Initial commit

target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh

@@ -0,0 +1,44 @@
+# Copyright (C) 2018 OpenWrt.org
+#
+
+. /lib/functions.sh
+
+# The mtd partition 'ubi' and 'rootfs_1' on NAND flash are os-image
+# partitions. These partitions are called as "Bank1/Bank2" in U-Boot
+# on WXR-2533DHP, and they are checked conditions when booting.
+# Then, U-Boot checks kernel and rootfs volumes in ubi, but U-Boot
+# needs "ubi_rootfs" as rootfs volume name. And, U-Boot checks the
+# checksum at the end of rootfs (ubi_rootfs).
+# When U-Boot writes os-image into the Bank, only kernel, rootfs
+# (ubi_rootfs) and rootfs_data (ubi_rootfs_data) volumes are wrote
+# into the Bank. (not full ubi image)
+#
+# == U-Boot Behaviors ==
+# - Bank1/Bank2 images are good, images are different
+#   -> writes os-image to Bank1 from Bank2
+#      (this behavior is used to firmware upgrade in stock firmware)
+# - Bank1 image is broken (or checksum error)
+#   -> writes os-image to Bank1 from Bank2
+# - Bank2 image is broken (or checksum error)
+#   -> writes os-image to Bank2 from Bank1
+# - Bank1/Bank2 images are broken (or checksum error)
+#   -> start tftp
+
+buffalo_upgrade_prepare_ubi() {
+	local ubidev="$( nand_find_ubi ubi )"
+	local mtdnum2="$( find_mtd_index rootfs_1 )"
+
+	if [ ! "$mtdnum2" ]; then
+		echo "cannot find second ubi mtd partition rootfs_1"
+		return 1
+	fi
+
+	local ubidev2="$( nand_find_ubi rootfs_1 )"
+	if [ ! "$ubidev2" ] && [ -n "$mtdnum2" ]; then
+		ubiattach -m "$mtdnum2"
+		ubidev2="$( nand_find_ubi rootfs_1 )"
+	fi
+
+	ubirmvol /dev/$ubidev -N ubi_rootfs_data &> /dev/null || true
+	ubirmvol /dev/$ubidev2 -N kernel &> /dev/null || true
+}