-lte6-kit)
+        ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
+        ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
+        ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
+        ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
+        ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
+        ;;
+
+mikrotik,sxtsq-5-ac)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
+	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
+	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
+	;;
+mobipromo,cm520-79f)
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "wan"
+	ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "lan2"
+	;;
+netgear,ex6100v2 |\
+netgear,ex6150v2)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
+	;;
+qxwlan,e2600ac-c1 |\
+qxwlan,e2600ac-c2)
+	ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
+	;;
+sony,ncp-hg100-cellular)
+	ucidef_set_led_netdev "lan" "LAN" "green:lan" "lan"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
+	ucidef_set_led_netdev "wwan" "WWAN" "green:wan-4" "wwan0"
+	;;
+zyxel,nbg6617 |\
+zyxel,wre6606)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/ipq40xx/base-files/etc/board.d/02_network

@@ -0,0 +1,253 @@
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq40xx_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	8dev,habanero-dvk|\
+	avm,fritzbox-4040|\
+	asus,rt-ac42u|\
+	asus,rt-ac58u|\
+	linksys,ea6350v3|\
+	linksys,ea8300|\
+	linksys,mr8300|\
+	mikrotik,hap-ac2|\
+	mikrotik,hap-ac3|\
+	mikrotik,hap-ac3-lte6-kit|\
+	p2w,r619ac-64m|\
+	p2w,r619ac-128m|\
+	pakedge,wr-1|\
+	teltonika,rutx50|\
+	yyets,le1|\
+	zyxel,nbg6617)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	8dev,jalapeno|\
+	alfa-network,ap120c-ac|\
+	asus,map-ac2200|\
+	cilab,meshpoint-one|\
+	edgecore,ecw5211|\
+	glinet,gl-ap1300|\
+	glinet,gl-b2200|\
+	google,wifi|\
+	linksys,whw03|\
+	linksys,whw03v2|\
+	luma,wrtq-329acn|\
+	mikrotik,cap-ac|\
+	netgear,wac510|\
+	sony,ncp-hg100-cellular|\
+	wallys,dr40x9|\
+	zte,mf18a|\
+	zte,mf289f)
+		ucidef_set_interfaces_lan_wan "lan" "wan"
+		;;
+	aruba,ap-303|\
+	aruba,ap-365|\
+	avm,fritzrepeater-1200|\
+	dlink,dap-2610|\
+	engenius,eap1300|\
+	extreme-networks,ws-ap3915i|\
+	meraki,mr33|\
+	meraki,mr74|\
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac|\
+	netgear,ex6100v2|\
+	netgear,ex6150v2|\
+	zte,mf282plus)
+		ucidef_set_interface_lan "lan"
+		;;
+	avm,fritzbox-7530)
+		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+		;;
+	avm,fritzrepeater-3000|\
+	cellc,rtl30vw)
+		ucidef_set_interface_lan "lan1 lan2"
+		;;
+	compex,wpj428)
+		ucidef_set_interface_lan "lan1 lan2"
+		;;
+	devolo,magic-2-wifi-next)
+		ucidef_set_interface_lan "lan1 lan2 ghn"
+		;;
+	extreme-networks,ws-ap391x)
+		ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2 sw-eth3 sw-eth5" "sw-eth4"
+		;;
+	linksys,whw01)
+		ucidef_set_interface_lan "eth1 eth2"
+		;;
+	glinet,gl-a1300|\
+	glinet,gl-b1300|\
+	mobipromo,cm520-79f)
+		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
+		;;
+	mikrotik,wap-ac|\
+	mikrotik,wap-ac-lte|\
+	mikrotik,wap-r-ac)
+		ucidef_set_interface_lan "sw-eth1 sw-eth2"
+		;;
+	aruba,ap-303h|\
+	buffalo,wtr-m2133hp|\
+	ezviz,cs-w3-wd1200g-eup|\
+	netgear,rbr40|\
+	netgear,rbs40|\
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		;;
+	openmesh,a42|\
+	openmesh,a62)
+		ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
+		;;
+	plasmacloud,pa1200|\
+	plasmacloud,pa2200)
+		ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2"
+		;;
+	qxwlan,e2600ac-c1)
+		ucidef_set_interfaces_lan_wan "sw-eth1" "sw-eth2"
+		;;
+	qxwlan,e2600ac-c2)
+		ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2" "sw-eth3"
+		;;
+	zte,mf286d)
+		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
+		;;
+	zte,mf287|\
+	zte,mf287plus|\
+	zte,mf287pro)
+		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+		ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
+		;;
+	netgear,lbr20)
+		ucidef_set_interface_lan "lan1 lan2"
+		ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
+		;;
+	*)
+		echo "Unsupported hardware. Network interfaces not initialized"
+		;;
+	esac
+}
+
+ipq40xx_setup_dsl()
+{
+	local board="$1"
+	local annex="j"
+	local tone="b"
+	local xfer_mode=""
+
+	case "$board" in
+	avm,fritzbox-7530)
+		;;
+	*)
+		return 0
+		;;
+	esac
+
+	ucidef_add_atm_bridge "1" "32" "llc" "bridged" "dsl"
+	ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
+	ucidef_set_interface_wan "dsl0" "pppoe"
+}
+
+ipq40xx_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case "$board" in
+	8dev,habanero-dvk)
+		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
+		;;
+	asus,rt-ac42u)
+		label_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		;;
+	avm,fritzbox-7530)
+		local tffsdev=$(find_mtd_chardev "nand-tffs")
+		wan_mac=$(/usr/bin/fritz_tffs_nand -b -d $tffsdev -n macdsl)
+		;;
+	cilab,meshpoint-one)
+		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
+		;;
+	devolo,magic-2-wifi-next)
+		lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
+		label_mac=$lan_mac
+		;;
+	dlink,dap-2610)
+		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
+		label_mac=$lan_mac
+		;;
+	engenius,eap2200|\
+	engenius,emd1)
+		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		label_mac=$lan_mac
+		;;
+	engenius,emr3500)
+		wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
+		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		label_mac=$wan_mac
+		;;
+	engenius,ens620ext)
+		wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	ezviz,cs-w3-wd1200g-eup)
+		label_mac=$(mtd_get_mac_binary "ART" 0x6)
+		;;
+	google,wifi)
+		wan_mac=$(get_mac_label)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	linksys,ea6350v3|\
+	linksys,ea8300  |\
+	linksys,mr8300)
+		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	linksys,whw03)
+		wan_mac=$(mmc_get_mac_ascii devinfo hw_mac_addr)
+		lan_mac="$wan_mac"
+		;;
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2|\
+	mikrotik,hap-ac3|\
+	mikrotik,hap-ac3-lte6-kit)
+		wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		lan_mac=$(macaddr_add $wan_mac 1)
+		label_mac="$wan_mac"
+		;;
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac)
+		lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		label_mac="$lan_mac"
+		;;
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60|\
+	pakedge,wr-1)
+		wan_mac=$(macaddr_add $(get_mac_label) 1)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ipq40xx_setup_interfaces $board
+ipq40xx_setup_dsl $board
+ipq40xx_setup_macs $board
+board_config_flush
+
+exit 0

target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches

@@ -0,0 +1,48 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+cellc,rtl30vw)
+	ucidef_add_gpio_switch "w_disable" "W_DISABLE mPCIE pin" "398" "1"
+	ucidef_add_gpio_switch "pmd_resin_n" "PMD_RESIN_N pin" "399" "1"
+	ucidef_add_gpio_switch "mcpie_vcc" "LTE power" "400" "0"
+	ucidef_add_gpio_switch "usb_vcc" "USB power" "401" "0"
+	;;
+cilab,meshpoint-one)
+	ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "513" "1"
+	;;
+compex,wpj428)
+	ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
+	;;
+mikrotik,cap-ac)
+	ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "514" "0"
+	;;
+mikrotik,hap-ac3)
+	ucidef_add_gpio_switch "poe_passtrough" "PoE Passthrough" "552" "0"
+	;;
+mikrotik,hap-ac3-lte6-kit)
+	ucidef_add_gpio_switch "lte_ant_sw1" "LTE Antenna SW 1" "557" "0"
+	ucidef_add_gpio_switch "lte_ant_sw2" "LTE Antenna SW 2" "558" "0"
+	ucidef_add_gpio_switch "lte_reset" "LTE reset" "561" "0"
+	;;
+sony,ncp-hg100-cellular)
+	ucidef_add_gpio_switch "uart_dbgcon_en" "debug console enable" "527" "1"
+	;;
+wallys,dr40x9)
+	ucidef_add_gpio_switch "sim_card_select" "SIM card select" "523" "0"
+	;;
+zte,mf282plus|\
+zte,mf286d|\
+zte,mf287pro|\
+zte,mf289f)
+	ucidef_add_gpio_switch "power_btn_block" "Power button blocker" "521" "0"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/ipq40xx/base-files/etc/board.d/05_compat-version

@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2022 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	*)
+		ucidef_set_compat_version "1.1"
+		;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -0,0 +1,292 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:01:00.0.bin")
+	case "$board" in
+	meraki,mr33 |\
+	meraki,mr74)
+		caldata_extract_ubi "ART" 0x9000 0x844
+		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
+		;;
+	esac
+	;;
+"ath10k/pre-cal-pci-0000:01:00.0.bin")
+	case "$board" in
+	asus,map-ac2200)
+		caldata_extract_ubi "Factory" 0x9000 0x2f20
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	asus,rt-ac42u)
+		caldata_extract_ubi "Factory" 0x9000 0x2f20
+		;;
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x9000 0x2f20
+		# OEM assigns 4 sequential MACs
+		ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+		;;
+	linksys,whw03)
+		caldata_extract_mmc "0:ART" 0x9000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+		;;
+	netgear,rbr40|\
+	netgear,rbs40|\
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		caldata_extract_mmc "0:ART" 0x9000 0x2f20
+		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
+		;;
+	esac
+	;;
+"ath10k/pre-cal-ahb-a000000.wifi.bin")
+	case "$board" in
+	asus,map-ac2200|\
+	asus,rt-ac42u)
+		caldata_extract_ubi "Factory" 0x1000 0x2f20
+		;;
+	avm,fritzbox-4040)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+		;;
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	cellc,rtl30vw)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		;;
+	devolo,magic-2-wifi-next)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
+		;;
+	dlink,dap-2610)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
+		;;
+	engenius,emd1)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
+		;;
+	engenius,emr3500)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		;;
+	engenius,ens620ext)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
+		;;
+	extreme-networks,ws-ap3915i |\
+	extreme-networks,ws-ap391x)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+		;;
+	linksys,whw03)
+		caldata_extract_mmc "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+		;;
+	meraki,mr33 |\
+	meraki,mr74)
+		caldata_extract_ubi "ART" 0x1000 0x2f20
+		caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
+		;;
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,wap-ac |\
+	mikrotik,wap-ac-lte |\
+	mikrotik,wap-r-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+		;;
+	netgear,rbr40|\
+	netgear,rbs40|\
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		caldata_extract_mmc "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
+		;;
+	pakedge,wr-1)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
+		;;
+	teltonika,rutx10|\
+	teltonika,rutx50)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
+		;;
+	sony,ncp-hg100-cellular)
+		caldata_extract_mmc "0:ART" 0x1000 0x2f20
+		;;
+	zyxel,nbg6617 |\
+	zyxel,wre6606)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+		;;
+	esac
+	;;
+"ath10k/pre-cal-ahb-a800000.wifi.bin")
+	case "$board" in
+	asus,map-ac2200)
+		caldata_extract_ubi "Factory" 0x5000 0x2f20
+		;;
+	avm,fritzbox-4040)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+		;;
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	cellc,rtl30vw)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		;;
+	devolo,magic-2-wifi-next)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
+		;;
+	dlink,dap-2610)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+		;;
+	engenius,emd1)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
+		;;
+	engenius,emr3500)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
+		;;
+	engenius,ens620ext)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
+		;;
+	extreme-networks,ws-ap3915i |\
+	extreme-networks,ws-ap391x)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+		;;
+	linksys,whw03)
+		caldata_extract_mmc "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+		;;
+	meraki,mr33 |\
+	meraki,mr74)
+		caldata_extract_ubi "ART" 0x5000 0x2f20
+		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
+		;;
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,sxtsq-5-ac |\
+	mikrotik,wap-ac |\
+	mikrotik,wap-ac-lte |\
+	mikrotik,wap-r-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+		;;
+	netgear,rbr40|\
+	netgear,rbs40|\
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		caldata_extract_mmc "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
+		;;
+	pakedge,wr-1)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
+		;;
+	teltonika,rutx10|\
+	teltonika,rutx50)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
+		;;
+	sony,ncp-hg100-cellular)
+		caldata_extract_mmc "0:ART" 0x5000 0x2f20
+		;;
+	zyxel,nbg6617 |\
+	zyxel,wre6606)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+		;;
+	esac
+	;;
+"ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
+	case "$board" in
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,wap-ac |\
+	mikrotik,wap-ac-lte |\
+	mikrotik,wap-r-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
+		;;
+	esac
+	;;
+"ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
+	case "$board" in
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+        mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,sxtsq-5-ac |\
+	mikrotik,wap-ac |\
+	mikrotik,wap-ac-lte |\
+	mikrotik,wap-r-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac

target/linux/ipq40xx/base-files/etc/init.d/bootcount

@@ -0,0 +1,54 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+mmc_resetbc() {
+	local part_label="$1"
+
+	. /lib/functions.sh
+
+	local part_device="$(find_mmc_part "$part_label")"
+	if [ "$part_device" = "" ]; then
+		>&2 echo "mmc_resetbc: Unknown partition label: $part_label"
+		return 1
+	fi
+
+	local magic_number="$(hexdump -e '"0x%02x\n"' -n 4 "$part_device")"
+	if [ "$magic_number" != "0x20110811" ]; then
+		>&2 echo "mmc_resetbc: Unexpected partition magic: $magic_number"
+		return 1
+	fi
+
+	local last_count=$(hexdump -e '"0x%02x\n"' -n 4 -s 4 "$part_device")
+	if [ "$last_count" != "0x00" ]; then
+		printf "\x00" | dd of="$part_device" bs=4 seek=1 count=1 conv=notrunc 2>/dev/null
+
+		last_count=$(hexdump -e '"0x%02x\n"' -n 4 -s 4 "$part_device")
+		if [ "$last_count" != "0x00" ]; then
+			>&2 echo "mmc_resetbc: Unable to reset boot counter"
+			return 1
+		fi
+	fi
+}
+
+boot() {
+	case $(board_name) in
+	alfa-network,ap120c-ac)
+		[ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
+			echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
+		;;
+	linksys,ea6350v3|\
+	linksys,ea8300|\
+	linksys,mr8300|\
+	linksys,whw01|\
+	linksys,whw03v2)
+		mtd resetbc s_env || true
+		;;
+	linksys,whw03)
+		mmc_resetbc s_env || true
+		;;
+	netgear,wac510)
+		fw_setenv boot_cnt=0
+		;;
+	esac
+}

target/linux/ipq40xx/base-files/etc/init.d/modem_switch

@@ -0,0 +1,34 @@
+#!/bin/sh /etc/rc.common
+
+START=15
+STOP=10
+
+boot() {
+	case $(board_name) in
+		netgear,lbr20)
+			echo "0" > /sys/class/gpio/lte_rst/value
+			echo "0" > /sys/class/gpio/lte_pwrkey/value
+			echo "0" > /sys/class/gpio/lte_usb_boot/value
+			echo "0" > /sys/class/gpio/lte_pwm/value
+			sleep 1
+			echo "1" > /sys/class/gpio/lte_pwm/value
+			echo "1" > /sys/class/gpio/lte_pwrkey/value
+			echo "1" > /sys/class/gpio/lte_rst/value
+			sleep 1
+			echo "0" > /sys/class/gpio/lte_pwrkey/value
+			sleep 1
+			echo "1" > /sys/class/gpio/lte_pwrkey/value
+		;;
+	esac
+}
+
+shutdown() {
+	case $(board_name) in
+		netgear,lbr20)
+			echo "0" > /sys/class/gpio/lte_pwrkey/value
+			sleep 1
+			echo "1" > /sys/class/gpio/lte_pwrkey/value
+			sleep 10
+		;;
+	esac
+}

target/linux/ipq40xx/base-files/etc/inittab

@@ -0,0 +1,5 @@
+# Copyright (c) 2013 The Linux Foundation. All rights reserved.
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyMSM0::askfirst:/usr/libexec/login.sh
+ttyMSM1::askfirst:/usr/libexec/login.sh

target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration

@@ -0,0 +1,28 @@
+. /lib/functions/migrations.sh
+
+board=$(board_name)
+
+case "$board" in
+asus,map-ac2200)
+	migrate_leds ':chan=-'
+	;;
+asus,rt-ac58u)
+	migrate_leds ":status=:power" ":wlan2G=:wlan-2" ":wlan5G=:wlan-5"
+	;;
+engenius,emr3500)
+	migrate_leds "emr3500:="
+	;;
+engenius,ens620ext|\
+zyxel,nbg6617)
+	migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g"
+	;;
+netgear,wac510)
+	migrate_leds ":wlan2g=:wlan-0" ":wlan5g=:wlan-1" ":act=:activity"
+	;;
+esac
+
+remove_devicename_leds
+
+migrations_apply system
+
+exit 0

target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version

@@ -0,0 +1,13 @@
+. /lib/functions.sh
+
+case "$(board_name)" in
+linksys,ea6350v3|\
+linksys,ea8300|\
+linksys,mr8300|\
+ezviz,cs-w3-wd1200g-eup)
+	uci set system.@system[0].compat_version="2.0"
+	uci commit system
+	;;
+esac
+
+exit 0

target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh

@@ -0,0 +1,54 @@
+. /lib/functions.sh
+
+preinit_set_mac_address() {
+	case $(board_name) in
+	asus,map-ac2200)
+		base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		ip link set dev eth0 address $(macaddr_add "$base_mac" 1)
+		ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
+		;;
+	asus,rt-ac42u)
+		base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		ip link set dev eth0 address $base_mac
+		ip link set dev lan1 address $base_mac
+		ip link set dev lan2 address $base_mac
+		ip link set dev lan3 address $base_mac
+		ip link set dev lan4 address $base_mac
+		ip link set dev wan address $(mtd_get_mac_binary_ubi Factory 0x9006)
+		;;
+	engenius,eap2200)
+		base_mac=$(cat /sys/class/net/eth0/address)
+		ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
+		;;
+	extreme-networks,ws-ap3915i|\
+	extreme-networks,ws-ap391x)
+		ip link set dev eth0 address $(mtd_get_mac_ascii CFG1 ethaddr)
+		;;
+	linksys,ea8300|\
+	linksys,mr8300)
+		base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
+		ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
+		;;
+	linksys,whw03)
+		base_mac=$(mmc_get_mac_ascii devinfo hw_mac_addr)
+		ip link set dev eth0 address "$base_mac"
+		ip link set dev lan address "$base_mac"
+		ip link set dev wan address "$base_mac"
+		;;
+	mikrotik,wap-ac|\
+	mikrotik,wap-ac-lte|\
+	mikrotik,wap-r-ac)
+		base_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		ip link set dev sw-eth1 address "$base_mac"
+		ip link set dev sw-eth2 address $(macaddr_add "$base_mac" 1)
+		;;
+	zyxel,nbg6617)
+		base_mac=$(cat /sys/class/net/eth0/address)
+		ip link set dev eth0 address $(macaddr_add "$base_mac" 2)
+		ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
+		;;
+	esac
+}
+
+boot_hook_add preinit_main preinit_set_mac_address

target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh

@@ -0,0 +1,108 @@
+# The U-Boot loader with the datachk patchset for dualbooting requires image
+# sizes and checksums to be provided in the U-Boot environment.
+# The devices come with 2 main partitions - while one is active
+# sysupgrade will flash the other. The boot order is changed to boot the
+# newly flashed partition. If the new partition can't be booted due to
+# upgrade failures the previously used partition is loaded.
+
+platform_do_upgrade_dualboot_datachk() {
+	local tar_file="$1"
+	local restore_backup
+	local primary_kernel_mtd
+
+	local setenv_script="/tmp/fw_env_upgrade"
+
+	local kernel_mtd="$(find_mtd_index $PART_NAME)"
+	local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
+	local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
+
+	# detect to which flash region the new image is written to.
+	#
+	# 1. check what is the mtd index for the first flash region on this
+	#    device
+	# 2. check if the target partition ("inactive") has the mtd index of
+	#    the first flash region
+	#
+	#    - when it is: the new bootseq will be 1,2 and the first region is
+	#      modified
+	#    - when it isnt: bootseq will be 2,1 and the second region is
+	#      modified
+	#
+	# The detection has to be done via the hardcoded mtd partition because
+	# the current boot might be done with the fallback region. Let us
+	# assume that the current bootseq is 1,2. The bootloader detected that
+	# the image in flash region 1 is corrupt and thus switches to flash
+	# region 2. The bootseq in the u-boot-env is now still the same and
+	# the sysupgrade code can now only rely on the actual mtd indexes and
+	# not the bootseq variable to detect the currently booted flash
+	# region/image.
+	#
+	# In the above example, an implementation which uses bootseq ("1,2") to
+	# detect the currently booted image would assume that region 1 is booted
+	# and then overwrite the variables for the wrong flash region (aka the
+	# one which isn't modified). This could result in a device which doesn't
+	# boot anymore to Linux until it was reflashed with ap51-flash.
+	local next_boot_part="1"
+	case "$(board_name)" in
+	plasmacloud,pa1200|\
+	openmesh,a42)
+		primary_kernel_mtd=8
+		;;
+	plasmacloud,pa2200|\
+	openmesh,a62)
+		primary_kernel_mtd=10
+		;;
+	*)
+		echo "failed to detect primary kernel mtd partition for board"
+		return 1
+		;;
+	esac
+	[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
+	local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+	# rootfs without EOF marker
+	rootfs_length=$((rootfs_length-4))
+
+	local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
+	# md5 checksum of rootfs with EOF marker
+	local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
+
+	#
+	# add tar support to get_image() to use default_do_upgrade() instead?
+	#
+
+	# take care of restoring a saved config
+	[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
+
+	mtd -q erase inactive
+	tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
+	tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
+
+	# prepare new u-boot env
+	if [ "$next_boot_part" = "1" ]; then
+		echo "bootseq 1,2" > $setenv_script
+	else
+		echo "bootseq 2,1" > $setenv_script
+	fi
+
+	printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
+	printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
+	printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
+	printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
+
+	printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
+	printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
+	printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
+	printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
+
+	# store u-boot env changes
+	mkdir -p /var/lock
+	fw_setenv -s $setenv_script || {
+		echo "failed to update U-Boot environment"
+		return 1
+	}
+}

target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh

@@ -0,0 +1,193 @@
+linksys_get_target_firmware() {
+	local cur_boot_part mtd_ubi0
+
+	cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
+	if [ -z "${cur_boot_part}" ]; then
+		mtd_ubi0=$(cat /sys/class/ubi/ubi0/mtd_num)
+		case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
+		kernel|rootfs)
+			cur_boot_part=1
+			;;
+		alt_kernel|alt_rootfs)
+			cur_boot_part=2
+			;;
+		esac
+		>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+			"${cur_boot_part}" "${mtd_ubi0}"
+	fi
+
+	# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
+	#  if test $auto_recovery = no;
+	#      then bootipq;
+	#  elif test $boot_part = 1;
+	#      then run bootpart1;
+	#      else run bootpart2;
+	#  fi
+
+	case "$cur_boot_part" in
+	1)
+		fw_setenv -s - <<-EOF
+			boot_part 2
+			auto_recovery yes
+		EOF
+		printf "alt_kernel"
+		return
+		;;
+	2)
+		fw_setenv -s - <<-EOF
+			boot_part 1
+			auto_recovery yes
+		EOF
+		printf "kernel"
+		return
+		;;
+	*)
+		return
+		;;
+	esac
+}
+
+linksys_is_factory_image() {
+	local board=$(board_name)
+	board=${board##*,}
+
+	# check matching footer signature
+	tail -c 256 $1 | grep -q -i "\.LINKSYS\.........${board}"
+}
+
+platform_do_upgrade_linksys() {
+	local magic_long="$(get_magic_long "$1")"
+
+	local rm_oem_fw_vols="squashfs ubifs"	# from OEM [alt_]rootfs UBI
+	local vol
+
+	mkdir -p /var/lock
+	local part_label="$(linksys_get_target_firmware)"
+	touch /var/lock/fw_printenv.lock
+
+	if [ -z "$part_label" ]; then
+		echo "cannot find target partition"
+		exit 1
+	fi
+
+	local target_mtd=$(find_mtd_part "$part_label")
+
+	[ "$magic_long" = "73797375" ] && {
+		CI_KERNPART="$part_label"
+		if [ "$part_label" = "kernel" ]; then
+			CI_UBIPART="rootfs"
+		else
+			CI_UBIPART="alt_rootfs"
+		fi
+
+		local mtdnum="$(find_mtd_index "$CI_UBIPART")"
+		if [ ! "$mtdnum" ]; then
+			echo "cannot find ubi mtd partition $CI_UBIPART"
+			return 1
+		fi
+
+		local ubidev="$(nand_find_ubi "$CI_UBIPART")"
+		if [ ! "$ubidev" ]; then
+			ubiattach -m "$mtdnum"
+			sync
+			ubidev="$(nand_find_ubi "$CI_UBIPART")"
+		fi
+
+		if [ "$ubidev" ]; then
+			for vol in $rm_oem_fw_vols; do
+				ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
+			done
+		fi
+
+		# complete std upgrade
+		if nand_upgrade_tar "$1" ; then
+			nand_do_upgrade_success
+		else
+			nand_do_upgrade_failed
+		fi
+
+	}
+
+	[ "$magic_long" = "27051956" ] && {
+		echo "writing \"$1\" image to \"$part_label\""
+		get_image "$1" | mtd write - "$part_label"
+	}
+
+	[ "$magic_long" = "d00dfeed" ] && {
+		if ! linksys_is_factory_image "$1"; then
+			echo "factory image doesn't match device"
+			return 1
+		fi
+
+		echo "writing \"$1\" factory image to \"$part_label\""
+		get_image "$1" | mtd -e "$part_label" write - "$part_label"
+	}
+}
+
+linksys_get_cmdline_rootfs_device() {
+	if read cmdline < /proc/cmdline; then
+		case "$cmdline" in
+		*root=*)
+			local str="${cmdline##*root=}"
+			echo "${str%% *}"
+			return
+			;;
+		esac
+	fi
+	return 1
+}
+
+linksys_get_current_boot_part_emmc() {
+	local boot_part="$(fw_printenv -n boot_part)"
+	if [ "$boot_part" = 1 ] || [ "$boot_part" = 2 ]; then
+		v "Current boot_part=$boot_part selected from bootloader environment"
+	else
+		local rootfs_device="$(linksys_get_cmdline_rootfs_device)"
+		if [ "$rootfs_device" = "$(find_mmc_part "rootfs")" ]; then
+			boot_part=1
+		elif [ "$rootfs_device" = "$(find_mmc_part "alt_rootfs")" ]; then
+			boot_part=2
+		else
+			v "Could not determine current boot_part"
+			return 1
+		fi
+		v "Current boot_part=$boot_part selected from cmdline rootfs=$rootfs_device"
+	fi
+	echo $boot_part
+}
+
+linksys_set_target_partitions_emmc() {
+	local current_boot_part="$1"
+
+	if [ "$current_boot_part" = 1 ]; then
+		CI_KERNPART="alt_kernel"
+		CI_ROOTPART="alt_rootfs"
+		fw_setenv -s - <<-EOF
+			boot_part 2
+			auto_recovery yes
+		EOF
+	elif [ "$current_boot_part" = 2 ]; then
+		CI_KERNPART="kernel"
+		CI_ROOTPART="rootfs"
+		fw_setenv -s - <<-EOF
+			boot_part 1
+			auto_recovery yes
+		EOF
+	else
+		v "Could not set target eMMC partitions"
+		return 1
+	fi
+
+	v "Target eMMC partitions: $CI_KERNPART, $CI_ROOTPART"
+}
+
+platform_do_upgrade_linksys_emmc() {
+	local file="$1"
+
+	mkdir -p /var/lock
+	local current_boot_part="$(linksys_get_current_boot_part_emmc)"
+	linksys_set_target_partitions_emmc "$current_boot_part" || exit 1
+	touch /var/lock/fw_printenv.lock
+
+	emmc_do_upgrade "$file"
+}

target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only
+. /lib/functions.sh
+
+platform_do_upgrade_netgear_orbi_upgrade() {
+	command -v losetup >/dev/null || {
+		logger -s "Upgrade failed: 'losetup' not installed."
+		return 1
+	}
+
+	local tar_file=$1
+	local kernel=$2
+	local rootfs=$3
+
+	[ -z "$kernel" ] && kernel=$(find_mmc_part "kernel")
+	[ -z "$rootfs" ] && rootfs=$(find_mmc_part "rootfs")
+
+	[ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
+	[ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
+
+	netgear_orbi_do_flash $tar_file $kernel $rootfs
+
+	echo "sysupgrade successful"
+	umount -a
+	reboot -f
+}
+
+netgear_orbi_do_flash() {
+	local tar_file=$1
+	local kernel=$2
+	local rootfs=$3
+
+	# keep sure its unbound
+	losetup --detach-all || {
+		echo "Failed to detach all loop devices. Skip this try."
+		reboot -f
+	}
+
+	# use the first found directory in the tar archive
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	echo "flashing kernel to $kernel"
+	tar xf $tar_file ${board_dir}/kernel -O >$kernel
+
+	echo "flashing rootfs to ${rootfs}"
+	tar xf $tar_file ${board_dir}/root -O >"${rootfs}"
+
+	# a padded rootfs is needed for overlay fs creation
+	local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+	[ $offset -lt 65536 ] && {
+		echo "Wrong size for rootfs: $offset"
+		sleep 10
+		reboot -f
+	}
+
+	# Mount loop for rootfs_data
+	local loopdev="$(losetup -f)"
+	losetup -o $offset $loopdev $rootfs || {
+		echo "Failed to mount looped rootfs_data."
+		sleep 10
+		reboot -f
+	}
+
+	echo "Format new rootfs_data at position ${offset}."
+	mkfs.ext4 -F -L rootfs_data $loopdev
+	mkdir /tmp/new_root
+	mount -t ext4 $loopdev /tmp/new_root && {
+		echo "Saving config to rootfs_data at position ${offset}."
+		cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
+		umount /tmp/new_root
+	}
+
+	# Cleanup
+	losetup -d $loopdev >/dev/null 2>&1
+	sync
+}

target/linux/ipq40xx/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,248 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+platform_check_image() {
+	case "$(board_name)" in
+	asus,rt-ac42u |\
+	asus,rt-ac58u)
+		local ubidev=$(nand_find_ubi $CI_UBIPART)
+		local asus_root=$(nand_find_volume $ubidev jffs2)
+
+		[ -n "$asus_root" ] || return 0
+
+		cat << EOF
+jffs2 partition is still present.
+There's probably no space left
+to install the filesystem.
+
+You need to delete the jffs2 partition first:
+# ubirmvol /dev/ubi0 --name=jffs2
+
+Once this is done. Retry.
+EOF
+		return 1
+		;;
+	zte,mf18a |\
+	zte,mf282plus|\
+	zte,mf286d |\
+	zte,mf287|\
+	zte,mf287plus |\
+	zte,mf287pro |\
+	zte,mf289f)
+		CI_UBIPART="rootfs"
+		local mtdnum="$( find_mtd_index $CI_UBIPART )"
+		[ ! "$mtdnum" ] && return 1
+		ubiattach -m "$mtdnum" || true
+		local ubidev="$( nand_find_ubi $CI_UBIPART )"
+		local ubi_rootfs=$(nand_find_volume $ubidev ubi_rootfs)
+		local ubi_rootfs_data=$(nand_find_volume $ubidev ubi_rootfs_data)
+
+		[ -n "$ubi_rootfs" ] || [ -n "$ubi_rootfs_data" ] || return 0
+
+		cat << EOF
+ubi_rootfs partition is still present.
+
+You need to delete the stock partition first:
+# ubirmvol /dev/ubi0 -N ubi_rootfs
+Please also delete ubi_rootfs_data, if exist:
+# ubirmvol /dev/ubi0 -N ubi_rootfs_data
+
+Once this is done. Retry.
+EOF
+		return 1
+		;;
+	esac
+	return 0;
+}
+
+askey_do_upgrade() {
+	local tar_file="$1"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+
+	nand_do_upgrade "$1"
+}
+
+zyxel_do_upgrade() {
+	local tar_file="$1"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
+
+	if [ -n "$UPGRADE_BACKUP" ]; then
+		tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
+	else
+		tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+	fi
+}
+
+platform_do_upgrade_mikrotik_nand() {
+	local fw_mtd=$(find_mtd_part kernel)
+	fw_mtd="${fw_mtd/block/}"
+	[ -n "$fw_mtd" ] || return
+
+	local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+	[ -n "$board_dir" ] || return
+
+	local kernel_len=$(tar xf "$1" ${board_dir}/kernel -O | wc -c)
+	[ -n "$kernel_len" ] || return
+
+	tar xf "$1" ${board_dir}/kernel -O | ubiformat "$fw_mtd" -y -S $kernel_len -f -
+
+	CI_KERNPART="none"
+	nand_do_upgrade "$1"
+}
+
+platform_do_upgrade() {
+	case "$(board_name)" in
+	8dev,jalapeno |\
+	aruba,ap-303 |\
+	aruba,ap-303h |\
+	aruba,ap-365 |\
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000 |\
+	buffalo,wtr-m2133hp |\
+	cilab,meshpoint-one |\
+	edgecore,ecw5211 |\
+	edgecore,oap100 |\
+	engenius,eap2200 |\
+	glinet,gl-a1300 |\
+	glinet,gl-ap1300 |\
+	luma,wrtq-329acn |\
+	mobipromo,cm520-79f |\
+	netgear,lbr20 |\
+	netgear,wac510 |\
+	p2w,r619ac-64m |\
+	p2w,r619ac-128m |\
+	qxwlan,e2600ac-c2 |\
+	wallys,dr40x9)
+		nand_do_upgrade "$1"
+		;;
+	glinet,gl-b2200)
+		CI_KERNPART="0:HLOS"
+		CI_ROOTPART="rootfs"
+		CI_DATAPART="rootfs_data"
+		emmc_do_upgrade "$1"
+		;;
+	alfa-network,ap120c-ac)
+		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
+		if [ "$part" = "rootfs1" ]; then
+			fw_setenv active 2 || exit 1
+			CI_UBIPART="rootfs2"
+		else
+			fw_setenv active 1 || exit 1
+			CI_UBIPART="rootfs1"
+		fi
+		nand_do_upgrade "$1"
+		;;
+	asus,map-ac2200)
+		CI_KERNPART="linux"
+		nand_do_upgrade "$1"
+		;;
+	asus,rt-ac42u |\
+	asus,rt-ac58u)
+		CI_KERNPART="linux"
+		nand_do_upgrade "$1"
+		;;
+	cellc,rtl30vw)
+		CI_UBIPART="ubifs"
+		askey_do_upgrade "$1"
+		;;
+	compex,wpj419)
+		nand_do_upgrade "$1"
+		;;
+	google,wifi)
+		export_bootdevice
+		export_partdevice CI_ROOTDEV 0
+		CI_KERNPART="kernel"
+		CI_ROOTPART="rootfs"
+		emmc_do_upgrade "$1"
+		;;
+	linksys,ea6350v3 |\
+	linksys,ea8300 |\
+	linksys,mr8300 |\
+	linksys,whw01 |\
+	linksys,whw03v2)
+		platform_do_upgrade_linksys "$1"
+		;;
+	linksys,whw03)
+		platform_do_upgrade_linksys_emmc "$1"
+		;;
+	meraki,mr33 |\
+	meraki,mr74)
+		CI_KERNPART="part.safe"
+		nand_do_upgrade "$1"
+		;;
+	mikrotik,cap-ac|\
+	mikrotik,hap-ac2|\
+	mikrotik,hap-ac3-lte6-kit|\
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac|\
+	mikrotik,wap-ac|\
+	mikrotik,wap-ac-lte|\
+	mikrotik,wap-r-ac)
+		[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
+		default_do_upgrade "$1"
+		;;
+	mikrotik,hap-ac3)
+		platform_do_upgrade_mikrotik_nand "$1"
+		;;
+	netgear,rbr40|\
+	netgear,rbs40|\
+	netgear,rbr50 |\
+	netgear,rbs50 |\
+	netgear,srr60 |\
+	netgear,srs60)
+		platform_do_upgrade_netgear_orbi_upgrade "$1"
+		;;
+	openmesh,a42 |\
+	openmesh,a62 |\
+	plasmacloud,pa1200 |\
+	plasmacloud,pa2200)
+		PART_NAME="inactive"
+		platform_do_upgrade_dualboot_datachk "$1"
+		;;
+	sony,ncp-hg100-cellular)
+		sony_emmc_do_upgrade "$1"
+		;;
+	teltonika,rutx10 |\
+	teltonika,rutx50 |\
+	zte,mf18a |\
+	zte,mf282plus |\
+	zte,mf286d |\
+	zte,mf287 |\
+	zte,mf287plus |\
+	zte,mf287pro |\
+	zte,mf289f)
+		CI_UBIPART="rootfs"
+		nand_do_upgrade "$1"
+		;;
+	zyxel,nbg6617)
+		zyxel_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}
+
+platform_copy_config() {
+	case "$(board_name)" in
+	glinet,gl-b2200 |\
+	google,wifi |\
+	linksys,whw03)
+		emmc_copy_config
+		;;
+	esac
+	return 0;
+}

target/linux/ipq40xx/base-files/lib/upgrade/sony.sh

@@ -0,0 +1,91 @@
+. /lib/functions.sh
+
+update_bootconfig() {
+	local offset=$1
+	local index="$2"
+	local cfgpart=$(find_mmc_part "0:BOOTCONFIG")
+	local cur_index
+
+	if [ -z "$cfgpart" ]; then
+		echo "failed to get the partition: \"0:BOOTCONFIG\""
+		return 1
+	fi
+
+	cur_index=$(dd if=${cfgpart} bs=1 count=1 skip=$offset 2> /dev/null | hexdump -e '"%d"')
+	if [ ${index} != ${cur_index} ]; then
+		echo "updating \"0:BOOTCONFIG\""
+		echo -en "\x0${index}" | \
+			dd of=${cfgpart} bs=1 count=1 seek=$offset conv=notrunc 2>/dev/null
+	fi
+
+	# also update 0:BOOTCONFIG1 if exists
+	cfgpart=$(find_mmc_part "0:BOOTCONFIG1")
+	[ -z "$cfgpart" ] && return
+
+	cur_index=$(dd if=${cfgpart} bs=1 count=1 skip=$offset 2> /dev/null | hexdump -e '"%d"')
+	if [ ${index} != ${cur_index} ]; then
+		echo "updating \"0:BOOTCONFIG1\""
+		echo -en "\x0${index}" | \
+			dd of=${cfgpart} bs=1 count=1 seek=$offset conv=notrunc 2>/dev/null
+	fi
+}
+
+### Note ###
+# After the commit bad1835f27ec31dbc30060b03cc714212275168a in fstools,
+# p17 (label: "rootfs_data") is mounted as a rootfs_data on boot instead
+# of the loop device labeled as "rootfs_data" in p15 (label: "rootfs").
+#
+# cmdline flag is added to avoid mount "rootfs_data" partition by the
+# commit 964d1e3af0e111bad6d393f8a3be702e334c2398 in fstools, but
+# NCP-HG100 doesn't use it because it has a large (abount 1.6GB)
+# "rootfs_data" partition and the advantage is larger than the
+# disadvantages, such as overwriting the stock data in "rootfs_data"
+# partition.
+sony_emmc_do_upgrade() {
+	local tar_file=$1
+	local kernel_dev
+	local rootfs_dev
+	local board_dir
+
+	kernel_dev=$(find_mmc_part "0:HLOS")
+	rootfs_dev=$(find_mmc_part "rootfs")
+	rootfs_data_dev=$(find_mmc_part "rootfs_data")
+
+	if [ -z "$kernel_dev" ] || [ -z "$rootfs_dev" ] || [ -z "$rootfs_data_dev" ]; then
+		echo "The partition name for kernel or rootfs or rootfs_data is not specified or failed to get the mmc device."
+		exit 1
+	fi
+
+	# use first partitions of kernel/rootfs for NCP-HG100
+	# - offset  88 (0x58): 0:HLOS (kernel)
+	# - offset 108 (0x6c): rootfs
+	update_bootconfig 88 0 || exit 1
+	update_bootconfig 108 0 || exit 1
+
+	board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	echo "Flashing kernel to ${kernel_dev}"
+	tar xf $tar_file ${board_dir}/kernel -O > $kernel_dev
+
+	echo "Flashing rootfs to ${rootfs_dev}"
+	tar xf $tar_file ${board_dir}/root -O > $rootfs_dev
+
+	echo "Format new rootfs_data"
+	mkfs.ext4 -F -L rootfs_data $rootfs_data_dev
+
+	if [ -e "$UPGRADE_BACKUP" ]; then
+		mkdir /tmp/new_root
+		mount -t ext4 $rootfs_data_dev /tmp/new_root && {
+			echo "Saving configurations to rootfs_data"
+			cp "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
+			umount /tmp/new_root
+		}
+	fi
+
+	echo "sysupgrade successful"
+
+	sync
+	umount -a
+	reboot -f
+}